From 7d6d22db7bf177050c593e9777e6554523364bce Mon Sep 17 00:00:00 2001 From: Jay Berkenbilt Date: Fri, 23 Oct 2009 03:20:03 +0000 Subject: remove embedded external libs; replace with different mechanism git-svn-id: svn+q:///qpdf/trunk@868 71b93d88-0707-0410-a8cf-f5a4172ac649 --- external-libs/pcre/pcre.c | 8304 --------------------------------------------- 1 file changed, 8304 deletions(-) delete mode 100644 external-libs/pcre/pcre.c (limited to 'external-libs/pcre/pcre.c') diff --git a/external-libs/pcre/pcre.c b/external-libs/pcre/pcre.c deleted file mode 100644 index 5afca109..00000000 --- a/external-libs/pcre/pcre.c +++ /dev/null @@ -1,8304 +0,0 @@ -/************************************************* -* Perl-Compatible Regular Expressions * -*************************************************/ - -/* -This is a library of functions to support regular expressions whose syntax -and semantics are as close as possible to those of the Perl 5 language. See -the file Tech.Notes for some information on the internals. - -Written by: Philip Hazel - - Copyright (c) 1997-2003 University of Cambridge - ------------------------------------------------------------------------------ -Permission is granted to anyone to use this software for any purpose on any -computer system, and to redistribute it freely, subject to the following -restrictions: - -1. This software is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - -2. The origin of this software must not be misrepresented, either by - explicit claim or by omission. - -3. Altered versions must be plainly marked as such, and must not be - misrepresented as being the original software. - -4. If PCRE is embedded in any software that is released under the GNU - General Purpose Licence (GPL), then the terms of that licence shall - supersede any condition above with which it is incompatible. ------------------------------------------------------------------------------ -*/ - - -/* Define DEBUG to get debugging output on stdout. */ -/* #define DEBUG */ - -/* Use a macro for debugging printing, 'cause that eliminates the use of #ifdef -inline, and there are *still* stupid compilers about that don't like indented -pre-processor statements. I suppose it's only been 10 years... */ - -#ifdef DEBUG -#define DPRINTF(p) printf p -#else -#define DPRINTF(p) /*nothing*/ -#endif - -/* Include the internals header, which itself includes "config.h", the Standard -C headers, and the external pcre header. */ - -#include "internal.h" - - -/* Allow compilation as C++ source code, should anybody want to do that. */ - -#ifdef __cplusplus -#define class pcre_class -#endif - - -/* Maximum number of items on the nested bracket stacks at compile time. This -applies to the nesting of all kinds of parentheses. It does not limit -un-nested, non-capturing parentheses. This number can be made bigger if -necessary - it is used to dimension one int and one unsigned char vector at -compile time. */ - -#define BRASTACK_SIZE 200 - - -/* Maximum number of ints of offset to save on the stack for recursive calls. -If the offset vector is bigger, malloc is used. This should be a multiple of 3, -because the offset vector is always a multiple of 3 long. */ - -#define REC_STACK_SAVE_MAX 30 - - -/* The number of bytes in a literal character string above which we can't add -any more is set at 250 in order to allow for UTF-8 characters. (In theory it -could be 255 when UTF-8 support is excluded, but that means that some of the -test output would be different, which just complicates things.) */ - -#define MAXLIT 250 - - -/* The maximum remaining length of subject we are prepared to search for a -req_byte match. */ - -#define REQ_BYTE_MAX 1000 - - -/* Table of sizes for the fixed-length opcodes. It's defined in a macro so that -the definition is next to the definition of the opcodes in internal.h. */ - -static const uschar OP_lengths[] = { OP_LENGTHS }; - -/* Min and max values for the common repeats; for the maxima, 0 => infinity */ - -static const char rep_min[] = { 0, 0, 1, 1, 0, 0 }; -static const char rep_max[] = { 0, 0, 0, 0, 1, 1 }; - -/* Table for handling escaped characters in the range '0'-'z'. Positive returns -are simple data values; negative values are for special things like \d and so -on. Zero means further processing is needed (for things like \x), or the escape -is invalid. */ - -#if !EBCDIC /* This is the "normal" table for ASCII systems */ -static const short int escapes[] = { - 0, 0, 0, 0, 0, 0, 0, 0, /* 0 - 7 */ - 0, 0, ':', ';', '<', '=', '>', '?', /* 8 - ? */ - '@', -ESC_A, -ESC_B, -ESC_C, -ESC_D, -ESC_E, 0, -ESC_G, /* @ - G */ - 0, 0, 0, 0, 0, 0, 0, 0, /* H - O */ - 0, -ESC_Q, 0, -ESC_S, 0, 0, 0, -ESC_W, /* P - W */ - 0, 0, -ESC_Z, '[', '\\', ']', '^', '_', /* X - _ */ - '`', 7, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0, /* ` - g */ - 0, 0, 0, 0, 0, 0, ESC_n, 0, /* h - o */ - 0, 0, ESC_r, -ESC_s, ESC_tee, 0, 0, -ESC_w, /* p - w */ - 0, 0, -ESC_z /* x - z */ -}; - -#else /* This is the "abnormal" table for EBCDIC systems */ -static const short int escapes[] = { -/* 48 */ 0, 0, 0, '.', '<', '(', '+', '|', -/* 50 */ '&', 0, 0, 0, 0, 0, 0, 0, -/* 58 */ 0, 0, '!', '$', '*', ')', ';', '~', -/* 60 */ '-', '/', 0, 0, 0, 0, 0, 0, -/* 68 */ 0, 0, '|', ',', '%', '_', '>', '?', -/* 70 */ 0, 0, 0, 0, 0, 0, 0, 0, -/* 78 */ 0, '`', ':', '#', '@', '\'', '=', '"', -/* 80 */ 0, 7, -ESC_b, 0, -ESC_d, ESC_e, ESC_f, 0, -/* 88 */ 0, 0, 0, '{', 0, 0, 0, 0, -/* 90 */ 0, 0, 0, 'l', 0, ESC_n, 0, 0, -/* 98 */ 0, ESC_r, 0, '}', 0, 0, 0, 0, -/* A0 */ 0, '~', -ESC_s, ESC_tee, 0, 0, -ESC_w, 0, -/* A8 */ 0,-ESC_z, 0, 0, 0, '[', 0, 0, -/* B0 */ 0, 0, 0, 0, 0, 0, 0, 0, -/* B8 */ 0, 0, 0, 0, 0, ']', '=', '-', -/* C0 */ '{',-ESC_A, -ESC_B, -ESC_C, -ESC_D,-ESC_E, 0, -ESC_G, -/* C8 */ 0, 0, 0, 0, 0, 0, 0, 0, -/* D0 */ '}', 0, 0, 0, 0, 0, 0, 0, -/* D8 */-ESC_Q, 0, 0, 0, 0, 0, 0, 0, -/* E0 */ '\\', 0, -ESC_S, 0, 0, 0, -ESC_W, 0, -/* E8 */ 0,-ESC_Z, 0, 0, 0, 0, 0, 0, -/* F0 */ 0, 0, 0, 0, 0, 0, 0, 0, -/* F8 */ 0, 0, 0, 0, 0, 0, 0, 0 -}; -#endif - - -/* Tables of names of POSIX character classes and their lengths. The list is -terminated by a zero length entry. The first three must be alpha, upper, lower, -as this is assumed for handling case independence. */ - -static const char *const posix_names[] = { - "alpha", "lower", "upper", - "alnum", "ascii", "blank", "cntrl", "digit", "graph", - "print", "punct", "space", "word", "xdigit" }; - -static const uschar posix_name_lengths[] = { - 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 5, 4, 6, 0 }; - -/* Table of class bit maps for each POSIX class; up to three may be combined -to form the class. The table for [:blank:] is dynamically modified to remove -the vertical space characters. */ - -static const int posix_class_maps[] = { - cbit_lower, cbit_upper, -1, /* alpha */ - cbit_lower, -1, -1, /* lower */ - cbit_upper, -1, -1, /* upper */ - cbit_digit, cbit_lower, cbit_upper, /* alnum */ - cbit_print, cbit_cntrl, -1, /* ascii */ - cbit_space, -1, -1, /* blank - a GNU extension */ - cbit_cntrl, -1, -1, /* cntrl */ - cbit_digit, -1, -1, /* digit */ - cbit_graph, -1, -1, /* graph */ - cbit_print, -1, -1, /* print */ - cbit_punct, -1, -1, /* punct */ - cbit_space, -1, -1, /* space */ - cbit_word, -1, -1, /* word - a Perl extension */ - cbit_xdigit,-1, -1 /* xdigit */ -}; - -/* Table to identify digits and hex digits. This is used when compiling -patterns. Note that the tables in chartables are dependent on the locale, and -may mark arbitrary characters as digits - but the PCRE compiling code expects -to handle only 0-9, a-z, and A-Z as digits when compiling. That is why we have -a private table here. It costs 256 bytes, but it is a lot faster than doing -character value tests (at least in some simple cases I timed), and in some -applications one wants PCRE to compile efficiently as well as match -efficiently. - -For convenience, we use the same bit definitions as in chartables: - - 0x04 decimal digit - 0x08 hexadecimal digit - -Then we can use ctype_digit and ctype_xdigit in the code. */ - -#if !EBCDIC /* This is the "normal" case, for ASCII systems */ -static const unsigned char digitab[] = - { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 8- 15 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - ' */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ( - / */ - 0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /* 0 - 7 */ - 0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00, /* 8 - ? */ - 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* @ - G */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* H - O */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* P - W */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* X - _ */ - 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* ` - g */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* h - o */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* p - w */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* x -127 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 128-135 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 136-143 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144-151 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 152-159 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160-167 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 168-175 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 176-183 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 192-199 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 200-207 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 208-215 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 216-223 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 224-231 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 232-239 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 240-247 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};/* 248-255 */ - -#else /* This is the "abnormal" case, for EBCDIC systems */ -static const unsigned char digitab[] = - { - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 0- 7 0 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 8- 15 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 16- 23 10 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 32- 39 20 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 40- 47 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 48- 55 30 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 56- 63 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - 71 40 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 72- | */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* & - 87 50 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 88- ¬ */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - -103 60 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 104- ? */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 70 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- " */ - 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* 128- g 80 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* h -143 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 144- p 90 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* q -159 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 160- x A0 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* y -175 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ^ -183 B0 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 184-191 */ - 0x00,0x08,0x08,0x08,0x08,0x08,0x08,0x00, /* { - G C0 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* H -207 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* } - P D0 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Q -223 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* \ - X E0 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* Y -239 */ - 0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c,0x0c, /* 0 - 7 F0 */ - 0x0c,0x0c,0x00,0x00,0x00,0x00,0x00,0x00};/* 8 -255 */ - -static const unsigned char ebcdic_chartab[] = { /* chartable partial dup */ - 0x80,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 0- 7 */ - 0x00,0x00,0x00,0x00,0x01,0x01,0x00,0x00, /* 8- 15 */ - 0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 16- 23 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 24- 31 */ - 0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00, /* 32- 39 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 40- 47 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 48- 55 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 56- 63 */ - 0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - 71 */ - 0x00,0x00,0x00,0x80,0x00,0x80,0x80,0x80, /* 72- | */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* & - 87 */ - 0x00,0x00,0x00,0x80,0x80,0x80,0x00,0x00, /* 88- ¬ */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* - -103 */ - 0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x80, /* 104- ? */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 112-119 */ - 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* 120- " */ - 0x00,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* 128- g */ - 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* h -143 */ - 0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* 144- p */ - 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* q -159 */ - 0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /* 160- x */ - 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* y -175 */ - 0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00, /* ^ -183 */ - 0x00,0x00,0x80,0x00,0x00,0x00,0x00,0x00, /* 184-191 */ - 0x80,0x1a,0x1a,0x1a,0x1a,0x1a,0x1a,0x12, /* { - G */ - 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* H -207 */ - 0x00,0x12,0x12,0x12,0x12,0x12,0x12,0x12, /* } - P */ - 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* Q -223 */ - 0x00,0x00,0x12,0x12,0x12,0x12,0x12,0x12, /* \ - X */ - 0x12,0x12,0x00,0x00,0x00,0x00,0x00,0x00, /* Y -239 */ - 0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c,0x1c, /* 0 - 7 */ - 0x1c,0x1c,0x00,0x00,0x00,0x00,0x00,0x00};/* 8 -255 */ -#endif - - -/* Definition to allow mutual recursion */ - -static BOOL - compile_regex(int, int, int *, uschar **, const uschar **, const char **, - BOOL, int, int *, int *, branch_chain *, compile_data *); - -/* Structure for building a chain of data that actually lives on the -stack, for holding the values of the subject pointer at the start of each -subpattern, so as to detect when an empty string has been matched by a -subpattern - to break infinite loops. When NO_RECURSE is set, these blocks -are on the heap, not on the stack. */ - -typedef struct eptrblock { - struct eptrblock *epb_prev; - const uschar *epb_saved_eptr; -} eptrblock; - -/* Flag bits for the match() function */ - -#define match_condassert 0x01 /* Called to check a condition assertion */ -#define match_isgroup 0x02 /* Set if start of bracketed group */ - -/* Non-error returns from the match() function. Error returns are externally -defined PCRE_ERROR_xxx codes, which are all negative. */ - -#define MATCH_MATCH 1 -#define MATCH_NOMATCH 0 - - - -/************************************************* -* Global variables * -*************************************************/ - -/* PCRE is thread-clean and doesn't use any global variables in the normal -sense. However, it calls memory allocation and free functions via the four -indirections below, and it can optionally do callouts. These values can be -changed by the caller, but are shared between all threads. However, when -compiling for Virtual Pascal, things are done differently (see pcre.in). */ - -#ifndef VPCOMPAT -#ifdef __cplusplus -extern "C" void *(*pcre_malloc)(size_t) = malloc; -extern "C" void (*pcre_free)(void *) = free; -extern "C" void *(*pcre_stack_malloc)(size_t) = malloc; -extern "C" void (*pcre_stack_free)(void *) = free; -extern "C" int (*pcre_callout)(pcre_callout_block *) = NULL; -#else -void *(*pcre_malloc)(size_t) = malloc; -void (*pcre_free)(void *) = free; -void *(*pcre_stack_malloc)(size_t) = malloc; -void (*pcre_stack_free)(void *) = free; -int (*pcre_callout)(pcre_callout_block *) = NULL; -#endif -#endif - - -/************************************************* -* Macros and tables for character handling * -*************************************************/ - -/* When UTF-8 encoding is being used, a character is no longer just a single -byte. The macros for character handling generate simple sequences when used in -byte-mode, and more complicated ones for UTF-8 characters. */ - -#ifndef SUPPORT_UTF8 -#define GETCHAR(c, eptr) c = *eptr; -#define GETCHARINC(c, eptr) c = *eptr++; -#define GETCHARINCTEST(c, eptr) c = *eptr++; -#define GETCHARLEN(c, eptr, len) c = *eptr; -#define BACKCHAR(eptr) - -#else /* SUPPORT_UTF8 */ - -/* Get the next UTF-8 character, not advancing the pointer. This is called when -we know we are in UTF-8 mode. */ - -#define GETCHAR(c, eptr) \ - c = *eptr; \ - if ((c & 