From 7d6d22db7bf177050c593e9777e6554523364bce Mon Sep 17 00:00:00 2001 From: Jay Berkenbilt Date: Fri, 23 Oct 2009 03:20:03 +0000 Subject: remove embedded external libs; replace with different mechanism git-svn-id: svn+q:///qpdf/trunk@868 71b93d88-0707-0410-a8cf-f5a4172ac649 --- external-libs/pcre/internal.h | 677 ------------------------------------------ 1 file changed, 677 deletions(-) delete mode 100644 external-libs/pcre/internal.h (limited to 'external-libs/pcre/internal.h') diff --git a/external-libs/pcre/internal.h b/external-libs/pcre/internal.h deleted file mode 100644 index d616b2dc..00000000 --- a/external-libs/pcre/internal.h +++ /dev/null @@ -1,677 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - - -/* This is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. See -the file Tech.Notes for some information on the internals. - -Written by: Philip Hazel - - Copyright (c) 1997-2003 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ -*/ - -/* This header contains definitions that are shared between the different -modules, but which are not relevant to the outside. */ - -/* Get the definitions provided by running "configure" */ - -#include "config.h" - -/* Standard C headers plus the external interface definition. The only time -setjmp and stdarg are used is when NO_RECURSE is set. */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#ifndef PCRE_SPY -#define PCRE_DEFINITION /* Win32 __declspec(export) trigger for .dll */ -#endif - -#include "pcre.h" - -/* When compiling for use with the Virtual Pascal compiler, these functions -need to have their names changed. PCRE must be compiled with the -DVPCOMPAT -option on the command line. */ - -#ifdef VPCOMPAT -#define strncmp(s1,s2,m) _strncmp(s1,s2,m) -#define memcpy(d,s,n) _memcpy(d,s,n) -#define memmove(d,s,n) _memmove(d,s,n) -#define memset(s,c,n) _memset(s,c,n) -#else /* VPCOMPAT */ - -/* To cope with SunOS4 and other systems that lack memmove() but have bcopy(), -define a macro for memmove() if HAVE_MEMMOVE is false, provided that HAVE_BCOPY -is set. Otherwise, include an emulating function for those systems that have -neither (there some non-Unix environments where this is the case). This assumes -that all calls to memmove are moving strings upwards in store, which is the -case in PCRE. */ - -#if ! HAVE_MEMMOVE -#undef memmove /* some systems may have a macro */ -#if HAVE_BCOPY -#define memmove(a, b, c) bcopy(b, a, c) -#else /* HAVE_BCOPY */ -void * -pcre_memmove(unsigned char *dest, const unsigned char *src, size_t n) -{ -int i; -dest += n; -src += n; -for (i = 0; i < n; ++i) *(--dest) = *(--src); -} -#define memmove(a, b, c) pcre_memmove(a, b, c) -#endif /* not HAVE_BCOPY */ -#endif /* not HAVE_MEMMOVE */ -#endif /* not VPCOMPAT */ - - -/* PCRE keeps offsets in its compiled code as 2-byte quantities by default. -These are used, for example, to link from the start of a subpattern to its -alternatives and its end. The use of 2 bytes per offset limits the size of the -compiled regex to around 64K, which is big enough for almost everybody. -However, I received a request for an even bigger limit. For this reason, and -also to make the code easier to maintain, the storing and loading of offsets -from the byte string is now handled by the macros that are defined here. - -The macros are controlled by the value of LINK_SIZE. This defaults to 2 in -the config.h file, but can be overridden by using -D on the command line. This -is automated on Unix systems via the "configure" command. */ - -#if LINK_SIZE == 2 - -#define PUT(a,n,d) \ - (a[n] = (d) >> 8), \ - (a[(n)+1] = (d) & 255) - -#define GET(a,n) \ - (((a)[n] << 8) | (a)[(n)+1]) - -#define MAX_PATTERN_SIZE (1 << 16) - - -#elif LINK_SIZE == 3 - -#define PUT(a,n,d) \ - (a[n] = (d) >> 16), \ - (a[(n)+1] = (d) >> 8), \ - (a[(n)+2] = (d) & 255) - -#define GET(a,n) \ - (((a)[n] << 16) | ((a)[(n)+1] << 8) | (a)[(n)+2]) - -#define MAX_PATTERN_SIZE (1 << 24) - - -#elif LINK_SIZE == 4 - -#define PUT(a,n,d) \ - (a[n] = (d) >> 24), \ - (a[(n)+1] = (d) >> 16), \ - (a[(n)+2] = (d) >> 8), \ - (a[(n)+3] = (d) & 255) - -#define GET(a,n) \ - (((a)[n] << 24) | ((a)[(n)+1] << 16) | ((a)[(n)+2] << 8) | (a)[(n)+3]) - -#define MAX_PATTERN_SIZE (1 << 30) /* Keep it positive */ - - -#else -#error LINK_SIZE must be either 2, 3, or 4 -#endif - - -/* Convenience macro defined in terms of the others */ - -#define PUTINC(a,n,d) PUT(a,n,d), a += LINK_SIZE - - -/* PCRE uses some other 2-byte quantities that do not change when the size of -offsets changes. There are used for repeat counts and for other things such as -capturing parenthesis numbers in back references. */ - -#define PUT2(a,n,d) \ - a[n] = (d) >> 8; \ - a[(n)+1] = (d) & 255 - -#define GET2(a,n) \ - (((a)[n] << 8) | (a)[(n)+1]) - -#define PUT2INC(a,n,d) PUT2(a,n,d), a += 2 - - -/* In case there is no definition of offsetof() provided - though any proper -Standard C system should have one. */ - -#ifndef offsetof -#define offsetof(p_type,field) ((size_t)&(((p_type *)0)->field)) -#endif - -/* These are the public options that can change during matching. */ - -#define PCRE_IMS (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL) - -/* Private options flags start at the most significant end of the four bytes, -but skip the top bit so we can use ints for convenience without getting tangled -with negative values. The public options defined in pcre.h start at the least -significant end. Make sure they don't overlap, though now that we have expanded -to four bytes there is plenty of space. */ - -#define PCRE_FIRSTSET 0x40000000 /* first_byte is set */ -#define PCRE_REQCHSET 0x20000000 /* req_byte is set */ -#define PCRE_STARTLINE 0x10000000 /* start after \n for multiline */ -#define PCRE_ICHANGED 0x08000000 /* i option changes within regex */ - -/* Options for the "extra" block produced by pcre_study(). */ - -#define PCRE_STUDY_MAPPED 0x01 /* a map of starting chars exists */ - -/* Masks for identifying the public options which are permitted at compile -time, run time or study time, respectively. */ - -#define PUBLIC_OPTIONS \ - (PCRE_CASELESS|PCRE_EXTENDED|PCRE_ANCHORED|PCRE_MULTILINE| \ - PCRE_DOTALL|PCRE_DOLLAR_ENDONLY|PCRE_EXTRA|PCRE_UNGREEDY|PCRE_UTF8| \ - PCRE_NO_AUTO_CAPTURE|PCRE_NO_UTF8_CHECK) - -#define PUBLIC_EXEC_OPTIONS \ - (PCRE_ANCHORED|PCRE_NOTBOL|PCRE_NOTEOL|PCRE_NOTEMPTY|PCRE_NO_UTF8_CHECK) - -#define PUBLIC_STUDY_OPTIONS 0 /* None defined */ - -/* Magic number to provide a small check against being handed junk. */ - -#define MAGIC_NUMBER 0x50435245UL /* 'PCRE' */ - -/* Negative values for the firstchar and reqchar variables */ - -#define REQ_UNSET (-2) -#define REQ_NONE (-1) - -/* Flags added to firstbyte or reqbyte; a "non-literal" item is either a -variable-length repeat, or a anything other than literal characters. */ - -#define REQ_CASELESS 0x0100 /* indicates caselessness */ -#define REQ_VARY 0x0200 /* reqbyte followed non-literal item */ - -/* Miscellaneous definitions */ - -typedef int BOOL; - -#define FALSE 0 -#define TRUE 1 - -/* Escape items that are just an encoding of a particular data value. Note that -ESC_n is defined as yet another macro, which is set in config.h to either \n -(the default) or \r (which some people want). */ - -#ifndef ESC_e -#define ESC_e 27 -#endif - -#ifndef ESC_f -#define ESC_f '\f' -#endif - -#ifndef ESC_n -#define ESC_n NEWLINE -#endif - -#ifndef ESC_r -#define ESC_r '\r' -#endif - -/* We can't officially use ESC_t because it is a POSIX reserved identifier -(presumably because of all the others like size_t). */ - -#ifndef ESC_tee -#define ESC_tee '\t' -#endif - -/* These are escaped items that aren't just an encoding of a particular data -value such as \n. They must have non-zero values, as check_escape() returns -their negation. Also, they must appear in the same order as in the opcode -definitions below, up to ESC_z. There's a dummy for OP_ANY because it -corresponds to "." rather than an escape sequence. The final one must be -ESC_REF as subsequent values are used for \1, \2, \3, etc. There is are two -tests in the code for an escape greater than ESC_b and less than ESC_Z to -detect the types that may be repeated. These are the types that consume a -character. If any new escapes are put in between that don't consume a -character, that code will have to change. */ - -enum { ESC_A = 1, ESC_G, ESC_B, ESC_b, ESC_D, ESC_d, ESC_S, ESC_s, ESC_W, - ESC_w, ESC_dum1, ESC_C, ESC_Z, ESC_z, ESC_E, ESC_Q, ESC_REF }; - -/* Flag bits and data types for the extended class (OP_XCLASS) for classes that -contain UTF-8 characters with values greater than 255. */ - -#define XCL_NOT 0x01 /* Flag: this is a negative class */ -#define XCL_MAP 0x02 /* Flag: a 32-byte map is present */ - -#define XCL_END 0 /* Marks end of individual items */ -#define XCL_SINGLE 1 /* Single item (one multibyte char) follows */ -#define XCL_RANGE 2 /* A range (two multibyte chars) follows */ - - -/* Opcode table: OP_BRA must be last, as all values >= it are used for brackets -that extract substrings. Starting from 1 (i.e. after OP_END), the values up to -OP_EOD must correspond in order to the list of escapes immediately above. -Note that whenever this list is updated, the two macro definitions that follow -must also be updated to match. */ - -enum { - OP_END, /* 0 End of pattern */ - - /* Values corresponding to backslashed metacharacters */ - - OP_SOD, /* 1 Start of data: \A */ - OP_SOM, /* 2 Start of match (subject + offset): \G */ - OP_NOT_WORD_BOUNDARY, /* 3 \B */ - OP_WORD_BOUNDARY, /* 4 \b */ - OP_NOT_DIGIT, /* 5 \D */ - OP_DIGIT, /* 6 \d */ - OP_NOT_WHITESPACE, /* 7 \S */ - OP_WHITESPACE, /* 8 \s */ - OP_NOT_WORDCHAR, /* 9 \W */ - OP_WORDCHAR, /* 10 \w */ - OP_ANY, /* 11 Match any character */ - OP_ANYBYTE, /* 12 Match any byte (\C); different to OP_ANY for UTF-8 */ - OP_EODN, /* 13 End of data or \n at end of data: \Z. */ - OP_EOD, /* 14 End of data: \z */ - - OP_OPT, /* 15 Set runtime options */ - OP_CIRC, /* 16 Start of line - varies with multiline switch */ - OP_DOLL, /* 17 End of line - varies with multiline switch */ - OP_CHARS, /* 18 Match string of characters */ - OP_NOT, /* 19 Match anything but the following char */ - - OP_STAR, /* 20 The maximizing and minimizing versions of */ - OP_MINSTAR, /* 21 all these opcodes must come in pairs, with */ - OP_PLUS, /* 22 the minimizing one second. */ - OP_MINPLUS, /* 23 This first set applies to single characters */ - OP_QUERY, /* 24 */ - OP_MINQUERY, /* 25 */ - OP_UPTO, /* 26 From 0 to n matches */ - OP_MINUPTO, /* 27 */ - OP_EXACT, /* 28 Exactly n matches */ - - OP_NOTSTAR, /* 29 The maximizing and minimizing versions of */ - OP_NOTMINSTAR, /* 30 all these opcodes must come in pairs, with */ - OP_NOTPLUS, /* 31 the minimizing one second. */ - OP_NOTMINPLUS, /* 32 This set applies to "not" single characters */ - OP_NOTQUERY, /* 33 */ - OP_NOTMINQUERY, /* 34 */ - OP_NOTUPTO, /* 35 From 0 to n matches */ - OP_NOTMINUPTO, /* 36 */ - OP_NOTEXACT, /* 37 Exactly n matches */ - - OP_TYPESTAR, /* 38 The maximizing and minimizing versions of */ - OP_TYPEMINSTAR, /* 39 all these opcodes must come in pairs, with */ - OP_TYPEPLUS, /* 40 the minimizing one second. These codes must */ - OP_TYPEMINPLUS, /* 41 be in exactly the same order as those above. */ - OP_TYPEQUERY, /* 42 This set applies to character types such as \d */ - OP_TYPEMINQUERY, /* 43 */ - OP_TYPEUPTO, /* 44 From 0 to n matches */ - OP_TYPEMINUPTO, /* 45 */ - OP_TYPEEXACT, /* 46 Exactly n matches */ - - OP_CRSTAR, /* 47 The maximizing and minimizing versions of */ - OP_CRMINSTAR, /* 48 all these opcodes must come in pairs, with */ - OP_CRPLUS, /* 49 the minimizing one second. These codes must */ - OP_CRMINPLUS, /* 50 be in exactly the same order as those above. */ - OP_CRQUERY, /* 51 These are for character classes and back refs */ - OP_CRMINQUERY, /* 52 */ - OP_CRRANGE, /* 53 These are different to the three seta above. */ - OP_CRMINRANGE, /* 54 */ - - OP_CLASS, /* 55 Match a character class, chars < 256 only */ - OP_NCLASS, /* 56 Same, but the bitmap was created from a negative - class - the difference is relevant only when a UTF-8 - character > 255 is encountered. */ - - OP_XCLASS, /* 57 Extended class for handling UTF-8 chars within the - class. This does both positive and negative. */ - - OP_REF, /* 58 Match a back reference */ - OP_RECURSE, /* 59 Match a numbered subpattern (possibly recursive) */ - OP_CALLOUT, /* 60 Call out to external function if provided */ - - OP_ALT, /* 61 Start of alternation */ - OP_KET, /* 62 End of group that doesn't have an unbounded repeat */ - OP_KETRMAX, /* 63 These two must remain together and in this */ - OP_KETRMIN, /* 64 order. They are for groups the repeat for ever. */ - - /* The assertions must come before ONCE and COND */ - - OP_ASSERT, /* 65 Positive lookahead */ - OP_ASSERT_NOT, /* 66 Negative lookahead */ - OP_ASSERTBACK, /* 67 Positive lookbehind */ - OP_ASSERTBACK_NOT, /* 68 Negative lookbehind */ - OP_REVERSE, /* 69 Move pointer back - used in lookbehind assertions */ - - /* ONCE and COND must come after the assertions, with ONCE first, as there's - a test for >= ONCE for a subpattern that isn't an assertion. */ - - OP_ONCE, /* 70 Once matched, don't back up into the subpattern */ - OP_COND, /* 71 Conditional group */ - OP_CREF, /* 72 Used to hold an extraction string number (cond ref) */ - - OP_BRAZERO, /* 73 These two must remain together and in this */ - OP_BRAMINZERO, /* 74 order. */ - - OP_BRANUMBER, /* 75 Used for extracting brackets whose number is greater - than can fit into an opcode. */ - - OP_BRA /* 76 This and greater values are used for brackets that - extract substrings up to a basic limit. After that, - use is made of OP_BRANUMBER. */ -}; - -/* WARNING: There is an implicit assumption in study.c that all opcodes are -less than 128 in value. This makes handling UTF-8 character sequences easier. -*/ - - -/* This macro defines textual names for all the opcodes. There are used only -for debugging, in pcre.c when DEBUG is defined, and also in pcretest.c. The -macro is referenced only in printint.c. */ - -#define OP_NAME_LIST \ - "End", "\\A", "\\G", "\\B", "\\b", "\\D", "\\d", \ - "\\S", "\\s", "\\W", "\\w", "Any", "Anybyte", "\\Z", "\\z", \ - "Opt", "^", "$", "chars", "not", \ - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \ - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \ - "*", "*?", "+", "+?", "?", "??", "{", "{", "{", \ - "*", "*?", "+", "+?", "?", "??", "{", "{", \ - "class", "nclass", "xclass", "Ref", "Recurse", "Callout", \ - "Alt", "Ket", "KetRmax", "KetRmin", "Assert", "Assert not", \ - "AssertB", "AssertB not", "Reverse", "Once", "Cond", "Cond ref",\ - "Brazero", "Braminzero", "Branumber", "Bra" - - -/* This macro defines the length of fixed length operations in the compiled -regex. The lengths are used when searching for specific things, and also in the -debugging printing of a compiled regex. We use a macro so that it can be -incorporated both into pcre.c and pcretest.c without being publicly exposed. - -As things have been extended, some of these are no longer fixed lenths, but are -minima instead. For example, the length of a single-character repeat may vary -in UTF-8 mode. The code that uses this table must know about such things. */ - -#define OP_LENGTHS \ - 1, /* End */ \ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, /* \A, \G, \B, \B, \D, \d, \S, \s, \W, \w */ \ - 1, 1, 1, 1, 2, 1, 1, /* Any, Anybyte, \Z, \z, Opt, ^, $ */ \ - 2, /* Chars - the minimum length */ \ - 2, /* not */ \ - /* Positive single-char repeats ** These are */ \ - 2, 2, 2, 2, 2, 2, /* *, *?, +, +?, ?, ?? ** minima in */ \ - 4, 4, 4, /* upto, minupto, exact ** UTF-8 mode */ \ - /* Negative single-char repeats - only for chars < 256 */ \ - 2, 2, 2, 2, 2, 2, /* NOT *, *?, +, +?, ?, ?? */ \ - 4, 4, 4, /* NOT upto, minupto, exact */ \ - /* Positive type repeats */ \ - 2, 2, 2, 2, 2, 2, /* Type *, *?, +, +?, ?, ?? */ \ - 4, 4, 4, /* Type upto, minupto, exact */ \ - /* Character class & ref repeats */ \ - 1, 1, 1, 1, 1, 1, /* *, *?, +, +?, ?, ?? */ \ - 5, 5, /* CRRANGE, CRMINRANGE */ \ - 33, /* CLASS */ \ - 33, /* NCLASS */ \ - 0, /* XCLASS - variable length */ \ - 3, /* REF */ \ - 1+LINK_SIZE, /* RECURSE */ \ - 2, /* CALLOUT */ \ - 1+LINK_SIZE, /* Alt */ \ - 1+LINK_SIZE, /* Ket */ \ - 1+LINK_SIZE, /* KetRmax */ \ - 1+LINK_SIZE, /* KetRmin */ \ - 1+LINK_SIZE, /* Assert */ \ - 1+LINK_SIZE, /* Assert not */ \ - 1+LINK_SIZE, /* Assert behind */ \ - 1+LINK_SIZE, /* Assert behind not */ \ - 1+LINK_SIZE, /* Reverse */ \ - 1+LINK_SIZE, /* Once */ \ - 1+LINK_SIZE, /* COND */ \ - 3, /* CREF */ \ - 1, 1, /* BRAZERO, BRAMINZERO */ \ - 3, /* BRANUMBER */ \ - 1+LINK_SIZE /* BRA */ \ - - -/* The highest extraction number before we have to start using additional -bytes. (Originally PCRE didn't have support for extraction counts highter than -this number.) The value is limited by the number of opcodes left after OP_BRA, -i.e. 255 - OP_BRA. We actually set it a bit lower to leave room for additional -opcodes. */ - -#define EXTRACT_BASIC_MAX 150 - -/* A magic value for OP_CREF to indicate the "in recursion" condition. */ - -#define CREF_RECURSE 0xffff - -/* The texts of compile-time error messages are defined as macros here so that -they can be accessed by the POSIX wrapper and converted into error codes. Yes, -I could have used error codes in the first place, but didn't feel like changing -just to accommodate the POSIX wrapper. */ - -#define ERR1 "\\ at end of pattern" -#define ERR2 "\\c at end of pattern" -#define ERR3 "unrecognized character follows \\" -#define ERR4 "numbers out of order in {} quantifier" -#define ERR5 "number too big in {} quantifier" -#define ERR6 "missing terminating ] for character class" -#define ERR7 "invalid escape sequence in character class" -#define ERR8 "range out of order in character class" -#define ERR9 "nothing to repeat" -#define ERR10 "operand of unlimited repeat could match the empty string" -#define ERR11 "internal error: unexpected repeat" -#define ERR12 "unrecognized character after (?" -#define ERR13 "POSIX named classes are supported only within a class" -#define ERR14 "missing )" -#define ERR15 "reference to non-existent subpattern" -#define ERR16 "erroffset passed as NULL" -#define ERR17 "unknown option bit(s) set" -#define ERR18 "missing ) after comment" -#define ERR19 "parentheses nested too deeply" -#define ERR20 "regular expression too large" -#define ERR21 "failed to get memory" -#define ERR22 "unmatched parentheses" -#define ERR23 "internal error: code overflow" -#define ERR24 "unrecognized character after (?