0xc0) == 0xc0) \ - { \ - int gcii; \ - int gcaa = utf8_table4[c & 0x3f]; /* Number of additional bytes */ \ - int gcss = 6*gcaa; \ - c = (c & utf8_table3[gcaa]) << gcss; \ - for (gcii = 1; gcii <= gcaa; gcii++) \ - { \ - gcss -= 6; \ - c |= (eptr[gcii] & 0x3f) << gcss; \ - } \ - } - -/* Get the next UTF-8 character, advancing the pointer. This is called when we -know we are in UTF-8 mode. */ - -#define GETCHARINC(c, eptr) \ - c = *eptr++; \ - if ((c & 0xc0) == 0xc0) \ - { \ - int gcaa = utf8_table4[c & 0x3f]; /* Number of additional bytes */ \ - int gcss = 6*gcaa; \ - c = (c & utf8_table3[gcaa]) << gcss; \ - while (gcaa-- > 0) \ - { \ - gcss -= 6; \ - c |= (*eptr++ & 0x3f) << gcss; \ - } \ - } - -/* Get the next character, testing for UTF-8 mode, and advancing the pointer */ - -#define GETCHARINCTEST(c, eptr) \ - c = *eptr++; \ - if (md->utf8 && (c & 0xc0) == 0xc0) \ - { \ - int gcaa = utf8_table4[c & 0x3f]; /* Number of additional bytes */ \ - int gcss = 6*gcaa; \ - c = (c & utf8_table3[gcaa]) << gcss; \ - while (gcaa-- > 0) \ - { \ - gcss -= 6; \ - c |= (*eptr++ & 0x3f) << gcss; \ - } \ - } - -/* Get the next UTF-8 character, not advancing the pointer, incrementing length -if there are extra bytes. This is called when we know we are in UTF-8 mode. */ - -#define GETCHARLEN(c, eptr, len) \ - c = *eptr; \ - if ((c & 0xc0) == 0xc0) \ - { \ - int gcii; \ - int gcaa = utf8_table4[c & 0x3f]; /* Number of additional bytes */ \ - int gcss = 6*gcaa; \ - c = (c & utf8_table3[gcaa]) << gcss; \ - for (gcii = 1; gcii <= gcaa; gcii++) \ - { \ - gcss -= 6; \ - c |= (eptr[gcii] & 0x3f) << gcss; \ - } \ - len += gcaa; \ - } - -/* If the pointer is not at the start of a character, move it back until -it is. Called only in UTF-8 mode. */ - -#define BACKCHAR(eptr) while((*eptr & 0xc0) == 0x80) eptr--; - -#endif - - - -/************************************************* -* Default character tables * -*************************************************/ - -/* A default set of character tables is included in the PCRE binary. Its source -is built by the maketables auxiliary program, which uses the default C ctypes -functions, and put in the file chartables.c. These tables are used by PCRE -whenever the caller of pcre_compile() does not provide an alternate set of -tables. */ - -#include "chartables.c" - - - -#ifdef SUPPORT_UTF8 -/************************************************* -* Tables for UTF-8 support * -*************************************************/ - -/* These are the breakpoints for different numbers of bytes in a UTF-8 -character. */ - -static const int utf8_table1[] = - { 0x7f, 0x7ff, 0xffff, 0x1fffff, 0x3ffffff, 0x7fffffff}; - -/* These are the indicator bits and the mask for the data bits to set in the -first byte of a character, indexed by the number of additional bytes. */ - -static const int utf8_table2[] = { 0, 0xc0, 0xe0, 0xf0, 0xf8, 0xfc}; -static const int utf8_table3[] = { 0xff, 0x1f, 0x0f, 0x07, 0x03, 0x01}; - -/* Table of the number of extra characters, indexed by the first character -masked with 0x3f. The highest number for a valid UTF-8 character is in fact -0x3d. */ - -static const uschar utf8_table4[] = { - 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, - 1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1, - 2,2,2,2,2,2,2,2,2,2,2,2,2,2,2,2, - 3,3,3,3,3,3,3,3,4,4,4,4,5,5,5,5 }; - - -/************************************************* -* Convert character value to UTF-8 * -*************************************************/ - -/* This function takes an integer value in the range 0 - 0x7fffffff -and encodes it as a UTF-8 character in 0 to 6 bytes. - -Arguments: - cvalue the character value - buffer pointer to buffer for result - at least 6 bytes long - -Returns: number of characters placed in the buffer -*/ - -static int -ord2utf8(int cvalue, uschar *buffer) -{ -register int i, j; -for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++) - if (cvalue <= utf8_table1[i]) break; -buffer += i; -for (j = i; j > 0; j--) - { - *buffer-- = 0x80 | (cvalue & 0x3f); - cvalue >>= 6; - } -*buffer = utf8_table2[i] | cvalue; -return i + 1; -} -#endif - - - -/************************************************* -* Print compiled regex * -*************************************************/ - -/* The code for doing this is held in a separate file that is also included in -pcretest.c. It defines a function called print_internals(). */ - -#ifdef DEBUG -#include "printint.c" -#endif - - - -/************************************************* -* Return version string * -*************************************************/ - -#define STRING(a) # a -#define XSTRING(s) STRING(s) - -EXPORT const char * -pcre_version(void) -{ -return XSTRING(PCRE_MAJOR) "." XSTRING(PCRE_MINOR) " " XSTRING(PCRE_DATE); -} - - - - -/************************************************* -* (Obsolete) Return info about compiled pattern * -*************************************************/ - -/* This is the original "info" function. It picks potentially useful data out -of the private structure, but its interface was too rigid. It remains for -backwards compatibility. The public options are passed back in an int - though -the re->options field has been expanded to a long int, all the public options -at the low end of it, and so even on 16-bit systems this will still be OK. -Therefore, I haven't changed the API for pcre_info(). - -Arguments: - external_re points to compiled code - optptr where to pass back the options - first_byte where to pass back the first character, - or -1 if multiline and all branches start ^, - or -2 otherwise - -Returns: number of capturing subpatterns - or negative values on error -*/ - -EXPORT int -pcre_info(const pcre *external_re, int *optptr, int *first_byte) -{ -const real_pcre *re = (const real_pcre *)external_re; -if (re == NULL) return PCRE_ERROR_NULL; -if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC; -if (optptr != NULL) *optptr = (int)(re->options & PUBLIC_OPTIONS); -if (first_byte != NULL) - *first_byte = ((re->options & PCRE_FIRSTSET) != 0)? re->first_byte : - ((re->options & PCRE_STARTLINE) != 0)? -1 : -2; -return re->top_bracket; -} - - - -/************************************************* -* Return info about compiled pattern * -*************************************************/ - -/* This is a newer "info" function which has an extensible interface so -that additional items can be added compatibly. - -Arguments: - external_re points to compiled code - extra_data points extra data, or NULL - what what information is required - where where to put the information - -Returns: 0 if data returned, negative on error -*/ - -EXPORT int -pcre_fullinfo(const pcre *external_re, const pcre_extra *extra_data, int what, - void *where) -{ -const real_pcre *re = (const real_pcre *)external_re; -const pcre_study_data *study = NULL; - -if (re == NULL || where == NULL) return PCRE_ERROR_NULL; -if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC; - -if (extra_data != NULL && (extra_data->flags & PCRE_EXTRA_STUDY_DATA) != 0) - study = (const pcre_study_data *)extra_data->study_data; - -switch (what) - { - case PCRE_INFO_OPTIONS: - *((unsigned long int *)where) = re->options & PUBLIC_OPTIONS; - break; - - case PCRE_INFO_SIZE: - *((size_t *)where) = re->size; - break; - - case PCRE_INFO_STUDYSIZE: - *((size_t *)where) = (study == NULL)? 0 : study->size; - break; - - case PCRE_INFO_CAPTURECOUNT: - *((int *)where) = re->top_bracket; - break; - - case PCRE_INFO_BACKREFMAX: - *((int *)where) = re->top_backref; - break; - - case PCRE_INFO_FIRSTBYTE: - *((int *)where) = - ((re->options & PCRE_FIRSTSET) != 0)? re->first_byte : - ((re->options & PCRE_STARTLINE) != 0)? -1 : -2; - break; - - case PCRE_INFO_FIRSTTABLE: - *((const uschar **)where) = - (study != NULL && (study->options & PCRE_STUDY_MAPPED) != 0)? - study->start_bits : NULL; - break; - - case PCRE_INFO_LASTLITERAL: - *((int *)where) = - ((re->options & PCRE_REQCHSET) != 0)? re->req_byte : -1; - break; - - case PCRE_INFO_NAMEENTRYSIZE: - *((int *)where) = re->name_entry_size; - break; - - case PCRE_INFO_NAMECOUNT: - *((int *)where) = re->name_count; - break; - - case PCRE_INFO_NAMETABLE: - *((const uschar **)where) = (const uschar *)re + sizeof(real_pcre); - break; - - default: return PCRE_ERROR_BADOPTION; - } - -return 0; -} - - - -/************************************************* -* Return info about what features are configured * -*************************************************/ - -/* This is function which has an extensible interface so that additional items -can be added compatibly. - -Arguments: - what what information is required - where where to put the information - -Returns: 0 if data returned, negative on error -*/ - -EXPORT int -pcre_config(int what, void *where) -{ -switch (what) - { - case PCRE_CONFIG_UTF8: -#ifdef SUPPORT_UTF8 - *((int *)where) = 1; -#else - *((int *)where) = 0; -#endif - break; - - case PCRE_CONFIG_NEWLINE: - *((int *)where) = NEWLINE; - break; - - case PCRE_CONFIG_LINK_SIZE: - *((int *)where) = LINK_SIZE; - break; - - case PCRE_CONFIG_POSIX_MALLOC_THRESHOLD: - *((int *)where) = POSIX_MALLOC_THRESHOLD; - break; - - case PCRE_CONFIG_MATCH_LIMIT: - *((unsigned int *)where) = MATCH_LIMIT; - break; - - case PCRE_CONFIG_STACKRECURSE: -#ifdef NO_RECURSE - *((int *)where) = 0; -#else - *((int *)where) = 1; -#endif - break; - - default: return PCRE_ERROR_BADOPTION; - } - -return 0; -} - - - -#ifdef DEBUG -/************************************************* -* Debugging function to print chars * -*************************************************/ - -/* Print a sequence of chars in printable format, stopping at the end of the -subject if the requested. - -Arguments: - p points to characters - length number to print - is_subject TRUE if printing from within md->start_subject - md pointer to matching data block, if is_subject is TRUE - -Returns: nothing -*/ - -static void -pchars(const uschar *p, int length, BOOL is_subject, match_data *md) -{ -int c; -if (is_subject && length > md->end_subject - p) length = md->end_subject - p; -while (length-- > 0) - if (isprint(c = *(p++))) printf("%c", c); else printf("\\x%02x", c); -} -#endif - - - - -/************************************************* -* Handle escapes * -*************************************************/ - -/* This function is called when a \ has been encountered. It either returns a -positive value for a simple escape such as \n, or a negative value which -encodes one of the more complicated things such as \d. When UTF-8 is enabled, -a positive value greater than 255 may be returned. On entry, ptr is pointing at -the \. On exit, it is on the final character of the escape sequence. - -Arguments: - ptrptr points to the pattern position pointer - errorptr points to the pointer to the error message - bracount number of previous extracting brackets - options the options bits - isclass TRUE if inside a character class - -Returns: zero or positive => a data character - negative => a special escape sequence - on error, errorptr is set -*/ - -static int -check_escape(const uschar **ptrptr, const char **errorptr, int bracount, - int options, BOOL isclass) -{ -const uschar *ptr = *ptrptr; -int c, i; - -/* If backslash is at the end of the pattern, it's an error. */ - -c = *(++ptr); -if (c == 0) *errorptr = ERR1; - -/* Non-alphamerics are literals. For digits or letters, do an initial lookup in -a table. A non-zero result is something that can be returned immediately. -Otherwise further processing may be required. */ - -#if !EBCDIC /* ASCII coding */ -else if (c < '0' || c > 'z') {} /* Not alphameric */ -else if ((i = escapes[c - '0']) != 0) c = i; - -#else /* EBCDIC coding */ -else if (c < 'a' || (ebcdic_chartab[c] & 0x0E) == 0) {} /* Not alphameric */ -else if ((i = escapes[c - 0x48]) != 0) c = i; -#endif - -/* Escapes that need further processing, or are illegal. */ - -else - { - const uschar *oldptr; - switch (c) - { - /* A number of Perl escapes are not handled by PCRE. We give an explicit - error. */ - - case 'l': - case 'L': - case 'N': - case 'p': - case 'P': - case 'u': - case 'U': - case 'X': - *errorptr = ERR37; - break; - - /* The handling of escape sequences consisting of a string of digits - starting with one that is not zero is not straightforward. By experiment, - the way Perl works seems to be as follows: - - Outside a character class, the digits are read as a decimal number. If the - number is less than 10, or if there are that many previous extracting - left brackets, then it is a back reference. Otherwise, up to three octal - digits are read to form an escaped byte. Thus \123 is likely to be octal - 123 (cf \0123, which is octal 012 followed by the literal 3). If the octal - value is greater than 377, the least significant 8 bits are taken. Inside a - character class, \ followed by a digit is always an octal number. */ - - case '1': case '2': case '3': case '4': case '5': - case '6': case '7': case '8': case '9': - - if (!isclass) - { - oldptr = ptr; - c -= '0'; - while ((digitab[ptr[1]] & ctype_digit) != 0) - c = c * 10 + *(++ptr) - '0'; - if (c < 10 || c <= bracount) - { - c = -(ESC_REF + c); - break; - } - ptr = oldptr; /* Put the pointer back and fall through */ - } - - /* Handle an octal number following \. If the first digit is 8 or 9, Perl - generates a binary zero byte and treats the digit as a following literal. - Thus we have to pull back the pointer by one. */ - - if ((c = *ptr) >= '8') - { - ptr--; - c = 0; - break; - } - - /* \0 always starts an octal number, but we may drop through to here with a - larger first octal digit. */ - - case '0': - c -= '0'; - while(i++ < 2 && ptr[1] >= '0' && ptr[1] <= '7') - c = c * 8 + *(++ptr) - '0'; - c &= 255; /* Take least significant 8 bits */ - break; - - /* \x is complicated when UTF-8 is enabled. \x{ddd} is a character number - which can be greater than 0xff, but only if the ddd are hex digits. */ - - case 'x': -#ifdef SUPPORT_UTF8 - if (ptr[1] == '{' && (options & PCRE_UTF8) != 0) - { - const uschar *pt = ptr + 2; - register int count = 0; - c = 0; - while ((digitab[*pt] & ctype_xdigit) != 0) - { - int cc = *pt++; - count++; -#if !EBCDIC /* ASCII coding */ - if (cc >= 'a') cc -= 32; /* Convert to upper case */ - c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10)); -#else /* EBCDIC coding */ - if (cc >= 'a' && cc <= 'z') cc += 64; /* Convert to upper case */ - c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10)); -#endif - } - if (*pt == '}') - { - if (c < 0 || count > 8) *errorptr = ERR34; - ptr = pt; - break; - } - /* If the sequence of hex digits does not end with '}', then we don't - recognize this construct; fall through to the normal \x handling. */ - } -#endif - - /* Read just a single hex char */ - - c = 0; - while (i++ < 2 && (digitab[ptr[1]] & ctype_xdigit) != 0) - { - int cc; /* Some compilers don't like ++ */ - cc = *(++ptr); /* in initializers */ -#if !EBCDIC /* ASCII coding */ - if (cc >= 'a') cc -= 32; /* Convert to upper case */ - c = c * 16 + cc - ((cc < 'A')? '0' : ('A' - 10)); -#else /* EBCDIC coding */ - if (cc <= 'z') cc += 64; /* Convert to upper case */ - c = c * 16 + cc - ((cc >= '0')? '0' : ('A' - 10)); -#endif - } - break; - - /* Other special escapes not starting with a digit are straightforward */ - - case 'c': - c = *(++ptr); - if (c == 0) - { - *errorptr = ERR2; - return 0; - } - - /* A letter is upper-cased; then the 0x40 bit is flipped. This coding - is ASCII-specific, but then the whole concept of \cx is ASCII-specific. - (However, an EBCDIC equivalent has now been added.) */ - -#if !EBCDIC /* ASCII coding */ - if (c >= 'a' && c <= 'z') c -= 32; - c ^= 0x40; -#else /* EBCDIC coding */ - if (c >= 'a' && c <= 'z') c += 64; - c ^= 0xC0; -#endif - break; - - /* PCRE_EXTRA enables extensions to Perl in the matter of escapes. Any - other alphameric following \ is an error if PCRE_EXTRA was set; otherwise, - for Perl compatibility, it is a literal. This code looks a bit odd, but - there used to be some cases other than the default, and there may be again - in future, so I haven't "optimized" it. */ - - default: - if ((options & PCRE_EXTRA) != 0) switch(c) - { - default: - *errorptr = ERR3; - break; - } - break; - } - } - -*ptrptr = ptr; -return c; -} - - - -/************************************************* -* Check for counted repeat * -*************************************************/ - -/* This function is called when a '{' is encountered in a place where it might -start a quantifier. It looks ahead to see if it really is a quantifier or not. -It is only a quantifier if it is one of the forms {ddd} {ddd,} or {ddd,ddd} -where the ddds are digits. - -Arguments: - p pointer to the first char after '{' - -Returns: TRUE or FALSE -*/ - -static BOOL -is_counted_repeat(const uschar *p) -{ -if ((digitab[*p++] & ctype_digit) == 0) return FALSE; -while ((digitab[*p] & ctype_digit) != 0) p++; -if (*p == '}') return TRUE; - -if (*p++ != ',') return FALSE; -if (*p == '}') return TRUE; - -if ((digitab[*p++] & ctype_digit) == 0) return FALSE; -while ((digitab[*p] & ctype_digit) != 0) p++; - -return (*p == '}'); -} - - - -/************************************************* -* Read repeat counts * -*************************************************/ - -/* Read an item of the form {n,m} and return the values. This is called only -after is_counted_repeat() has confirmed that a repeat-count quantifier exists, -so the syntax is guaranteed to be correct, but we need to check the values. - -Arguments: - p pointer to first char after '{' - minp pointer to int for min - maxp pointer to int for max - returned as -1 if no max - errorptr points to pointer to error message - -Returns: pointer to '}' on success; - current ptr on error, with errorptr set -*/ - -static const uschar * -read_repeat_counts(const uschar *p, int *minp, int *maxp, const char **errorptr) -{ -int min = 0; -int max = -1; - -while ((digitab[*p] & ctype_digit) != 0) min = min * 10 + *p++ - '0'; - -if (*p == '}') max = min; else - { - if (*(++p) != '}') - { - max = 0; - while((digitab[*p] & ctype_digit) != 0) max = max * 10 + *p++ - '0'; - if (max < min) - { - *errorptr = ERR4; - return p; - } - } - } - -/* Do paranoid checks, then fill in the required variables, and pass back the -pointer to the terminating '}'. */ - -if (min > 65535 || max > 65535) - *errorptr = ERR5; -else - { - *minp = min; - *maxp = max; - } -return p; -} - - - -/************************************************* -* Find first significant op code * -*************************************************/ - -/* This is called by several functions that scan a compiled expression looking -for a fixed first character, or an anchoring op code etc. It skips over things -that do not influence this. For some calls, a change of option is important. - -Arguments: - code pointer to the start of the group - options pointer to external options - optbit the option bit whose changing is significant, or - zero if none are - -Returns: pointer to the first significant opcode -*/ - -static const uschar* -first_significant_code(const uschar *code, int *options, int optbit) -{ -for (;;) - { - switch ((int)*code) - { - case OP_OPT: - if (optbit > 0 && ((int)code[1] & optbit) != (*options & optbit)) - *options = (int)code[1]; - code += 2; - break; - - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - do code += GET(code, 1); while (*code == OP_ALT); - /* Fall through */ - - case OP_CALLOUT: - case OP_CREF: - case OP_BRANUMBER: - case OP_WORD_BOUNDARY: - case OP_NOT_WORD_BOUNDARY: - code += OP_lengths[*code]; - break; - - default: - return code; - } - } -/* Control never reaches here */ -} - - - - -/************************************************* -* Find the fixed length of a pattern * -*************************************************/ - -/* Scan a pattern and compute the fixed length of subject that will match it, -if the length is fixed. This is needed for dealing with backward assertions. -In UTF8 mode, the result is in characters rather than bytes. - -Arguments: - code points to the start of the pattern (the bracket) - options the compiling options - -Returns: the fixed length, or -1 if there is no fixed length, - or -2 if \C was encountered -*/ - -static int -find_fixedlength(uschar *code, int options) -{ -int length = -1; - -register int branchlength = 0; -register uschar *cc = code + 1 + LINK_SIZE; - -/* Scan along the opcodes for this branch. If we get to the end of the -branch, check the length against that of the other branches. */ - -for (;;) - { - int d; - register int op = *cc; - if (op >= OP_BRA) op = OP_BRA; - - switch (op) - { - case OP_BRA: - case OP_ONCE: - case OP_COND: - d = find_fixedlength(cc, options); - if (d < 0) return d; - branchlength += d; - do cc += GET(cc, 1); while (*cc == OP_ALT); - cc += 1 + LINK_SIZE; - break; - - /* Reached end of a branch; if it's a ket it is the end of a nested - call. If it's ALT it is an alternation in a nested call. If it is - END it's the end of the outer call. All can be handled by the same code. */ - - case OP_ALT: - case OP_KET: - case OP_KETRMAX: - case OP_KETRMIN: - case OP_END: - if (length < 0) length = branchlength; - else if (length != branchlength) return -1; - if (*cc != OP_ALT) return length; - cc += 1 + LINK_SIZE; - branchlength = 0; - break; - - /* Skip over assertive subpatterns */ - - case OP_ASSERT: - case OP_ASSERT_NOT: - case OP_ASSERTBACK: - case OP_ASSERTBACK_NOT: - do cc += GET(cc, 1); while (*cc == OP_ALT); - /* Fall through */ - - /* Skip over things that don't match chars */ - - case OP_REVERSE: - case OP_BRANUMBER: - case OP_CREF: - case OP_OPT: - case OP_CALLOUT: - case OP_SOD: - case OP_SOM: - case OP_EOD: - case OP_EODN: - case OP_CIRC: - case OP_DOLL: - case OP_NOT_WORD_BOUNDARY: - case OP_WORD_BOUNDARY: - cc += OP_lengths[*cc]; - break; - - /* Handle char strings. In UTF-8 mode we must count characters, not bytes. - This requires a scan of the string, unfortunately. We assume valid UTF-8 - strings, so all we do is reduce the length by one for every byte whose bits - are 10xxxxxx. */ - - case OP_CHARS: - branchlength += *(++cc); -#ifdef SUPPORT_UTF8 - if ((options & PCRE_UTF8) != 0) - for (d = 1; d <= *cc; d++) - if ((cc[d] & 0xc0) == 0x80) branchlength--; -#endif - cc += *cc + 1; - break; - - /* Handle exact repetitions. The count is already in characters, but we - need to skip over a multibyte character in UTF8 mode. */ - - case OP_EXACT: - branchlength += GET2(cc,1); - cc += 4; -#ifdef SUPPORT_UTF8 - if ((options & PCRE_UTF8) != 0) - { - while((*cc & 0x80) == 0x80) cc++; - } -#endif - break; - - case OP_TYPEEXACT: - branchlength += GET2(cc,1); - cc += 4; - break; - - /* Handle single-char matchers */ - - case OP_NOT_DIGIT: - case OP_DIGIT: - case OP_NOT_WHITESPACE: - case OP_WHITESPACE: - case OP_NOT_WORDCHAR: - case OP_WORDCHAR: - case OP_ANY: - branchlength++; - cc++; - break; - - /* The single-byte matcher isn't allowed */ - - case OP_ANYBYTE: - return -2; - - /* Check a class for variable quantification */ - -#ifdef SUPPORT_UTF8 - case OP_XCLASS: - cc += GET(cc, 1) - 33; - /* Fall through */ -#endif - - case OP_CLASS: - case OP_NCLASS: - cc += 33; - - switch (*cc) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRQUERY: - case OP_CRMINQUERY: - return -1; - - case OP_CRRANGE: - case OP_CRMINRANGE: - if (GET2(cc,1) != GET2(cc,3)) return -1; - branchlength += GET2(cc,1); - cc += 5; - break; - - default: - branchlength++; - } - break; - - /* Anything else is variable length */ - - default: - return -1; - } - } -/* Control never gets here */ -} - - - - -/************************************************* -* Scan compiled regex for numbered bracket * -*************************************************/ - -/* This little function scans through a compiled pattern until it finds a -capturing bracket with the given number. - -Arguments: - code points to start of expression - utf8 TRUE in UTF-8 mode - number the required bracket number - -Returns: pointer to the opcode for the bracket, or NULL if not found -*/ - -static const uschar * -find_bracket(const uschar *code, BOOL utf8, int number) -{ -#ifndef SUPPORT_UTF8 -utf8 = utf8; /* Stop pedantic compilers complaining */ -#endif - -for (;;) - { - register int c = *code; - if (c == OP_END) return NULL; - else if (c == OP_CHARS) code += code[1] + OP_lengths[c]; - else if (c > OP_BRA) - { - int n = c - OP_BRA; - if (n > EXTRACT_BASIC_MAX) n = GET2(code, 2+LINK_SIZE); - if (n == number) return (uschar *)code; - code += OP_lengths[OP_BRA]; - } - else - { - code += OP_lengths[c]; - -#ifdef SUPPORT_UTF8 - - /* In UTF-8 mode, opcodes that are followed by a character may be followed - by a multi-byte character. The length in the table is a minimum, so we have - to scan along to skip the extra characters. All opcodes are less than 128, - so we can use relatively efficient code. */ - - if (utf8) switch(c) - { - case OP_EXACT: - case OP_UPTO: - case OP_MINUPTO: - case OP_STAR: - case OP_MINSTAR: - case OP_PLUS: - case OP_MINPLUS: - case OP_QUERY: - case OP_MINQUERY: - while ((*code & 0xc0) == 0x80) code++; - break; - - /* XCLASS is used for classes that cannot be represented just by a bit - map. This includes negated single high-valued characters. The length in - the table is zero; the actual length is stored in the compled code. */ - - case OP_XCLASS: - code += GET(code, 1) + 1; - break; - } -#endif - } - } -} - - - -/************************************************* -* Scan compiled regex for recursion reference * -*************************************************/ - -/* This little function scans through a compiled pattern until it finds an -instance of OP_RECURSE. - -Arguments: - code points to start of expression - utf8 TRUE in UTF-8 mode - -Returns: pointer to the opcode for OP_RECURSE, or NULL if not found -*/ - -static const uschar * -find_recurse(const uschar *code, BOOL utf8) -{ -#ifndef SUPPORT_UTF8 -utf8 = utf8; /* Stop pedantic compilers complaining */ -#endif - -for (;;) - { - register int c = *code; - if (c == OP_END) return NULL; - else if (c == OP_RECURSE) return code; - else if (c == OP_CHARS) code += code[1] + OP_lengths[c]; - else if (c > OP_BRA) - { - code += OP_lengths[OP_BRA]; - } - else - { - code += OP_lengths[c]; - -#ifdef SUPPORT_UTF8 - - /* In UTF-8 mode, opcodes that are followed by a character may be followed - by a multi-byte character. The length in the table is a minimum, so we have - to scan along to skip the extra characters. All opcodes are less than 128, - so we can use relatively efficient code. */ - - if (utf8) switch(c) - { - case OP_EXACT: - case OP_UPTO: - case OP_MINUPTO: - case OP_STAR: - case OP_MINSTAR: - case OP_PLUS: - case OP_MINPLUS: - case OP_QUERY: - case OP_MINQUERY: - while ((*code & 0xc0) == 0x80) code++; - break; - - /* XCLASS is used for classes that cannot be represented just by a bit - map. This includes negated single high-valued characters. The length in - the table is zero; the actual length is stored in the compled code. */ - - case OP_XCLASS: - code += GET(code, 1) + 1; - break; - } -#endif - } - } -} - - - -/************************************************* -* Scan compiled branch for non-emptiness * -*************************************************/ - -/* This function scans through a branch of a compiled pattern to see whether it -can match the empty string or not. It is called only from could_be_empty() -below. Note that first_significant_code() skips over assertions. If we hit an -unclosed bracket, we return "empty" - this means we've struck an inner bracket -whose current branch will already have been scanned. - -Arguments: - code points to start of search - endcode points to where to stop - utf8 TRUE if in UTF8 mode - -Returns: TRUE if what is matched could be empty -*/ - -static BOOL -could_be_empty_branch(const uschar *code, const uschar *endcode, BOOL utf8) -{ -register int c; -for (code = first_significant_code(code + 1 + LINK_SIZE, NULL, 0); - code < endcode; - code = first_significant_code(code + OP_lengths[c], NULL, 0)) - { - const uschar *ccode; - - c = *code; - - if (c >= OP_BRA) - { - BOOL empty_branch; - if (GET(code, 1) == 0) return TRUE; /* Hit unclosed bracket */ - - /* Scan a closed bracket */ - - empty_branch = FALSE; - do - { - if (!empty_branch && could_be_empty_branch(code, endcode, utf8)) - empty_branch = TRUE; - code += GET(code, 1); - } - while (*code == OP_ALT); - if (!empty_branch) return FALSE; /* All branches are non-empty */ - code += 1 + LINK_SIZE; - c = *code; - } - - else switch (c) - { - /* Check for quantifiers after a class */ - -#ifdef SUPPORT_UTF8 - case OP_XCLASS: - ccode = code + GET(code, 1); - goto CHECK_CLASS_REPEAT; -#endif - - case OP_CLASS: - case OP_NCLASS: - ccode = code + 33; - -#ifdef SUPPORT_UTF8 - CHECK_CLASS_REPEAT: -#endif - - switch (*ccode) - { - case OP_CRSTAR: /* These could be empty; continue */ - case OP_CRMINSTAR: - case OP_CRQUERY: - case OP_CRMINQUERY: - break; - - default: /* Non-repeat => class must match */ - case OP_CRPLUS: /* These repeats aren't empty */ - case OP_CRMINPLUS: - return FALSE; - - case OP_CRRANGE: - case OP_CRMINRANGE: - if (GET2(ccode, 1) > 0) return FALSE; /* Minimum > 0 */ - break; - } - break; - - /* Opcodes that must match a character */ - - case OP_NOT_DIGIT: - case OP_DIGIT: - case OP_NOT_WHITESPACE: - case OP_WHITESPACE: - case OP_NOT_WORDCHAR: - case OP_WORDCHAR: - case OP_ANY: - case OP_ANYBYTE: - case OP_CHARS: - case OP_NOT: - case OP_PLUS: - case OP_MINPLUS: - case OP_EXACT: - case OP_NOTPLUS: - case OP_NOTMINPLUS: - case OP_NOTEXACT: - case OP_TYPEPLUS: - case OP_TYPEMINPLUS: - case OP_TYPEEXACT: - return FALSE; - - /* End of branch */ - - case OP_KET: - case OP_KETRMAX: - case OP_KETRMIN: - case OP_ALT: - return TRUE; - - /* In UTF-8 mode, STAR, MINSTAR, QUERY, MINQUERY, UPTO, and MINUPTO may be - followed by a multibyte character */ - -#ifdef SUPPORT_UTF8 - case OP_STAR: - case OP_MINSTAR: - case OP_QUERY: - case OP_MINQUERY: - case OP_UPTO: - case OP_MINUPTO: - if (utf8) while ((code[2] & 0xc0) == 0x80) code++; - break; -#endif - } - } - -return TRUE; -} - - - -/************************************************* -* Scan compiled regex for non-emptiness * -*************************************************/ - -/* This function is called to check for left recursive calls. We want to check -the current branch of the current pattern to see if it could match the empty -string. If it could, we must look outwards for branches at other levels, -stopping when we pass beyond the bracket which is the subject of the recursion. - -Arguments: - code points to start of the recursion - endcode points to where to stop (current RECURSE item) - bcptr points to the chain of current (unclosed) branch starts - utf8 TRUE if in UTF-8 mode - -Returns: TRUE if what is matched could be empty -*/ - -static BOOL -could_be_empty(const uschar *code, const uschar *endcode, branch_chain *bcptr, - BOOL utf8) -{ -while (bcptr != NULL && bcptr->current >= code) - { - if (!could_be_empty_branch(bcptr->current, endcode, utf8)) return FALSE; - bcptr = bcptr->outer; - } -return TRUE; -} - - - -/************************************************* -* Check for POSIX class syntax * -*************************************************/ - -/* This function is called when the sequence "[:" or "[." or "[=" is -encountered in a character class. It checks whether this is followed by an -optional ^ and then a sequence of letters, terminated by a matching ":]" or -".]" or "=]". - -Argument: - ptr pointer to the initial [ - endptr where to return the end pointer - cd pointer to compile data - -Returns: TRUE or FALSE -*/ - -static BOOL -check_posix_syntax(const uschar *ptr, const uschar **endptr, compile_data *cd) -{ -int terminator; /* Don't combine these lines; the Solaris cc */ -terminator = *(++ptr); /* compiler warns about "non-constant" initializer. */ -if (*(++ptr) == '^') ptr++; -while ((cd->ctypes[*ptr] & ctype_letter) != 0) ptr++; -if (*ptr == terminator && ptr[1] == ']') - { - *endptr = ptr; - return TRUE; - } -return FALSE; -} - - - - -/************************************************* -* Check POSIX class name * -*************************************************/ - -/* This function is called to check the name given in a POSIX-style class entry -such as [:alnum:]. - -Arguments: - ptr points to the first letter - len the length of the name - -Returns: a value representing the name, or -1 if unknown -*/ - -static int -check_posix_name(const uschar *ptr, int len) -{ -register int yield = 0; -while (posix_name_lengths[yield] != 0) - { - if (len == posix_name_lengths[yield] && - strncmp((const char *)ptr, posix_names[yield], len) == 0) return yield; - yield++; - } -return -1; -} - - -/************************************************* -* Adjust OP_RECURSE items in repeated group * -*************************************************/ - -/* OP_RECURSE items contain an offset from the start of the regex to the group -that is referenced. This means that groups can be replicated for fixed -repetition simply by copying (because the recursion is allowed to refer to -earlier groups that are outside the current group). However, when a group is -optional (i.e. the minimum quantifier is zero), OP_BRAZERO is inserted before -it, after it has been compiled. This means that any OP_RECURSE items within it -that refer to the group itself or any contained groups have to have their -offsets adjusted. That is the job of this function. Before it is called, the -partially compiled regex must be temporarily terminated with OP_END. - -Arguments: - group points to the start of the group - adjust the amount by which the group is to be moved - utf8 TRUE in UTF-8 mode - cd contains pointers to tables etc. - -Returns: nothing -*/ - -static void -adjust_recurse(uschar *group, int adjust, BOOL utf8, compile_data *cd) -{ -uschar *ptr = group; -while ((ptr = (uschar *)find_recurse(ptr, utf8)) != NULL) - { - int offset = GET(ptr, 1); - if (cd->start_code + offset >= group) PUT(ptr, 1, offset + adjust); - ptr += 1 + LINK_SIZE; - } -} - - - -/************************************************* -* Compile one branch * -*************************************************/ - -/* Scan the pattern, compiling it into the code vector. If the options are -changed during the branch, the pointer is used to change the external options -bits. - -Arguments: - optionsptr pointer to the option bits - brackets points to number of extracting brackets used - code points to the pointer to the current code point - ptrptr points to the current pattern pointer - errorptr points to pointer to error message - firstbyteptr set to initial literal character, or < 0 (REQ_UNSET, REQ_NONE) - reqbyteptr set to the last literal character required, else < 0 - bcptr points to current branch chain - cd contains pointers to tables etc. - -Returns: TRUE on success - FALSE, with *errorptr set on error -*/ - -static BOOL -compile_branch(int *optionsptr, int *brackets, uschar **codeptr, - const uschar **ptrptr, const char **errorptr, int *firstbyteptr, - int *reqbyteptr, branch_chain *bcptr, compile_data *cd) -{ -int repeat_type, op_type; -int repeat_min = 0, repeat_max = 0; /* To please picky compilers */ -int bravalue = 0; -int length; -int greedy_default, greedy_non_default; -int firstbyte, reqbyte; -int zeroreqbyte, zerofirstbyte; -int req_caseopt, reqvary, tempreqvary; -int condcount = 0; -int options = *optionsptr; -register int c; -register uschar *code = *codeptr; -uschar *tempcode; -BOOL inescq = FALSE; -BOOL groupsetfirstbyte = FALSE; -const uschar *ptr = *ptrptr; -const uschar *tempptr; -uschar *previous = NULL; -uschar class[32]; - -#ifdef SUPPORT_UTF8 -BOOL class_utf8; -BOOL utf8 = (options & PCRE_UTF8) != 0; -uschar *class_utf8data; -uschar utf8_char[6]; -#else -BOOL utf8 = FALSE; -#endif - -/* Set up the default and non-default settings for greediness */ - -greedy_default = ((options & PCRE_UNGREEDY) != 0); -greedy_non_default = greedy_default ^ 1; - -/* Initialize no first char, no required char. REQ_UNSET means "no char -matching encountered yet". It gets changed to REQ_NONE if we hit something that -matches a non-fixed char first char; reqbyte just remains unset if we never -find one. - -When we hit a repeat whose minimum is zero, we may have to adjust these values -to take the zero repeat into account. This is implemented by setting them to -zerofirstbyte and zeroreqbyte when such a repeat is encountered. The individual -item types that can be repeated set these backoff variables appropriately. */ - -firstbyte = reqbyte = zerofirstbyte = zeroreqbyte = REQ_UNSET; - -/* The variable req_caseopt contains either the REQ_CASELESS value or zero, -according to the current setting of the caseless flag. REQ_CASELESS is a bit -value > 255. It is added into the firstbyte or reqbyte variables to record the -case status of the value. */ - -req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS : 0; - -/* Switch on next character until the end of the branch */ - -for (;; ptr++) - { - BOOL negate_class; - BOOL possessive_quantifier; - int class_charcount; - int class_lastchar; - int newoptions; - int recno; - int skipbytes; - int subreqbyte; - int subfirstbyte; - - c = *ptr; - if (inescq && c != 0) goto NORMAL_CHAR; - - if ((options & PCRE_EXTENDED) != 0) - { - if ((cd->ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != NEWLINE) ; - if (c != 0) continue; /* Else fall through to handle end of string */ - } - } - - switch(c) - { - /* The branch terminates at end of string, |, or ). */ - - case 0: - case '|': - case ')': - *firstbyteptr = firstbyte; - *reqbyteptr = reqbyte; - *codeptr = code; - *ptrptr = ptr; - return TRUE; - - /* Handle single-character metacharacters. In multiline mode, ^ disables - the setting of any following char as a first character. */ - - case '^': - if ((options & PCRE_MULTILINE) != 0) - { - if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE; - } - previous = NULL; - *code++ = OP_CIRC; - break; - - case '$': - previous = NULL; - *code++ = OP_DOLL; - break; - - /* There can never be a first char if '.' is first, whatever happens about - repeats. The value of reqbyte doesn't change either. */ - - case '.': - if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE; - zerofirstbyte = firstbyte; - zeroreqbyte = reqbyte; - previous = code; - *code++ = OP_ANY; - break; - - /* Character classes. If the included characters are all < 255 in value, we - build a 32-byte bitmap of the permitted characters, except in the special - case where there is only one such character. For negated classes, we build - the map as usual, then invert it at the end. However, we use a different - opcode so that data characters > 255 can be handled correctly. - - If the class contains characters outside the 0-255 range, a different - opcode is compiled. It may optionally have a bit map for characters < 256, - but those above are are explicitly listed afterwards. A flag byte tells - whether the bitmap is present, and whether this is a negated class or not. - */ - - case '[': - previous = code; - - /* PCRE supports POSIX class stuff inside a class. Perl gives an error if - they are encountered at the top level, so we'll do that too. */ - - if ((ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') && - check_posix_syntax(ptr, &tempptr, cd)) - { - *errorptr = (ptr[1] == ':')? ERR13 : ERR31; - goto FAILED; - } - - /* If the first character is '^', set the negation flag and skip it. */ - - if ((c = *(++ptr)) == '^') - { - negate_class = TRUE; - c = *(++ptr); - } - else - { - negate_class = FALSE; - } - - /* Keep a count of chars with values < 256 so that we can optimize the case - of just a single character (as long as it's < 256). For higher valued UTF-8 - characters, we don't yet do any optimization. */ - - class_charcount = 0; - class_lastchar = -1; - -#ifdef SUPPORT_UTF8 - class_utf8 = FALSE; /* No chars >= 256 */ - class_utf8data = code + LINK_SIZE + 34; /* For UTF-8 items */ -#endif - - /* Initialize the 32-char bit map to all zeros. We have to build the - map in a temporary bit of store, in case the class contains only 1 - character (< 256), because in that case the compiled code doesn't use the - bit map. */ - - memset(class, 0, 32 * sizeof(uschar)); - - /* Process characters until ] is reached. By writing this as a "do" it - means that an initial ] is taken as a data character. The first pass - through the regex checked the overall syntax, so we don't need to be very - strict here. At the start of the loop, c contains the first byte of the - character. */ - - do - { -#ifdef SUPPORT_UTF8 - if (utf8 && c > 127) - { /* Braces are required because the */ - GETCHARLEN(c, ptr, ptr); /* macro generates multiple statements */ - } -#endif - - /* Inside \Q...\E everything is literal except \E */ - - if (inescq) - { - if (c == '\\' && ptr[1] == 'E') - { - inescq = FALSE; - ptr++; - continue; - } - else goto LONE_SINGLE_CHARACTER; - } - - /* Handle POSIX class names. Perl allows a negation extension of the - form [:^name:]. A square bracket that doesn't match the syntax is - treated as a literal. We also recognize the POSIX constructions - [.ch.] and [=ch=] ("collating elements") and fault them, as Perl - 5.6 and 5.8 do. */ - - if (c == '[' && - (ptr[1] == ':' || ptr[1] == '.' || ptr[1] == '=') && - check_posix_syntax(ptr, &tempptr, cd)) - { - BOOL local_negate = FALSE; - int posix_class, i; - register const uschar *cbits = cd->cbits; - - if (ptr[1] != ':') - { - *errorptr = ERR31; - goto FAILED; - } - - ptr += 2; - if (*ptr == '^') - { - local_negate = TRUE; - ptr++; - } - - posix_class = check_posix_name(ptr, tempptr - ptr); - if (posix_class < 0) - { - *errorptr = ERR30; - goto FAILED; - } - - /* If matching is caseless, upper and lower are converted to - alpha. This relies on the fact that the class table starts with - alpha, lower, upper as the first 3 entries. */ - - if ((options & PCRE_CASELESS) != 0 && posix_class <= 2) - posix_class = 0; - - /* Or into the map we are building up to 3 of the static class - tables, or their negations. The [:blank:] class sets up the same - chars as the [:space:] class (all white space). We remove the vertical - white space chars afterwards. */ - - posix_class *= 3; - for (i = 0; i < 3; i++) - { - BOOL blankclass = strncmp((char *)ptr, "blank", 5) == 0; - int taboffset = posix_class_maps[posix_class + i]; - if (taboffset < 0) break; - if (local_negate) - { - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+taboffset]; - if (blankclass) class[1] |= 0x3c; - } - else - { - for (c = 0; c < 32; c++) class[c] |= cbits[c+taboffset]; - if (blankclass) class[1] &= ~0x3c; - } - } - - ptr = tempptr + 1; - class_charcount = 10; /* Set > 1; assumes more than 1 per class */ - continue; /* End of POSIX syntax handling */ - } - - /* Backslash may introduce a single character, or it may introduce one - of the specials, which just set a flag. Escaped items are checked for - validity in the pre-compiling pass. The sequence \b is a special case. - Inside a class (and only there) it is treated as backspace. Elsewhere - it marks a word boundary. Other escapes have preset maps ready to - or into the one we are building. We assume they have more than one - character in them, so set class_charcount bigger than one. */ - - if (c == '\\') - { - c = check_escape(&ptr, errorptr, *brackets, options, TRUE); - if (-c == ESC_b) c = '\b'; /* \b is backslash in a class */ - - if (-c == ESC_Q) /* Handle start of quoted string */ - { - if (ptr[1] == '\\' && ptr[2] == 'E') - { - ptr += 2; /* avoid empty string */ - } - else inescq = TRUE; - continue; - } - - else if (c < 0) - { - register const uschar *cbits = cd->cbits; - class_charcount = 10; /* Greater than 1 is what matters */ - switch (-c) - { - case ESC_d: - for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_digit]; - continue; - - case ESC_D: - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_digit]; - continue; - - case ESC_w: - for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_word]; - continue; - - case ESC_W: - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_word]; - continue; - - case ESC_s: - for (c = 0; c < 32; c++) class[c] |= cbits[c+cbit_space]; - class[1] &= ~0x08; /* Perl 5.004 onwards omits VT from \s */ - continue; - - case ESC_S: - for (c = 0; c < 32; c++) class[c] |= ~cbits[c+cbit_space]; - class[1] |= 0x08; /* Perl 5.004 onwards omits VT from \s */ - continue; - - /* Unrecognized escapes are faulted if PCRE is running in its - strict mode. By default, for compatibility with Perl, they are - treated as literals. */ - - default: - if ((options & PCRE_EXTRA) != 0) - { - *errorptr = ERR7; - goto FAILED; - } - c = *ptr; /* The final character */ - } - } - - /* Fall through if we have a single character (c >= 0). This may be - > 256 in UTF-8 mode. */ - - } /* End of backslash handling */ - - /* A single character may be followed by '-' to form a range. However, - Perl does not permit ']' to be the end of the range. A '-' character - here is treated as a literal. */ - - if (ptr[1] == '-' && ptr[2] != ']') - { - int d; - ptr += 2; - -#ifdef SUPPORT_UTF8 - if (utf8) - { /* Braces are required because the */ - GETCHARLEN(d, ptr, ptr); /* macro generates multiple statements */ - } - else -#endif - d = *ptr; - - /* The second part of a range can be a single-character escape, but - not any of the other escapes. Perl 5.6 treats a hyphen as a literal - in such circumstances. */ - - if (d == '\\') - { - const uschar *oldptr = ptr; - d = check_escape(&ptr, errorptr, *brackets, options, TRUE); - - /* \b is backslash; any other special means the '-' was literal */ - - if (d < 0) - { - if (d == -ESC_b) d = '\b'; else - { - ptr = oldptr - 2; - goto LONE_SINGLE_CHARACTER; /* A few lines below */ - } - } - } - - /* Check that the two values are in the correct order */ - - if (d < c) - { - *errorptr = ERR8; - goto FAILED; - } - - /* If d is greater than 255, we can't just use the bit map, so set up - for the UTF-8 supporting class type. If we are not caseless, we can - just set up a single range. If we are caseless, the characters < 256 - are handled with a bitmap, in order to get the case-insensitive - handling. */ - -#ifdef SUPPORT_UTF8 - if (d > 255) - { - class_utf8 = TRUE; - *class_utf8data++ = XCL_RANGE; - if ((options & PCRE_CASELESS) == 0) - { - class_utf8data += ord2utf8(c, class_utf8data); - class_utf8data += ord2utf8(d, class_utf8data); - continue; /* Go get the next char in the class */ - } - class_utf8data += ord2utf8(256, class_utf8data); - class_utf8data += ord2utf8(d, class_utf8data); - d = 255; - /* Fall through */ - } -#endif - /* We use the bit map if the range is entirely < 255, or if part of it - is < 255 and matching is caseless. */ - - for (; c <= d; c++) - { - class[c/8] |= (1 << (c&7)); - if ((options & PCRE_CASELESS) != 0) - { - int uc = cd->fcc[c]; /* flip case */ - class[uc/8] |= (1 << (uc&7)); - } - class_charcount++; /* in case a one-char range */ - class_lastchar = c; - } - - continue; /* Go get the next char in the class */ - } - - /* Handle a lone single character - we can get here for a normal - non-escape char, or after \ that introduces a single character. */ - - LONE_SINGLE_CHARACTER: - - /* Handle a multibyte character */ - -#ifdef SUPPORT_UTF8 - if (utf8 && c > 255) - { - class_utf8 = TRUE; - *class_utf8data++ = XCL_SINGLE; - class_utf8data += ord2utf8(c, class_utf8data); - } - else -#endif - /* Handle a single-byte character */ - { - class [c/8] |= (1 << (c&7)); - if ((options & PCRE_CASELESS) != 0) - { - c = cd->fcc[c]; /* flip case */ - class[c/8] |= (1 << (c&7)); - } - class_charcount++; - class_lastchar = c; - } - } - - /* Loop until ']' reached; the check for end of string happens inside the - loop. This "while" is the end of the "do" above. */ - - while ((c = *(++ptr)) != ']' || inescq); - - /* If class_charcount is 1, we saw precisely one character with a value < - 256. In UTF-8 mode, we can optimize if there were no characters >= 256 and - the one character is < 128. In non-UTF-8 mode we can always optimize. - - The optimization throws away the bit map. We turn the item into a - 1-character OP_CHARS if it's positive, or OP_NOT if it's negative. Note - that OP_NOT does not support multibyte characters. In the positive case, it - can cause firstbyte to be set. Otherwise, there can be no first char if - this item is first, whatever repeat count may follow. In the case of - reqbyte, save the previous value for reinstating. */ - -#ifdef SUPPORT_UTF8 - if (class_charcount == 1 && - (!utf8 || - (!class_utf8 && class_lastchar < 128))) -#else - if (class_charcount == 1) -#endif - { - zeroreqbyte = reqbyte; - if (negate_class) - { - if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE; - zerofirstbyte = firstbyte; - *code++ = OP_NOT; - } - else - { - if (firstbyte == REQ_UNSET) - { - zerofirstbyte = REQ_NONE; - firstbyte = class_lastchar | req_caseopt; - } - else - { - zerofirstbyte = firstbyte; - reqbyte = class_lastchar | req_caseopt | cd->req_varyopt; - } - *code++ = OP_CHARS; - *code++ = 1; - } - *code++ = class_lastchar; - break; /* End of class handling */ - } /* End of 1-byte optimization */ - - /* Otherwise, if this is the first thing in the branch, there can be no - first char setting, whatever the repeat count. Any reqbyte setting must - remain unchanged after any kind of repeat. */ - - if (firstbyte == REQ_UNSET) firstbyte = REQ_NONE; - zerofirstbyte = firstbyte; - zeroreqbyte = reqbyte; - - /* If there are characters with values > 255, we have to compile an - extended class, with its own opcode. If there are no characters < 256, - we can omit the bitmap. */ - -#ifdef SUPPORT_UTF8 - if (class_utf8) - { - *class_utf8data++ = XCL_END; /* Marks the end of extra data */ - *code++ = OP_XCLASS; - code += LINK_SIZE; - *code = negate_class? XCL_NOT : 0; - - /* If the map is required, install it, and move on to the end of - the extra data */ - - if (class_charcount > 0) - { - *code++ |= XCL_MAP; - memcpy(code, class, 32); - code = class_utf8data; - } - - /* If the map is not required, slide down the extra data. */ - - else - { - int len = class_utf8data - (code + 33); - memmove(code + 1, code + 33, len); - code += len + 1; - } - - /* Now fill in the complete length of the item */ - - PUT(previous, 1, code - previous); - break; /* End of class handling */ - } -#endif - - /* If there are no characters > 255, negate the 32-byte map if necessary, - and copy it into the code vector. If this is the first thing in the branch, - there can be no first char setting, whatever the repeat count. Any reqbyte - setting must remain unchanged after any kind of repeat. */ - - if (negate_class) - { - *code++ = OP_NCLASS; - for (c = 0; c < 32; c++) code[c] = ~class[c]; - } - else - { - *code++ = OP_CLASS; - memcpy(code, class, 32); - } - code += 32; - break; - - /* Various kinds of repeat */ - - case '{': - if (!is_counted_repeat(ptr+1)) goto NORMAL_CHAR; - ptr = read_repeat_counts(ptr+1, &repeat_min, &repeat_max, errorptr); - if (*errorptr != NULL) goto FAILED; - goto REPEAT; - - case '*': - repeat_min = 0; - repeat_max = -1; - goto REPEAT; - - case '+': - repeat_min = 1; - repeat_max = -1; - goto REPEAT; - - case '?': - repeat_min = 0; - repeat_max = 1; - - REPEAT: - if (previous == NULL) - { - *errorptr = ERR9; - goto FAILED; - } - - if (repeat_min == 0) - { - firstbyte = zerofirstbyte; /* Adjust for zero repeat */ - reqbyte = zeroreqbyte; /* Ditto */ - } - - /* Remember whether this is a variable length repeat */ - - reqvary = (repeat_min == repeat_max)? 