<" -#define ERR25 "lookbehind assertion is not fixed length" -#define ERR26 "malformed number after (?(" -#define ERR27 "conditional group contains more than two branches" -#define ERR28 "assertion expected after (?(" -#define ERR29 "(?R or (?digits must be followed by )" -#define ERR30 "unknown POSIX class name" -#define ERR31 "POSIX collating elements are not supported" -#define ERR32 "this version of PCRE is not compiled with PCRE_UTF8 support" -#define ERR33 "spare error" -#define ERR34 "character value in \\x{...} sequence is too large" -#define ERR35 "invalid condition (?(0)" -#define ERR36 "\\C not allowed in lookbehind assertion" -#define ERR37 "PCRE does not support \\L, \\l, \\N, \\P, \\p, \\U, \\u, or \\X" -#define ERR38 "number after (?C is > 255" -#define ERR39 "closing ) for (?C expected" -#define ERR40 "recursive call could loop indefinitely" -#define ERR41 "unrecognized character after (?P" -#define ERR42 "syntax error after (?P" -#define ERR43 "two named groups have the same name" -#define ERR44 "invalid UTF-8 string" - -/* All character handling must be done as unsigned characters. Otherwise there -are problems with top-bit-set characters and functions such as isspace(). -However, we leave the interface to the outside world as char *, because that -should make things easier for callers. We define a short type for unsigned char -to save lots of typing. I tried "uchar", but it causes problems on Digital -Unix, where it is defined in sys/types, so use "uschar" instead. */ - -typedef unsigned char uschar; - -/* The real format of the start of the pcre block; the index of names and the -code vector run on as long as necessary after the end. */ - -typedef struct real_pcre { - unsigned long int magic_number; - size_t size; /* Total that was malloced */ - const unsigned char *tables; /* Pointer to tables */ - unsigned long int options; - unsigned short int top_bracket; - unsigned short int top_backref; - unsigned short int first_byte; - unsigned short int req_byte; - unsigned short int name_entry_size; /* Size of any name items; 0 => none */ - unsigned short int name_count; /* Number of name items */ -} real_pcre; - -/* The format of the block used to store data from pcre_study(). */ - -typedef struct pcre_study_data { - size_t size; /* Total that was malloced */ - uschar options; - uschar start_bits[32]; -} pcre_study_data; - -/* Structure for passing "static" information around between the functions -doing the compiling, so that they are thread-safe. */ - -typedef struct compile_data { - const uschar *lcc; /* Points to lower casing table */ - const uschar *fcc; /* Points to case-flipping table */ - const uschar *cbits; /* Points to character type table */ - const uschar *ctypes; /* Points to table of type maps */ - const uschar *start_code; /* The start of the compiled code */ - uschar *name_table; /* The name/number table */ - int names_found; /* Number of entries so far */ - int name_entry_size; /* Size of each entry */ - int top_backref; /* Maximum back reference */ - unsigned int backref_map; /* Bitmap of low back refs */ - int req_varyopt; /* "After variable item" flag for reqbyte */ -} compile_data; - -/* Structure for maintaining a chain of pointers to the currently incomplete -branches, for testing for left recursion. */ - -typedef struct branch_chain { - struct branch_chain *outer; - uschar *current; -} branch_chain; - -/* Structure for items in a linked list that represents an explicit recursive -call within