0 : REQ_VARY; - - op_type = 0; /* Default single-char op codes */ - possessive_quantifier = FALSE; /* Default not possessive quantifier */ - - /* Save start of previous item, in case we have to move it up to make space - for an inserted OP_ONCE for the additional '+' extension. */ - - tempcode = previous; - - /* If the next character is '+', we have a possessive quantifier. This - implies greediness, whatever the setting of the PCRE_UNGREEDY option. - If the next character is '?' this is a minimizing repeat, by default, - but if PCRE_UNGREEDY is set, it works the other way round. We change the - repeat type to the non-default. */ - - if (ptr[1] == '+') - { - repeat_type = 0; /* Force greedy */ - possessive_quantifier = TRUE; - ptr++; - } - else if (ptr[1] == '?') - { - repeat_type = greedy_non_default; - ptr++; - } - else repeat_type = greedy_default; - - /* If previous was a recursion, we need to wrap it inside brackets so that - it can be replicated if necessary. */ - - if (*previous == OP_RECURSE) - { - memmove(previous + 1 + LINK_SIZE, previous, 1 + LINK_SIZE); - code += 1 + LINK_SIZE; - *previous = OP_BRA; - PUT(previous, 1, code - previous); - *code = OP_KET; - PUT(code, 1, code - previous); - code += 1 + LINK_SIZE; - } - - /* If previous was a string of characters, chop off the last one and use it - as the subject of the repeat. If there was only one character, we can - abolish the previous item altogether. If a one-char item has a minumum of - more than one, ensure that it is set in reqbyte - it might not be if a - sequence such as x{3} is the first thing in a branch because the x will - have gone into firstbyte instead. */ - - if (*previous == OP_CHARS) - { - /* Deal with UTF-8 characters that take up more than one byte. It's - easier to write this out separately than try to macrify it. Use c to - hold the length of the character in bytes, plus 0x80 to flag that it's a - length rather than a small character. */ - -#ifdef SUPPORT_UTF8 - if (utf8 && (code[-1] & 0x80) != 0) - { - uschar *lastchar = code - 1; - while((*lastchar & 0xc0) == 0x80) lastchar--; - c = code - lastchar; /* Length of UTF-8 character */ - memcpy(utf8_char, lastchar, c); /* Save the char */ - if (lastchar == previous + 2) /* There was only one character */ - { - code = previous; /* Abolish the previous item */ - } - else - { - previous[1] -= c; /* Adjust length of previous */ - code = lastchar; /* Lost char off the end */ - tempcode = code; /* Adjust position to be moved for '+' */ - } - c |= 0x80; /* Flag c as a length */ - } - else -#endif - - /* Handle the case of a single byte - either with no UTF8 support, or - with UTF-8 disabled, or for a UTF-8 character < 128. */ - - { - c = *(--code); - if (code == previous + 2) /* There was only one character */ - { - code = previous; /* Abolish the previous item */ - if (repeat_min > 1) reqbyte = c | req_caseopt | cd->req_varyopt; - } - else - { - previous[1]--; /* adjust length */ - tempcode = code; /* Adjust position to be moved for '+' */ - } - } - - goto OUTPUT_SINGLE_REPEAT; /* Code shared with single character types */ - } - - /* If previous was a single negated character ([^a] or similar), we use - one of the special opcodes, replacing it. The code is shared with single- - character repeats by setting opt_type to add a suitable offset into - repeat_type. OP_NOT is currently used only for single-byte chars. */ - - else if (*previous == OP_NOT) - { - op_type = OP_NOTSTAR - OP_STAR; /* Use "not" opcodes */ - c = previous[1]; - code = previous; - goto OUTPUT_SINGLE_REPEAT; - } - - /* If previous was a character type match (\d or similar), abolish it and - create a suitable repeat item. The code is shared with single-character - repeats by setting op_type to add a suitable offset into repeat_type. */ - - else if (*previous < OP_EODN) - { - op_type = OP_TYPESTAR - OP_STAR; /* Use type opcodes */ - c = *previous; - code = previous; - - OUTPUT_SINGLE_REPEAT: - - /* If the maximum is zero then the minimum must also be zero; Perl allows - this case, so we do too - by simply omitting the item altogether. */ - - if (repeat_max == 0) goto END_REPEAT; - - /* Combine the op_type with the repeat_type */ - - repeat_type += op_type; - - /* A minimum of zero is handled either as the special case * or ?, or as - an UPTO, with the maximum given. */ - - if (repeat_min == 0) - { - if (repeat_max == -1) *code++ = OP_STAR + repeat_type; - else if (repeat_max == 1) *code++ = OP_QUERY + repeat_type; - else - { - *code++ = OP_UPTO + repeat_type; - PUT2INC(code, 0, repeat_max); - } - } - - /* The case {1,} is handled as the special case + */ - - else if (repeat_min == 1 && repeat_max == -1) - *code++ = OP_PLUS + repeat_type; - - /* The case {n,n} is just an EXACT, while the general case {n,m} is - handled as an EXACT followed by an UPTO. An EXACT of 1 is optimized. */ - - else - { - if (repeat_min != 1) - { - *code++ = OP_EXACT + op_type; /* NB EXACT doesn't have repeat_type */ - PUT2INC(code, 0, repeat_min); - } - - /* If the mininum is 1 and the previous item was a character string, - we either have to put back the item that got cancelled if the string - length was 1, or add the character back onto the end of a longer - string. For a character type nothing need be done; it will just get - put back naturally. Note that the final character is always going to - get added below, so we leave code ready for its insertion. */ - - else if (*previous == OP_CHARS) - { - if (code == previous) code += 2; else - - /* In UTF-8 mode, a multibyte char has its length in c, with the 0x80 - bit set as a flag. The length will always be between 2 and 6. */ - -#ifdef SUPPORT_UTF8 - if (utf8 && c >= 128) previous[1] += c & 7; else -#endif - previous[1]++; - } - - /* For a single negated character we also have to put back the - item that got cancelled. At present this applies only to single byte - characters in any mode. */ - - else if (*previous == OP_NOT) code++; - - /* If the maximum is unlimited, insert an OP_STAR. Before doing so, - we have to insert the character for the previous code. In UTF-8 mode, - long characters have their length in c, with the 0x80 bit as a flag. */ - - if (repeat_max < 0) - { -#ifdef SUPPORT_UTF8 - if (utf8 && c >= 128) - { - memcpy(code, utf8_char, c & 7); - code += c & 7; - } - else -#endif - *code++ = c; - *code++ = OP_STAR + repeat_type; - } - - /* Else insert an UPTO if the max is greater than the min, again - preceded by the character, for the previously inserted code. */ - - else if (repeat_max != repeat_min) - { -#ifdef SUPPORT_UTF8 - if (utf8 && c >= 128) - { - memcpy(code, utf8_char, c & 7); - code += c & 7; - } - else -#endif - *code++ = c; - repeat_max -= repeat_min; - *code++ = OP_UPTO + repeat_type; - PUT2INC(code, 0, repeat_max); - } - } - - /* The character or character type itself comes last in all cases. */ - -#ifdef SUPPORT_UTF8 - if (utf8 && c >= 128) - { - memcpy(code, utf8_char, c & 7); - code += c & 7; - } - else -#endif - - *code++ = c; - } - - /* If previous was a character class or a back reference, we put the repeat - stuff after it, but just skip the item if the repeat was {0,0}. */ - - else if (*previous == OP_CLASS || - *previous == OP_NCLASS || -#ifdef SUPPORT_UTF8 - *previous == OP_XCLASS || -#endif - *previous == OP_REF) - { - if (repeat_max == 0) - { - code = previous; - goto END_REPEAT; - } - if (repeat_min == 0 && repeat_max == -1) - *code++ = OP_CRSTAR + repeat_type; - else if (repeat_min == 1 && repeat_max == -1) - *code++ = OP_CRPLUS + repeat_type; - else if (repeat_min == 0 && repeat_max == 1) - *code++ = OP_CRQUERY + repeat_type; - else - { - *code++ = OP_CRRANGE + repeat_type; - PUT2INC(code, 0, repeat_min); - if (repeat_max == -1) repeat_max = 0; /* 2-byte encoding for max */ - PUT2INC(code, 0, repeat_max); - } - } - - /* If previous was a bracket group, we may have to replicate it in certain - cases. */ - - else if (*previous >= OP_BRA || *previous == OP_ONCE || - *previous == OP_COND) - { - register int i; - int ketoffset = 0; - int len = code - previous; - uschar *bralink = NULL; - - /* If the maximum repeat count is unlimited, find the end of the bracket - by scanning through from the start, and compute the offset back to it - from the current code pointer. There may be an OP_OPT setting following - the final KET, so we can't find the end just by going back from the code - pointer. */ - - if (repeat_max == -1) - { - register uschar *ket = previous; - do ket += GET(ket, 1); while (*ket != OP_KET); - ketoffset = code - ket; - } - - /* The case of a zero minimum is special because of the need to stick - OP_BRAZERO in front of it, and because the group appears once in the - data, whereas in other cases it appears the minimum number of times. For - this reason, it is simplest to treat this case separately, as otherwise - the code gets far too messy. There are several special subcases when the - minimum is zero. */ - - if (repeat_min == 0) - { - /* If the maximum is also zero, we just omit the group from the output - altogether. */ - - if (repeat_max == 0) - { - code = previous; - goto END_REPEAT; - } - - /* If the maximum is 1 or unlimited, we just have to stick in the - BRAZERO and do no more at this point. However, we do need to adjust - any OP_RECURSE calls inside the group that refer to the group itself or - any internal group, because the offset is from the start of the whole - regex. Temporarily terminate the pattern while doing this. */ - - if (repeat_max <= 1) - { - *code = OP_END; - adjust_recurse(previous, 1, utf8, cd); - memmove(previous+1, previous, len); - code++; - *previous++ = OP_BRAZERO + repeat_type; - } - - /* If the maximum is greater than 1 and limited, we have to replicate - in a nested fashion, sticking OP_BRAZERO before each set of brackets. - The first one has to be handled carefully because it's the original - copy, which has to be moved up. The remainder can be handled by code - that is common with the non-zero minimum case below. We have to - adjust the value or repeat_max, since one less copy is required. Once - again, we may have to adjust any OP_RECURSE calls inside the group. */ - - else - { - int offset; - *code = OP_END; - adjust_recurse(previous, 2 + LINK_SIZE, utf8, cd); - memmove(previous + 2 + LINK_SIZE, previous, len); - code += 2 + LINK_SIZE; - *previous++ = OP_BRAZERO + repeat_type; - *previous++ = OP_BRA; - - /* We chain together the bracket offset fields that have to be - filled in later when the ends of the brackets are reached. */ - - offset = (bralink == NULL)? 0 : previous - bralink; - bralink = previous; - PUTINC(previous, 0, offset); - } - - repeat_max--; - } - - /* If the minimum is greater than zero, replicate the group as many - times as necessary, and adjust the maximum to the number of subsequent - copies that we need. If we set a first char from the group, and didn't - set a required char, copy the latter from the former. */ - - else - { - if (repeat_min > 1) - { - if (groupsetfirstbyte && reqbyte < 0) reqbyte = firstbyte; - for (i = 1; i < repeat_min; i++) - { - memcpy(code, previous, len); - code += len; - } - } - if (repeat_max > 0) repeat_max -= repeat_min; - } - - /* This code is common to both the zero and non-zero minimum cases. If - the maximum is limited, it replicates the group in a nested fashion, - remembering the bracket starts on a stack. In the case of a zero minimum, - the first one was set up above. In all cases the repeat_max now specifies - the number of additional copies needed. */ - - if (repeat_max >= 0) - { - for (i = repeat_max - 1; i >= 0; i--) - { - *code++ = OP_BRAZERO + repeat_type; - - /* All but the final copy start a new nesting, maintaining the - chain of brackets outstanding. */ - - if (i != 0) - { - int offset; - *code++ = OP_BRA; - offset = (bralink == NULL)? 0 : code - bralink; - bralink = code; - PUTINC(code, 0, offset); - } - - memcpy(code, previous, len); - code += len; - } - - /* Now chain through the pending brackets, and fill in their length - fields (which are holding the chain links pro tem). */ - - while (bralink != NULL) - { - int oldlinkoffset; - int offset = code - bralink + 1; - uschar *bra = code - offset; - oldlinkoffset = GET(bra, 1); - bralink = (oldlinkoffset == 0)? NULL : bralink - oldlinkoffset; - *code++ = OP_KET; - PUTINC(code, 0, offset); - PUT(bra, 1, offset); - } - } - - /* If the maximum is unlimited, set a repeater in the final copy. We - can't just offset backwards from the current code point, because we - don't know if there's been an options resetting after the ket. The - correct offset was computed above. */ - - else code[-ketoffset] = OP_KETRMAX + repeat_type; - } - - /* Else there's some kind of shambles */ - - else - { - *errorptr = ERR11; - goto FAILED; - } - - /* If the character following a repeat is '+', we wrap the entire repeated - item inside OP_ONCE brackets. This is just syntactic sugar, taken from - Sun's Java package. The repeated item starts at tempcode, not at previous, - which might be the first part of a string whose (former) last char we - repeated. However, we don't support '+' after a greediness '?'. */ - - if (possessive_quantifier) - { - int len = code - tempcode; - memmove(tempcode + 1+LINK_SIZE, tempcode, len); - code += 1 + LINK_SIZE; - len += 1 + LINK_SIZE; - tempcode[0] = OP_ONCE; - *code++ = OP_KET; - PUTINC(code, 0, len); - PUT(tempcode, 1, len); - } - - /* In all case we no longer have a previous item. We also set the - "follows varying string" flag for subsequently encountered reqbytes if - it isn't already set and we have just passed a varying length item. */ - - END_REPEAT: - previous = NULL; - cd->req_varyopt |= reqvary; - break; - - - /* Start of nested bracket sub-expression, or comment or lookahead or - lookbehind or option setting or condition. First deal with special things - that can come after a bracket; all are introduced by ?, and the appearance - of any of them means that this is not a referencing group. They were - checked for validity in the first pass over the string, so we don't have to - check for syntax errors here. */ - - case '(': - newoptions = options; - skipbytes = 0; - - if (*(++ptr) == '?') - { - int set, unset; - int *optset; - - switch (*(++ptr)) - { - case '#': /* Comment; skip to ket */ - ptr++; - while (*ptr != ')') ptr++; - continue; - - case ':': /* Non-extracting bracket */ - bravalue = OP_BRA; - ptr++; - break; - - case '(': - bravalue = OP_COND; /* Conditional group */ - - /* Condition to test for recursion */ - - if (ptr[1] == 'R') - { - code[1+LINK_SIZE] = OP_CREF; - PUT2(code, 2+LINK_SIZE, CREF_RECURSE); - skipbytes = 3; - ptr += 3; - } - - /* Condition to test for a numbered subpattern match. We know that - if a digit follows ( then there will just be digits until ) because - the syntax was checked in the first pass. */ - - else if ((digitab[ptr[1]] && ctype_digit) != 0) - { - int condref; /* Don't amalgamate; some compilers */ - condref = *(++ptr) - '0'; /* grumble at autoincrement in declaration */ - while (*(++ptr) != ')') condref = condref*10 + *ptr - '0'; - if (condref == 0) - { - *errorptr = ERR35; - goto FAILED; - } - ptr++; - code[1+LINK_SIZE] = OP_CREF; - PUT2(code, 2+LINK_SIZE, condref); - skipbytes = 3; - } - /* For conditions that are assertions, we just fall through, having - set bravalue above. */ - break; - - case '=': /* Positive lookahead */ - bravalue = OP_ASSERT; - ptr++; - break; - - case '!': /* Negative lookahead */ - bravalue = OP_ASSERT_NOT; - ptr++; - break; - - case '<': /* Lookbehinds */ - switch (*(++ptr)) - { - case '=': /* Positive lookbehind */ - bravalue = OP_ASSERTBACK; - ptr++; - break; - - case '!': /* Negative lookbehind */ - bravalue = OP_ASSERTBACK_NOT; - ptr++; - break; - } - break; - - case '>': /* One-time brackets */ - bravalue = OP_ONCE; - ptr++; - break; - - case 'C': /* Callout - may be followed by digits */ - *code++ = OP_CALLOUT; - { - int n = 0; - while ((digitab[*(++ptr)] & ctype_digit) != 0) - n = n * 10 + *ptr - '0'; - if (n > 255) - { - *errorptr = ERR38; - goto FAILED; - } - *code++ = n; - } - previous = NULL; - continue; - - case 'P': /* Named subpattern handling */ - if (*(++ptr) == '<') /* Definition */ - { - int i, namelen; - uschar *slot = cd->name_table; - const uschar *name; /* Don't amalgamate; some compilers */ - name = ++ptr; /* grumble at autoincrement in declaration */ - - while (*ptr++ != '>'); - namelen = ptr - name - 1; - - for (i = 0; i < cd->names_found; i++) - { - int crc = memcmp(name, slot+2, namelen); - if (crc == 0) - { - if (slot[2+namelen] == 0) - { - *errorptr = ERR43; - goto FAILED; - } - crc = -1; /* Current name is substring */ - } - if (crc < 0) - { - memmove(slot + cd->name_entry_size, slot, - (cd->names_found - i) * cd->name_entry_size); - break; - } - slot += cd->name_entry_size; - } - - PUT2(slot, 0, *brackets + 1); - memcpy(slot + 2, name, namelen); - slot[2+namelen] = 0; - cd->names_found++; - goto NUMBERED_GROUP; - } - - if (*ptr == '=' || *ptr == '>') /* Reference or recursion */ - { - int i, namelen; - int type = *ptr++; - const uschar *name = ptr; - uschar *slot = cd->name_table; - - while (*ptr != ')') ptr++; - namelen = ptr - name; - - for (i = 0; i < cd->names_found; i++) - { - if (strncmp((char *)name, (char *)slot+2, namelen) == 0) break; - slot += cd->name_entry_size; - } - if (i >= cd->names_found) - { - *errorptr = ERR15; - goto FAILED; - } - - recno = GET2(slot, 0); - - if (type == '>') goto HANDLE_RECURSION; /* A few lines below */ - - /* Back reference */ - - previous = code; - *code++ = OP_REF; - PUT2INC(code, 0, recno); - cd->backref_map |= (recno < 32)? (1 << recno) : 1; - if (recno > cd->top_backref) cd->top_backref = recno; - continue; - } - - /* Should never happen */ - break; - - case 'R': /* Pattern recursion */ - ptr++; /* Same as (?0) */ - /* Fall through */ - - /* Recursion or "subroutine" call */ - - case '0': case '1': case '2': case '3': case '4': - case '5': case '6': case '7': case '8': case '9': - { - const uschar *called; - recno = 0; - while((digitab[*ptr] & ctype_digit) != 0) - recno = recno * 10 + *ptr++ - '0'; - - /* Come here from code above that handles a named recursion */ - - HANDLE_RECURSION: - - previous = code; - - /* Find the bracket that is being referenced. Temporarily end the - regex in case it doesn't exist. */ - - *code = OP_END; - called = (recno == 0)? - cd->start_code : find_bracket(cd->start_code, utf8, recno); - - if (called == NULL) - { - *errorptr = ERR15; - goto FAILED; - } - - /* If the subpattern is still open, this is a recursive call. We - check to see if this is a left recursion that could loop for ever, - and diagnose that case. */ - - if (GET(called, 1) == 0 && could_be_empty(called, code, bcptr, utf8)) - { - *errorptr = ERR40; - goto FAILED; - } - - /* Insert the recursion/subroutine item */ - - *code = OP_RECURSE; - PUT(code, 1, called - cd->start_code); - code += 1 + LINK_SIZE; - } - continue; - - /* Character after (? not specially recognized */ - - default: /* Option setting */ - set = unset = 0; - optset = &set; - - while (*ptr != ')' && *ptr != ':') - { - switch (*ptr++) - { - case '-': optset = &unset; break; - - case 'i': *optset |= PCRE_CASELESS; break; - case 'm': *optset |= PCRE_MULTILINE; break; - case 's': *optset |= PCRE_DOTALL; break; - case 'x': *optset |= PCRE_EXTENDED; break; - case 'U': *optset |= PCRE_UNGREEDY; break; - case 'X': *optset |= PCRE_EXTRA; break; - } - } - - /* Set up the changed option bits, but don't change anything yet. */ - - newoptions = (options | set) & (~unset); - - /* If the options ended with ')' this is not the start of a nested - group with option changes, so the options change at this level. Compile - code to change the ims options if this setting actually changes any of - them. We also pass the new setting back so that it can be put at the - start of any following branches, and when this group ends (if we are in - a group), a resetting item can be compiled. - - Note that if this item is right at the start of the pattern, the - options will have been abstracted and made global, so there will be no - change to compile. */ - - if (*ptr == ')') - { - if ((options & PCRE_IMS) != (newoptions & PCRE_IMS)) - { - *code++ = OP_OPT; - *code++ = newoptions & PCRE_IMS; - } - - /* Change options at this level, and pass them back for use - in subsequent branches. Reset the greedy defaults and the case - value for firstbyte and reqbyte. */ - - *optionsptr = options = newoptions; - greedy_default = ((newoptions & PCRE_UNGREEDY) != 0); - greedy_non_default = greedy_default ^ 1; - req_caseopt = ((options & PCRE_CASELESS) != 0)? REQ_CASELESS : 0; - - previous = NULL; /* This item can't be repeated */ - continue; /* It is complete */ - } - - /* If the options ended with ':' we are heading into a nested group - with possible change of options. Such groups are non-capturing and are - not assertions of any kind. All we need to do is skip over the ':'; - the newoptions value is handled below. */ - - bravalue = OP_BRA; - ptr++; - } - } - - /* If PCRE_NO_AUTO_CAPTURE is set, all unadorned brackets become - non-capturing and behave like (?:...) brackets */ - - else if ((options & PCRE_NO_AUTO_CAPTURE) != 0) - { - bravalue = OP_BRA; - } - - /* Else we have a referencing group; adjust the opcode. If the bracket - number is greater than EXTRACT_BASIC_MAX, we set the opcode one higher, and - arrange for the true number to follow later, in an OP_BRANUMBER item. */ - - else - { - NUMBERED_GROUP: - if (++(*brackets) > EXTRACT_BASIC_MAX) - { - bravalue = OP_BRA + EXTRACT_BASIC_MAX + 1; - code[1+LINK_SIZE] = OP_BRANUMBER; - PUT2(code, 2+LINK_SIZE, *brackets); - skipbytes = 3; - } - else bravalue = OP_BRA + *brackets; - } - - /* Process nested bracketed re. Assertions may not be repeated, but other - kinds can be. We copy code into a non-register variable in order to be able - to pass its address because some compilers complain otherwise. Pass in a - new setting for the ims options if they have changed. */ - - previous = (bravalue >= OP_ONCE)? code : NULL; - *code = bravalue; - tempcode = code; - tempreqvary = cd->req_varyopt; /* Save value before bracket */ - - if (!compile_regex( - newoptions, /* The complete new option state */ - options & PCRE_IMS, /* The previous ims option state */ - brackets, /* Extracting bracket count */ - &tempcode, /* Where to put code (updated) */ - &ptr, /* Input pointer (updated) */ - errorptr, /* Where to put an error message */ - (bravalue == OP_ASSERTBACK || - bravalue == OP_ASSERTBACK_NOT), /* TRUE if back assert */ - skipbytes, /* Skip over OP_COND/OP_BRANUMBER */ - &subfirstbyte, /* For possible first char */ - &subreqbyte, /* For possible last char */ - bcptr, /* Current branch chain */ - cd)) /* Tables block */ - goto FAILED; - - /* At the end of compiling, code is still pointing to the start of the - group, while tempcode has been updated to point past the end of the group - and any option resetting that may follow it. The pattern pointer (ptr) - is on the bracket. */ - - /* If this is a conditional bracket, check that there are no more than - two branches in the group. */ - - else if (bravalue == OP_COND) - { - uschar *tc = code; - condcount = 0; - - do { - condcount++; - tc += GET(tc,1); - } - while (*tc != OP_KET); - - if (condcount > 2) - { - *errorptr = ERR27; - goto FAILED; - } - - /* If there is just one branch, we must not make use of its firstbyte or - reqbyte, because this is equivalent to an empty second branch. */ - - if (condcount == 1) subfirstbyte = subreqbyte = REQ_NONE; - } - - /* Handle updating of the required and first characters. Update for normal - brackets of all kinds, and conditions with two branches (see code above). - If the bracket is followed by a quantifier with zero repeat, we have to - back off. Hence the definition of zeroreqbyte and zerofirstbyte outside the - main loop so that they can be accessed for the back off. */ - - zeroreqbyte = reqbyte; - zerofirstbyte = firstbyte; - groupsetfirstbyte = FALSE; - - if (bravalue >= OP_BRA || bravalue == OP_ONCE || bravalue == OP_COND) - { - /* If we have not yet set a firstbyte in this branch, take it from the - subpattern, remembering that it was set here so that a repeat of more - than one can replicate it as reqbyte if necessary. If the subpattern has - no firstbyte, set "none" for the whole branch. In both cases, a zero - repeat forces firstbyte to "none". */ - - if (firstbyte == REQ_UNSET) - { - if (subfirstbyte >= 0) - { - firstbyte = subfirstbyte; - groupsetfirstbyte = TRUE; - } - else firstbyte = REQ_NONE; - zerofirstbyte = REQ_NONE; - } - - /* If firstbyte was previously set, convert the subpattern's firstbyte - into reqbyte if there wasn't one, using the vary flag that was in - existence beforehand. */ - - else if (subfirstbyte >= 0 && subreqbyte < 0) - subreqbyte = subfirstbyte | tempreqvary; - - /* If the subpattern set a required byte (or set a first byte that isn't - really the first byte - see above), set it. */ - - if (subreqbyte >= 0) reqbyte = subreqbyte; - } - - /* For a forward assertion, we take the reqbyte, if set. This can be - helpful if the pattern that follows the assertion doesn't set a different - char. For example, it's useful for /(?=abcde).+/. We can't set firstbyte - for an assertion, however because it leads to incorrect effect for patterns - such as /(?=a)a.+/ when the "real" "a" would then become a reqbyte instead - of a firstbyte. This is overcome by a scan at the end if there's no - firstbyte, looking for an asserted first char. */ - - else if (bravalue == OP_ASSERT && subreqbyte >= 0) reqbyte = subreqbyte; - - /* Now update the main code pointer to the end of the group. */ - - code = tempcode; - - /* Error if hit end of pattern */ - - if (*ptr != ')') - { - *errorptr = ERR14; - goto FAILED; - } - break; - - /* Check \ for being a real metacharacter; if not, fall through and handle - it as a data character at the start of a string. Escape items are checked - for validity in the pre-compiling pass. */ - - case '\\': - tempptr = ptr; - c = check_escape(&ptr, errorptr, *brackets, options, FALSE); - - /* Handle metacharacters introduced by \. For ones like \d, the ESC_ values - are arranged to be the negation of the corresponding OP_values. For the - back references, the values are ESC_REF plus the reference number. Only - back references and those types that consume a character may be repeated. - We can test for values between ESC_b and ESC_Z for the latter; this may - have to change if any new ones are ever created. */ - - if (c < 0) - { - if (-c == ESC_Q) /* Handle start of quoted string */ - { - if (ptr[1] == '\\' && ptr[2] == 'E') ptr += 2; /* avoid empty string */ - else inescq = TRUE; - continue; - } - - /* For metasequences that actually match a character, we disable the - setting of a first character if it hasn't already been set. */ - - if (firstbyte == REQ_UNSET && -c > ESC_b && -c < ESC_Z) - firstbyte = REQ_NONE; - - /* Set values to reset to if this is followed by a zero repeat. */ - - zerofirstbyte = firstbyte; - zeroreqbyte = reqbyte; - - /* Back references are handled specially */ - - if (-c >= ESC_REF) - { - int number = -c - ESC_REF; - previous = code; - *code++ = OP_REF; - PUT2INC(code, 0, number); - } - else - { - previous = (-c > ESC_b && -c < ESC_Z)? code : NULL; - *code++ = -c; - } - continue; - } - - /* Data character: reset and fall through */ - - ptr = tempptr; - c = '\\'; - - /* Handle a run of data characters until a metacharacter is encountered. - The first character is guaranteed not to be whitespace or # when the - extended flag is set. */ - - NORMAL_CHAR: - default: - previous = code; - *code = OP_CHARS; - code += 2; - length = 0; - - do - { - /* If in \Q...\E, check for the end; if not, we always have a literal */ - - if (inescq) - { - if (c == '\\' && ptr[1] == 'E') - { - inescq = FALSE; - ptr++; - } - else - { - *code++ = c; - length++; - } - continue; - } - - /* Skip white space and comments for /x patterns */ - - if ((options & PCRE_EXTENDED) != 0) - { - if ((cd->ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != NEWLINE) ; - if (c == 0) break; - continue; - } - } - - /* Backslash may introduce a data char or a metacharacter. Escaped items - are checked for validity in the pre-compiling pass. Stop the string - before a metaitem. */ - - if (c == '\\') - { - tempptr = ptr; - c = check_escape(&ptr, errorptr, *brackets, options, FALSE); - if (c < 0) { ptr = tempptr; break; } - - /* If a character is > 127 in UTF-8 mode, we have to turn it into - two or more bytes in the UTF-8 encoding. */ - -#ifdef SUPPORT_UTF8 - if (utf8 && c > 127) - { - uschar buffer[8]; - int len = ord2utf8(c, buffer); - for (c = 0; c < len; c++) *code++ = buffer[c]; - length += len; - continue; - } -#endif - } - - /* Ordinary character or single-char escape */ - - *code++ = c; - length++; - } - - /* This "while" is the end of the "do" above. */ - - while (length < MAXLIT && (cd->ctypes[c = *(++ptr)] & ctype_meta) == 0); - - /* Update the first and last requirements. These are always bytes, even in - UTF-8 mode. However, there is a special case to be considered when there - are only one or two characters. Because this gets messy in UTF-8 mode, the - code is kept separate. When we get here "length" contains the number of - bytes. */ - -#ifdef SUPPORT_UTF8 - if (utf8 && length > 1) - { - uschar *t = previous + 3; /* After this code, t */ - while (t < code && (*t & 0xc0) == 0x80) t++; /* follows the 1st char */ - - /* Handle the case when there is only one multibyte character. It must - have at least two bytes because of the "length > 1" test above. */ - - if (t == code) - { - /* If no previous first byte, set it from this character, but revert to - none on a zero repeat. */ - - if (firstbyte == REQ_UNSET) - { - zerofirstbyte = REQ_NONE; - firstbyte = previous[2]; - } - - /* Otherwise, leave the first byte value alone, and don't change it on - a zero repeat */ - - else zerofirstbyte = firstbyte; - - /* In both cases, a zero repeat resets the previous required byte */ - - zeroreqbyte = reqbyte; - } - - /* Handle the case when there is more than one character. These may be - single-byte or multibyte characters */ - - else - { - t = code - 1; /* After this code, t is at the */ - while ((*t & 0xc0) == 0x80) t--; /* start of the last character */ - - /* If no previous first byte, set it from the first character, and - retain it on a zero repeat (of the last character). The required byte - is reset on a zero repeat, either to the byte before the last - character, unless this is the first byte of the string. In that case, - it reverts to its previous value. */ - - if (firstbyte == REQ_UNSET) - { - zerofirstbyte = firstbyte = previous[2] | req_caseopt; - zeroreqbyte = (t - 1 == previous + 2)? - reqbyte : t[-1] | req_caseopt | cd->req_varyopt; - } - - /* If there was a previous first byte, leave it alone, and don't change - it on a zero repeat. The required byte is reset on a zero repeat to the - byte before the last character. */ - - else - { - zerofirstbyte = firstbyte; - zeroreqbyte = t[-1] | req_caseopt | cd->req_varyopt; - } - } - - /* In all cases (we know length > 1), the new required byte is the last - byte of the string. */ - - reqbyte = code[-1] | req_caseopt | cd->req_varyopt; - } - - else /* End of UTF-8 coding */ -#endif - - /* This is the code for non-UTF-8 operation, either without UTF-8 support, - or when UTF-8 is not enabled. */ - - { - /* firstbyte was not previously set; take it from this string */ - - if (firstbyte == REQ_UNSET) - { - if (length == 1) - { - zerofirstbyte = REQ_NONE; - firstbyte = previous[2] | req_caseopt; - zeroreqbyte = reqbyte; - } - else - { - zerofirstbyte = firstbyte = previous[2] | req_caseopt; - zeroreqbyte = (length > 2)? - (code[-2] | req_caseopt | cd->req_varyopt) : reqbyte; - reqbyte = code[-1] | req_caseopt | cd->req_varyopt; - } - } - - /* firstbyte was previously set */ - - else - { - zerofirstbyte = firstbyte; - zeroreqbyte = (length == 1)? reqbyte : - code[-2] | req_caseopt | cd->req_varyopt; - reqbyte = code[-1] | req_caseopt | cd->req_varyopt; - } - } - - /* Set the length in the data vector, and advance to the next state. */ - - previous[1] = length; - if (length < MAXLIT) ptr--; - break; - } - } /* end of big loop */ - -/* Control never reaches here by falling through, only by a goto for all the -error states. Pass back the position in the pattern so that it can be displayed -to the user for diagnosing the error. */ - -FAILED: -*ptrptr = ptr; -return FALSE; -} - - - - -/************************************************* -* Compile sequence of alternatives * -*************************************************/ - -/* On entry, ptr is pointing past the bracket character, but on return -it points to the closing bracket, or vertical bar, or end of string. -The code variable is pointing at the byte into which the BRA operator has been -stored. If the ims options are changed at the start (for a (?ims: group) or -during any branch, we need to insert an OP_OPT item at the start of every -following branch to ensure they get set correctly at run time, and also pass -the new options into every subsequent branch compile. - -Argument: - options option bits, including any changes for this subpattern - oldims previous settings of ims option bits - brackets -> int containing the number of extracting brackets used - codeptr -> the address of the current code pointer - ptrptr -> the address of the current pattern pointer - errorptr -> pointer to error message - lookbehind TRUE if this is a lookbehind assertion - skipbytes skip this many bytes at start (for OP_COND, OP_BRANUMBER) - firstbyteptr place to put the first required character, or a negative number - reqbyteptr place to put the last required character, or a negative number - bcptr pointer to the chain of currently open branches - cd points to the data block with tables pointers etc. - -Returns: TRUE on success -*/ - -static BOOL -compile_regex(int options, int oldims, int *brackets, uschar **codeptr, - const uschar **ptrptr, const char **errorptr, BOOL lookbehind, int skipbytes, - int *firstbyteptr, int *reqbyteptr, branch_chain *bcptr, compile_data *cd) -{ -const uschar *ptr = *ptrptr; -uschar *code = *codeptr; -uschar *last_branch = code; -uschar *start_bracket = code; -uschar *reverse_count = NULL; -int firstbyte, reqbyte; -int branchfirstbyte, branchreqbyte; -branch_chain bc; - -bc.outer = bcptr; -bc.current = code; - -firstbyte = reqbyte = REQ_UNSET; - -/* Offset is set zero to mark that this bracket is still open */ - -PUT(code, 1, 0); -code += 1 + LINK_SIZE + skipbytes; - -/* Loop for each alternative branch */ - -for (;;) - { - /* Handle a change of ims options at the start of the branch */ - - if ((options & PCRE_IMS) != oldims) - { - *code++ = OP_OPT; - *code++ = options & PCRE_IMS; - } - - /* Set up dummy OP_REVERSE if lookbehind assertion */ - - if (lookbehind) - { - *code++ = OP_REVERSE; - reverse_count = code; - PUTINC(code, 0, 0); - } - - /* Now compile the branch */ - - if (!compile_branch(&options, brackets, &code, &ptr, errorptr, - &branchfirstbyte, &branchreqbyte, &bc, cd)) - { - *ptrptr = ptr; - return FALSE; - } - - /* If this is the first branch, the firstbyte and reqbyte values for the - branch become the values for the regex. */ - - if (*last_branch != OP_ALT) - { - firstbyte = branchfirstbyte; - reqbyte = branchreqbyte; - } - - /* If this is not the first branch, the first char and reqbyte have to - match the values from all the previous branches, except that if the previous - value for reqbyte didn't have REQ_VARY set, it can still match, and we set - REQ_VARY for the regex. */ - - else - { - /* If we previously had a firstbyte, but it doesn't match the new branch, - we have to abandon the firstbyte for the regex, but if there was previously - no reqbyte, it takes on the value of the old firstbyte. */ - - if (firstbyte >= 0 && firstbyte != branchfirstbyte) - { - if (reqbyte < 0) reqbyte = firstbyte; - firstbyte = REQ_NONE; - } - - /* If we (now or from before) have no firstbyte, a firstbyte from the - branch becomes a reqbyte if there isn't a branch reqbyte. */ - - if (firstbyte < 0 && branchfirstbyte >= 0 && branchreqbyte < 0) - branchreqbyte = branchfirstbyte; - - /* Now ensure that the reqbytes match */ - - if ((reqbyte & ~REQ_VARY) != (branchreqbyte & ~REQ_VARY)) - reqbyte = REQ_NONE; - else reqbyte |= branchreqbyte; /* To "or" REQ_VARY */ - } - - /* If lookbehind, check that this branch matches a fixed-length string, - and put the length into the OP_REVERSE item. Temporarily mark the end of - the branch with OP_END. */ - - if (lookbehind) - { - int length; - *code = OP_END; - length = find_fixedlength(last_branch, options); - DPRINTF(("fixed length = %d\n", length)); - if (length < 0) - { - *errorptr = (length == -2)? ERR36 : ERR25; - *ptrptr = ptr; - return FALSE; - } - PUT(reverse_count, 0, length); - } - - /* Reached end of expression, either ')' or end of pattern. Go back through - the alternative branches and reverse the chain of offsets, with the field in - the BRA item now becoming an offset to the first alternative. If there are - no alternatives, it points to the end of the group. The length in the - terminating ket is always the length of the whole bracketed item. If any of - the ims options were changed inside the group, compile a resetting op-code - following, except at the very end of the pattern. Return leaving the pointer - at the terminating char. */ - - if (*ptr != '|') - { - int length = code - last_branch; - do - { - int prev_length = GET(last_branch, 1); - PUT(last_branch, 1, length); - length = prev_length; - last_branch -= length; - } - while (length > 0); - - /* Fill in the ket */ - - *code = OP_KET; - PUT(code, 1, code - start_bracket); - code += 1 + LINK_SIZE; - - /* Resetting option if needed */ - - if ((options & PCRE_IMS) != oldims && *ptr == ')') - { - *code++ = OP_OPT; - *code++ = oldims; - } - - /* Set values to pass back */ - - *codeptr = code; - *ptrptr = ptr; - *firstbyteptr = firstbyte; - *reqbyteptr = reqbyte; - return TRUE; - } - - /* Another branch follows; insert an "or" node. Its length field points back - to the previous branch while the bracket remains open. At the end the chain - is reversed. It's done like this so that the start of the bracket has a - zero offset until it is closed, making it possible to detect recursion. */ - - *code = OP_ALT; - PUT(code, 1, code - last_branch); - bc.current = last_branch = code; - code += 1 + LINK_SIZE; - ptr++; - } -/* Control never reaches here */ -} - - - - -/************************************************* -* Check for anchored expression * -*************************************************/ - -/* Try to find out if this is an anchored regular expression. Consider each -alternative branch. If they all start with OP_SOD or OP_CIRC, or with a bracket -all of whose alternatives start with OP_SOD or OP_CIRC (recurse ad lib), then -it's anchored. However, if this is a multiline pattern, then only OP_SOD -counts, since OP_CIRC can match in the middle. - -We can also consider a regex to be anchored if OP_SOM starts all its branches. -This is the code for \G, which means "match at start of match position, taking -into account the match offset". - -A branch is also implicitly anchored if it starts with .* and DOTALL is set, -because that will try the rest of the pattern at all possible matching points, -so there is no point trying again.... er .... - -.... except when the .* appears inside capturing parentheses, and there is a -subsequent back reference to those parentheses. We haven't enough information -to catch that case precisely. - -At first, the best we could do was to detect when .* was in capturing brackets -and the highest back reference was greater than or equal to that level. -However, by keeping a bitmap of the first 31 back references, we can catch some -of the more common cases more precisely. - -Arguments: - code points to start of expression (the bracket) - options points to the options setting - bracket_map a bitmap of which brackets we are inside while testing; this - handles up to substring 31; after that we just have to take - the less precise approach - backref_map the back reference bitmap - -Returns: TRUE or FALSE -*/ - -static BOOL -is_anchored(register const uschar *code, int *options, unsigned int bracket_map, - unsigned int backref_map) -{ -do { - const uschar *scode = - first_significant_code(code + 1+LINK_SIZE, options, PCRE_MULTILINE); - register int op = *scode; - - /* Capturing brackets */ - - if (op > OP_BRA) - { - int new_map; - op -= OP_BRA; - if (op > EXTRACT_BASIC_MAX) op = GET2(scode, 2+LINK_SIZE); - new_map = bracket_map | ((op < 32)? (1 << op) : 1); - if (!is_anchored(scode, options, new_map, backref_map)) return FALSE; - } - - /* Other brackets */ - - else if (op == OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND) - { - if (!is_anchored(scode, options, bracket_map, backref_map)) return FALSE; - } - - /* .* is not anchored unless DOTALL is set and it isn't in brackets that - are or may be referenced. */ - - else if ((op == OP_TYPESTAR || op == OP_TYPEMINSTAR) && - (*options & PCRE_DOTALL) != 0) - { - if (scode[1] != OP_ANY || (bracket_map & backref_map) != 0) return FALSE; - } - - /* Check for explicit anchoring */ - - else if (op != OP_SOD && op != OP_SOM && - ((*options & PCRE_MULTILINE) != 0 || op != OP_CIRC)) - return FALSE; - code += GET(code, 1); - } -while (*code == OP_ALT); /* Loop for each alternative */ -return TRUE; -} - - - -/************************************************* -* Check for starting with ^ or .* * -*************************************************/ - -/* This is called to find out if every branch starts with ^ or .* so that -"first char" processing can be done to speed things up in multiline -matching and for non-DOTALL patterns that start with .* (which must start at -the beginning or after \n). As in the case of is_anchored() (see above), we -have to take account of back references to capturing brackets that contain .* -because in that case we can't make the assumption. - -Arguments: - code points to start of expression (the bracket) - bracket_map a bitmap of which brackets we are inside while testing; this - handles up to substring 31; after that we just have to take - the less precise approach - backref_map the back reference bitmap - -Returns: TRUE or FALSE -*/ - -static BOOL -is_startline(const uschar *code, unsigned int bracket_map, - unsigned int backref_map) -{ -do { - const uschar *scode = first_significant_code(code + 1+LINK_SIZE, NULL, 0); - register int op = *scode; - - /* Capturing brackets */ - - if (op > OP_BRA) - { - int new_map; - op -= OP_BRA; - if (op > EXTRACT_BASIC_MAX) op = GET2(scode, 2+LINK_SIZE); - new_map = bracket_map | ((op < 32)? (1 << op) : 1); - if (!is_startline(scode, new_map, backref_map)) return FALSE; - } - - /* Other brackets */ - - else if (op == OP_BRA || op == OP_ASSERT || op == OP_ONCE || op == OP_COND) - { if (!is_startline(scode, bracket_map, backref_map)) return FALSE; } - - /* .* is not anchored unless DOTALL is set and it isn't in brackets that - may be referenced. */ - - else if (op == OP_TYPESTAR || op == OP_TYPEMINSTAR) - { - if (scode[1] != OP_ANY || (bracket_map & backref_map) != 0) return FALSE; - } - - /* Check for explicit circumflex */ - - else if (op != OP_CIRC) return FALSE; - code += GET(code, 1); - } -while (*code == OP_ALT); /* Loop for each alternative */ -return TRUE; -} - - - -/************************************************* -* Check for asserted fixed first char * -*************************************************/ - -/* During compilation, the "first char" settings from forward assertions are -discarded, because they can cause conflicts with actual literals that follow. -However, if we end up without a first char setting for an unanchored pattern, -it is worth scanning the regex to see if there is an initial asserted first -char. If all branches start with the same asserted char, or with a bracket all -of whose alternatives start with the same asserted char (recurse ad lib), then -we return that char, otherwise -1. - -Arguments: - code points to start of expression (the bracket) - options pointer to the options (used to check casing changes) - inassert TRUE if in an assertion - -Returns: -1 or the fixed first char -*/ - -static int -find_firstassertedchar(const uschar *code, int *options, BOOL inassert) -{ -register int c = -1; -do { - int d; - const uschar *scode = - first_significant_code(code + 1+LINK_SIZE, options, PCRE_CASELESS); - register int op = *scode; - - if (op >= OP_BRA) op = OP_BRA; - - switch(op) - { - default: - return -1; - - case OP_BRA: - case OP_ASSERT: - case OP_ONCE: - case OP_COND: - if ((d = find_firstassertedchar(scode, options, op == OP_ASSERT)) < 0) - return -1; - if (c < 0) c = d; else if (c != d) return -1; - break; - - case OP_EXACT: /* Fall through */ - scode++; - - case OP_CHARS: /* Fall through */ - scode++; - - case OP_PLUS: - case OP_MINPLUS: - if (!inassert) return -1; - if (c < 0) - { - c = scode[1]; - if ((*options & PCRE_CASELESS) != 0) c |= REQ_CASELESS; - } - else if (c != scode[1]) return -1; - break; - } - - code += GET(code, 1); - } -while (*code == OP_ALT); -return c; -} - - - - -#ifdef SUPPORT_UTF8 -/************************************************* -* Validate a UTF-8 string * -*************************************************/ - -/* This function is called (optionally) at the start of compile or match, to -validate that a supposed UTF-8 string is actually valid. The early check means -that subsequent code can assume it is dealing with a valid string. The check -can be turned off for maximum performance, but then consequences of supplying -an invalid string are then undefined. - -Arguments: - string points to the string - length length of string, or -1 if the string is zero-terminated - -Returns: < 0 if the string is a valid UTF-8 string - >= 0 otherwise; the value is the offset of the bad byte -*/ - -static int -valid_utf8(const uschar *string, int length) -{ -register const uschar *p; - -if (length < 0) - { - for (p = string; *p != 0; p++); - length = p - string; - } - -for (p = string; length-- > 0; p++) - { - register int ab; - register int c = *p; - if (c < 128) continue; - if ((c & 0xc0) != 0xc0) return p - string; - ab = utf8_table4[c & 0x3f]; /* Number of additional bytes */ - if (length < ab) return p - string; - length -= ab; - - /* Check top bits in the second byte */ - if ((*(++p) & 0xc0) != 0x80) return p - string; - - /* Check for overlong sequences for each different length */ - switch (ab) - { - /* Check for xx00 000x */ - case 1: - if ((c & 0x3e) == 0) return p - string; - continue; /* We know there aren't any more bytes to check */ - - /* Check for 1110 0000, xx0x xxxx */ - case 2: - if (c == 0xe0 && (*p & 0x20) == 0) return p - string; - break; - - /* Check for 1111 0000, xx00 xxxx */ - case 3: - if (c == 0xf0 && (*p & 0x30) == 0) return p - string; - break; - - /* Check for 1111 1000, xx00 0xxx */ - case 4: - if (c == 0xf8 && (*p & 0x38) == 0) return p - string; - break; - - /* Check for leading 0xfe or 0xff, and then for 1111 1100, xx00 00xx */ - case 5: - if (c == 0xfe || c == 0xff || - (c == 0xfc && (*p & 0x3c) == 0)) return p - string; - break; - } - - /* Check for valid bytes after the 2nd, if any; all must start 10 */ - while (--ab > 0) - { - if ((*(++p) & 0xc0) != 0x80) return p - string; - } - } - -return -1; -} -#endif - - - -/************************************************* -* Compile a Regular Expression * -*************************************************/ - -/* This function takes a string and returns a pointer to a block of store -holding a compiled version of the expression. - -Arguments: - pattern the regular expression - options various option bits - errorptr pointer to pointer to error text - erroroffset ptr offset in pattern where error was detected - tables pointer to character tables or NULL - -Returns: pointer to compiled data block, or NULL on error, - with errorptr and erroroffset set -*/ - -EXPORT pcre * -pcre_compile(const char *pattern, int options, const char **errorptr, - int *erroroffset, const unsigned char *tables) -{ -real_pcre *re; -int length = 1 + LINK_SIZE; /* For initial BRA plus length */ -int runlength; -int c, firstbyte, reqbyte; -int bracount = 0; -int branch_extra = 0; -int branch_newextra; -int item_count = -1; -int name_count = 0; -int max_name_size = 0; -#ifdef SUPPORT_UTF8 -int lastcharlength = 0; -BOOL utf8; -BOOL class_utf8; -#endif -BOOL inescq = FALSE; -unsigned int brastackptr = 0; -size_t size; -uschar *code; -const uschar *codestart; -const uschar *ptr; -compile_data compile_block; -int brastack[BRASTACK_SIZE]; -uschar bralenstack[BRASTACK_SIZE]; - -/* We can't pass back an error message if errorptr is NULL; I guess the best we -can do is just return NULL. */ - -if (errorptr == NULL) return NULL; -*errorptr = NULL; - -/* However, we can give a message for this error */ - -if (erroroffset == NULL) - { - *errorptr = ERR16; - return NULL; - } -*erroroffset = 0; - -/* Can't support UTF8 unless PCRE has been compiled to include the code. */ - -#ifdef SUPPORT_UTF8 -utf8 = (options & PCRE_UTF8) != 0; -if (utf8 && (options & PCRE_NO_UTF8_CHECK) == 0 && - (*erroroffset = valid_utf8((uschar *)pattern, -1)) >= 0) - { - *errorptr = ERR44; - return NULL; - } -#else -if ((options & PCRE_UTF8) != 0) - { - *errorptr = ERR32; - return NULL; - } -#endif - -if ((options & ~PUBLIC_OPTIONS) != 0) - { - *errorptr = ERR17; - return NULL; - } - -/* Set up pointers to the individual character tables */ - -if (tables == NULL) tables = pcre_default_tables; -compile_block.lcc = tables + lcc_offset; -compile_block.fcc = tables + fcc_offset; -compile_block.cbits = tables + cbits_offset; -compile_block.ctypes = tables + ctypes_offset; - -/* Maximum back reference and backref bitmap. This is updated for numeric -references during the first pass, but for named references during the actual -compile pass. The bitmap records up to 31 back references to help in deciding -whether (.