the pattern. */ - -typedef struct recursion_info { - struct recursion_info *prevrec; /* Previous recursion record (or NULL) */ - int group_num; /* Number of group that was called */ - const uschar *after_call; /* "Return value": points after the call in the expr */ - const uschar *save_start; /* Old value of md->start_match */ - int *offset_save; /* Pointer to start of saved offsets */ - int saved_max; /* Number of saved offsets */ -} recursion_info; - -/* When compiling in a mode that doesn't use recursive calls to match(), -a structure is used to remember local variables on the heap. It is defined in -pcre.c, close to the match() function, so that it is easy to keep it in step -with any changes of local variable. However, the pointer to the current frame -must be saved in some "static" place over a longjmp(). We declare the -structure here so that we can put a pointer in the match_data structure. -NOTE: This isn't used for a "normal" compilation of pcre. */ - -struct heapframe; - -/* Structure for passing "static" information around between the functions -doing the matching, so that they are thread-safe. */ - -typedef struct match_data { - unsigned long int match_call_count; /* As it says */ - unsigned long int match_limit;/* As it says */ - int *offset_vector; /* Offset vector */ - int offset_end; /* One past the end */ - int offset_max; /* The maximum usable for return data */ - const uschar *lcc; /* Points to lower casing table */ - const uschar *ctypes; /* Points to table of type maps */ - BOOL offset_overflow; /* Set if too many extractions */ - BOOL notbol; /* NOTBOL flag */ - BOOL noteol; /* NOTEOL flag */ - BOOL utf8; /* UTF8 flag */ - BOOL endonly; /* Dollar not before final \n */ - BOOL notempty; /* Empty string match not wanted */ - const uschar *start_code; /* For use when recursing */ - const uschar *start_subject; /* Start of the subject string */ - const uschar *end_subject; /* End of the subject string */ - const uschar *start_match; /* Start of this match attempt */ - const uschar *end_match_ptr; /* Subject position at end match */ - int end_offset_top; /* Highwater mark at end of match */ - int capture_last; /* Most recent capture number */ - int start_offset; /* The start offset value */ - recursion_info *recursive; /* Linked list of recursion data */ - void *callout_data; /* To pass back to callouts */ - struct heapframe *thisframe; /* Used only when compiling for no recursion */ -} match_data; - -/* Bit definitions for entries in the pcre_ctypes table. */ - -#define ctype_space 0x01 -#define ctype_letter 0x02 -#define ctype_digit 0x04 -#define ctype_xdigit 0x08 -#define ctype_word 0x10 /* alphameric or '_' */ -#define ctype_meta 0x80 /* regexp meta char or zero (end pattern) */ - -/* Offsets for the bitmap tables in pcre_cbits. Each table contains a set -of bits for a class map. Some classes are built by combining these tables. */ - -#define cbit_space 0 /* [:space:] or \s */ -#define cbit_xdigit 32 /* [:xdigit:] */ -#define cbit_digit 64 /* [:digit:] or \d */ -#define cbit_upper 96 /* [:upper:] */ -#define cbit_lower 128 /* [:lower:] */ -#define cbit_word 160 /* [:word:] or \w */ -#define cbit_graph 192 /* [:graph:] */ -#define cbit_print 224 /* [:print:] */ -#define cbit_punct 256 /* [:punct:] */ -#define cbit_cntrl 288 /* [:cntrl:] */ -#define cbit_length 320 /* Length of the cbits table */ - -/* Offsets of the various tables from the base tables pointer, and -total length. */ - -#define lcc_offset 0 -#define fcc_offset 256 -#define cbits_offset 512 -#define ctypes_offset (cbits_offset + cbit_length) -#define tables_length (ctypes_offset + 256) - -/* End of internal.h */ -- cgit v1.2.3-70-g09d2