*) can be treated as anchored or not. */ - -compile_block.top_backref = 0; -compile_block.backref_map = 0; - -/* Reflect pattern for debugging output */ - -DPRINTF(("------------------------------------------------------------------\n")); -DPRINTF(("%s\n", pattern)); - -/* The first thing to do is to make a pass over the pattern to compute the -amount of store required to hold the compiled code. This does not have to be -perfect as long as errors are overestimates. At the same time we can detect any -flag settings right at the start, and extract them. Make an attempt to correct -for any counted white space if an "extended" flag setting appears late in the -pattern. We can't be so clever for #-comments. */ - -ptr = (const uschar *)(pattern - 1); -while ((c = *(++ptr)) != 0) - { - int min, max; - int class_optcount; - int bracket_length; - int duplength; - - /* If we are inside a \Q...\E sequence, all chars are literal */ - - if (inescq) goto NORMAL_CHAR; - - /* Otherwise, first check for ignored whitespace and comments */ - - if ((options & PCRE_EXTENDED) != 0) - { - if ((compile_block.ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != NEWLINE) ; - if (c == 0) break; - continue; - } - } - - item_count++; /* Is zero for the first non-comment item */ - - switch(c) - { - /* A backslashed item may be an escaped "normal" character or a - character type. For a "normal" character, put the pointers and - character back so that tests for whitespace etc. in the input - are done correctly. */ - - case '\\': - { - const uschar *save_ptr = ptr; - c = check_escape(&ptr, errorptr, bracount, options, FALSE); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if (c >= 0) - { - ptr = save_ptr; - c = '\\'; - goto NORMAL_CHAR; - } - } - - /* If \Q, enter "literal" mode */ - - if (-c == ESC_Q) - { - inescq = TRUE; - continue; - } - - /* Other escapes need one byte, and are of length one for repeats */ - - length++; -#ifdef SUPPORT_UTF8 - lastcharlength = 1; -#endif - - /* A back reference needs an additional 2 bytes, plus either one or 5 - bytes for a repeat. We also need to keep the value of the highest - back reference. */ - - if (c <= -ESC_REF) - { - int refnum = -c - ESC_REF; - compile_block.backref_map |= (refnum < 32)? (1 << refnum) : 1; - if (refnum > compile_block.top_backref) - compile_block.top_backref = refnum; - length += 2; /* For single back reference */ - if (ptr[1] == '{' && is_counted_repeat(ptr+2)) - { - ptr = read_repeat_counts(ptr+2, &min, &max, errorptr); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if ((min == 0 && (max == 1 || max == -1)) || - (min == 1 && max == -1)) - length++; - else length += 5; - if (ptr[1] == '?') ptr++; - } - } - continue; - - case '^': /* Single-byte metacharacters */ - case '.': - case '$': - length++; -#ifdef SUPPORT_UTF8 - lastcharlength = 1; -#endif - continue; - - case '*': /* These repeats won't be after brackets; */ - case '+': /* those are handled separately */ - case '?': - length++; - goto POSESSIVE; /* A few lines below */ - - /* This covers the cases of braced repeats after a single char, metachar, - class, or back reference. */ - - case '{': - if (!is_counted_repeat(ptr+1)) goto NORMAL_CHAR; - ptr = read_repeat_counts(ptr+1, &min, &max, errorptr); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - - /* These special cases just insert one extra opcode */ - - if ((min == 0 && (max == 1 || max == -1)) || - (min == 1 && max == -1)) - length++; - - /* These cases might insert additional copies of a preceding character. */ - - else - { -#ifdef SUPPORT_UTF8 - /* In UTF-8 mode, we should find the length in lastcharlength */ - if (utf8) - { - if (min != 1) - { - length -= lastcharlength; /* Uncount the original char or metachar */ - if (min > 0) length += 3 + lastcharlength; - } - length += lastcharlength + ((max > 0)? 3 : 1); - } - else -#endif - - /* Not UTF-8 mode: all characters are one byte */ - { - if (min != 1) - { - length--; /* Uncount the original char or metachar */ - if (min > 0) length += 4; - } - - length += (max > 0)? 4 : 2; - } - } - - if (ptr[1] == '?') ptr++; /* Needs no extra length */ - - POSESSIVE: /* Test for possessive quantifier */ - if (ptr[1] == '+') - { - ptr++; - length += 2 + 2*LINK_SIZE; /* Allow for atomic brackets */ - } - continue; - - /* An alternation contains an offset to the next branch or ket. If any ims - options changed in the previous branch(es), and/or if we are in a - lookbehind assertion, extra space will be needed at the start of the - branch. This is handled by branch_extra. */ - - case '|': - length += 1 + LINK_SIZE + branch_extra; - continue; - - /* A character class uses 33 characters provided that all the character - values are less than 256. Otherwise, it uses a bit map for low valued - characters, and individual items for others. Don't worry about character - types that aren't allowed in classes - they'll get picked up during the - compile. A character class that contains only one single-byte character - uses 2 or 3 bytes, depending on whether it is negated or not. Notice this - where we can. (In UTF-8 mode we can do this only for chars < 128.) */ - - case '[': - class_optcount = 0; - -#ifdef SUPPORT_UTF8 - class_utf8 = FALSE; -#endif - - if (*(++ptr) == '^') ptr++; - - /* Written as a "do" so that an initial ']' is taken as data */ - - if (*ptr != 0) do - { - /* Inside \Q...\E everything is literal except \E */ - - if (inescq) - { - if (*ptr != '\\' || ptr[1] != 'E') goto NON_SPECIAL_CHARACTER; - inescq = FALSE; - ptr += 1; - continue; - } - - /* Outside \Q...\E, check for escapes */ - - if (*ptr == '\\') - { -#ifdef SUPPORT_UTF8 - int prevchar = ptr[-1]; -#endif - int ch = check_escape(&ptr, errorptr, bracount, options, TRUE); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - - /* \b is backspace inside a class */ - - if (-ch == ESC_b) ch = '\b'; - - /* \Q enters quoting mode */ - - if (-ch == ESC_Q) - { - inescq = TRUE; - continue; - } - - /* Handle escapes that turn into characters */ - - if (ch >= 0) - { -#ifdef SUPPORT_UTF8 - if (utf8) - { - if (ch > 127) class_optcount = 10; /* Ensure > 1 */ - if (ch > 255) - { - uschar buffer[6]; - if (!class_utf8) - { - class_utf8 = TRUE; - length += LINK_SIZE + 1 + 1; - } - length += 1 + ord2utf8(ch, buffer); - - /* If this wide character is preceded by '-', add an extra 2 to - the length in case the previous character was < 128, because in - this case the whole range will be put into the list. */ - - if (prevchar == '-') length += 2; - } - } -#endif - class_optcount++; /* for possible optimization */ - } - else class_optcount = 10; /* \d, \s etc; make sure > 1 */ - } - - /* Check the syntax for POSIX stuff. The bits we actually handle are - checked during the real compile phase. */ - - else if (*ptr == '[' && check_posix_syntax(ptr, &ptr, &compile_block)) - { - ptr++; - class_optcount = 10; /* Make sure > 1 */ - } - - /* Anything else just increments the possible optimization count. If - there are wide characters, we are going to have to use an XCLASS. */ - - else - { - NON_SPECIAL_CHARACTER: - class_optcount++; - -#ifdef SUPPORT_UTF8 - if (utf8) - { - int ch; - int extra = 0; - GETCHARLEN(ch, ptr, extra); - if (ch > 127) class_optcount = 10; /* No optimization possible */ - if (ch > 255) - { - if (!class_utf8) - { - class_utf8 = TRUE; - length += LINK_SIZE + 1 + 1; - } - length += 2 + extra; - - /* If this wide character is preceded by '-', add an extra 2 to - the length in case the previous character was < 128, because in - this case the whole range will be put into the list. */ - - if (ptr[-1] == '-') length += 2; - - /* Advance to the end of this character */ - - ptr += extra; - } - } -#endif - } - } - while (*(++ptr) != 0 && (inescq || *ptr != ']')); /* Concludes "do" above */ - - if (*ptr == 0) /* Missing terminating ']' */ - { - *errorptr = ERR6; - goto PCRE_ERROR_RETURN; - } - - /* We can optimize when there was only one optimizable character. Repeats - for positive and negated single one-byte chars are handled by the general - code. Here, we handle repeats for the class opcodes. */ - - if (class_optcount == 1) length += 3; else - { - length += 33; - - /* A repeat needs either 1 or 5 bytes. If it is a possessive quantifier, - we also need extra for wrapping the whole thing in a sub-pattern. */ - - if (*ptr != 0 && ptr[1] == '{' && is_counted_repeat(ptr+2)) - { - ptr = read_repeat_counts(ptr+2, &min, &max, errorptr); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if ((min == 0 && (max == 1 || max == -1)) || - (min == 1 && max == -1)) - length++; - else length += 5; - if (ptr[1] == '+') - { - ptr++; - length += 2 + 2*LINK_SIZE; - } - else if (ptr[1] == '?') ptr++; - } - } - continue; - - /* Brackets may be genuine groups or special things */ - - case '(': - branch_newextra = 0; - bracket_length = 1 + LINK_SIZE; - - /* Handle special forms of bracket, which all start (? */ - - if (ptr[1] == '?') - { - int set, unset; - int *optset; - - switch (c = ptr[2]) - { - /* Skip over comments entirely */ - case '#': - ptr += 3; - while (*ptr != 0 && *ptr != ')') ptr++; - if (*ptr == 0) - { - *errorptr = ERR18; - goto PCRE_ERROR_RETURN; - } - continue; - - /* Non-referencing groups and lookaheads just move the pointer on, and - then behave like a non-special bracket, except that they don't increment - the count of extracting brackets. Ditto for the "once only" bracket, - which is in Perl from version 5.005. */ - - case ':': - case '=': - case '!': - case '>': - ptr += 2; - break; - - /* (?R) specifies a recursive call to the regex, which is an extension - to provide the facility which can be obtained by (?p{perl-code}) in - Perl 5.6. In Perl 5.8 this has become (??{perl-code}). - - From PCRE 4.00, items such as (?3) specify subroutine-like "calls" to - the appropriate numbered brackets. This includes both recursive and - non-recursive calls. (?R) is now synonymous with (?0). */ - - case 'R': - ptr++; - - case '0': case '1': case '2': case '3': case '4': - case '5': case '6': case '7': case '8': case '9': - ptr += 2; - if (c != 'R') - while ((digitab[*(++ptr)] & ctype_digit) != 0); - if (*ptr != ')') - { - *errorptr = ERR29; - goto PCRE_ERROR_RETURN; - } - length += 1 + LINK_SIZE; - - /* If this item is quantified, it will get wrapped inside brackets so - as to use the code for quantified brackets. We jump down and use the - code that handles this for real brackets. */ - - if (ptr[1] == '+' || ptr[1] == '*' || ptr[1] == '?' || ptr[1] == '{') - { - length += 2 + 2 * LINK_SIZE; /* to make bracketed */ - duplength = 5 + 3 * LINK_SIZE; - goto HANDLE_QUANTIFIED_BRACKETS; - } - continue; - - /* (?C) is an extension which provides "callout" - to provide a bit of - the functionality of the Perl (?{...}) feature. An optional number may - follow (default is zero). */ - - case 'C': - ptr += 2; - while ((digitab[*(++ptr)] & ctype_digit) != 0); - if (*ptr != ')') - { - *errorptr = ERR39; - goto PCRE_ERROR_RETURN; - } - length += 2; - continue; - - /* Named subpatterns are an extension copied from Python */ - - case 'P': - ptr += 3; - if (*ptr == '<') - { - const uschar *p; /* Don't amalgamate; some compilers */ - p = ++ptr; /* grumble at autoincrement in declaration */ - while ((compile_block.ctypes[*ptr] & ctype_word) != 0) ptr++; - if (*ptr != '>') - { - *errorptr = ERR42; - goto PCRE_ERROR_RETURN; - } - name_count++; - if (ptr - p > max_name_size) max_name_size = (ptr - p); - break; - } - - if (*ptr == '=' || *ptr == '>') - { - while ((compile_block.ctypes[*(++ptr)] & ctype_word) != 0); - if (*ptr != ')') - { - *errorptr = ERR42; - goto PCRE_ERROR_RETURN; - } - break; - } - - /* Unknown character after (?P */ - - *errorptr = ERR41; - goto PCRE_ERROR_RETURN; - - /* Lookbehinds are in Perl from version 5.005 */ - - case '<': - ptr += 3; - if (*ptr == '=' || *ptr == '!') - { - branch_newextra = 1 + LINK_SIZE; - length += 1 + LINK_SIZE; /* For the first branch */ - break; - } - *errorptr = ERR24; - goto PCRE_ERROR_RETURN; - - /* Conditionals are in Perl from version 5.005. The bracket must either - be followed by a number (for bracket reference) or by an assertion - group, or (a PCRE extension) by 'R' for a recursion test. */ - - case '(': - if (ptr[3] == 'R' && ptr[4] == ')') - { - ptr += 4; - length += 3; - } - else if ((digitab[ptr[3]] & ctype_digit) != 0) - { - ptr += 4; - length += 3; - while ((digitab[*ptr] & ctype_digit) != 0) ptr++; - if (*ptr != ')') - { - *errorptr = ERR26; - goto PCRE_ERROR_RETURN; - } - } - else /* An assertion must follow */ - { - ptr++; /* Can treat like ':' as far as spacing is concerned */ - if (ptr[2] != '?' || - (ptr[3] != '=' && ptr[3] != '!' && ptr[3] != '<') ) - { - ptr += 2; /* To get right offset in message */ - *errorptr = ERR28; - goto PCRE_ERROR_RETURN; - } - } - break; - - /* Else loop checking valid options until ) is met. Anything else is an - error. If we are without any brackets, i.e. at top level, the settings - act as if specified in the options, so massage the options immediately. - This is for backward compatibility with Perl 5.004. */ - - default: - set = unset = 0; - optset = &set; - ptr += 2; - - for (;; ptr++) - { - c = *ptr; - switch (c) - { - case 'i': - *optset |= PCRE_CASELESS; - continue; - - case 'm': - *optset |= PCRE_MULTILINE; - continue; - - case 's': - *optset |= PCRE_DOTALL; - continue; - - case 'x': - *optset |= PCRE_EXTENDED; - continue; - - case 'X': - *optset |= PCRE_EXTRA; - continue; - - case 'U': - *optset |= PCRE_UNGREEDY; - continue; - - case '-': - optset = &unset; - continue; - - /* A termination by ')' indicates an options-setting-only item; if - this is at the very start of the pattern (indicated by item_count - being zero), we use it to set the global options. This is helpful - when analyzing the pattern for first characters, etc. Otherwise - nothing is done here and it is handled during the compiling - process. - - [Historical note: Up to Perl 5.8, options settings at top level - were always global settings, wherever they appeared in the pattern. - That is, they were equivalent to an external setting. From 5.8 - onwards, they apply only to what follows (which is what you might - expect).] */ - - case ')': - if (item_count == 0) - { - options = (options | set) & (~unset); - set = unset = 0; /* To save length */ - item_count--; /* To allow for several */ - } - - /* Fall through */ - - /* A termination by ':' indicates the start of a nested group with - the given options set. This is again handled at compile time, but - we must allow for compiled space if any of the ims options are - set. We also have to allow for resetting space at the end of - the group, which is why 4 is added to the length and not just 2. - If there are several changes of options within the same group, this - will lead to an over-estimate on the length, but this shouldn't - matter very much. We also have to allow for resetting options at - the start of any alternations, which we do by setting - branch_newextra to 2. Finally, we record whether the case-dependent - flag ever changes within the regex. This is used by the "required - character" code. */ - - case ':': - if (((set|unset) & PCRE_IMS) != 0) - { - length += 4; - branch_newextra = 2; - if (((set|unset) & PCRE_CASELESS) != 0) options |= PCRE_ICHANGED; - } - goto END_OPTIONS; - - /* Unrecognized option character */ - - default: - *errorptr = ERR12; - goto PCRE_ERROR_RETURN; - } - } - - /* If we hit a closing bracket, that's it - this is a freestanding - option-setting. We need to ensure that branch_extra is updated if - necessary. The only values branch_newextra can have here are 0 or 2. - If the value is 2, then branch_extra must either be 2 or 5, depending - on whether this is a lookbehind group or not. */ - - END_OPTIONS: - if (c == ')') - { - if (branch_newextra == 2 && - (branch_extra == 0 || branch_extra == 1+LINK_SIZE)) - branch_extra += branch_newextra; - continue; - } - - /* If options were terminated by ':' control comes here. Fall through - to handle the group below. */ - } - } - - /* Extracting brackets must be counted so we can process escapes in a - Perlish way. If the number exceeds EXTRACT_BASIC_MAX we are going to - need an additional 3 bytes of store per extracting bracket. However, if - PCRE_NO_AUTO)CAPTURE is set, unadorned brackets become non-capturing, so we - must leave the count alone (it will aways be zero). */ - - else if ((options & PCRE_NO_AUTO_CAPTURE) == 0) - { - bracount++; - if (bracount > EXTRACT_BASIC_MAX) bracket_length += 3; - } - - /* Save length for computing whole length at end if there's a repeat that - requires duplication of the group. Also save the current value of - branch_extra, and start the new group with the new value. If non-zero, this - will either be 2 for a (?imsx: group, or 3 for a lookbehind assertion. */ - - if (brastackptr >= sizeof(brastack)/sizeof(int)) - { - *errorptr = ERR19; - goto PCRE_ERROR_RETURN; - } - - bralenstack[brastackptr] = branch_extra; - branch_extra = branch_newextra; - - brastack[brastackptr++] = length; - length += bracket_length; - continue; - - /* Handle ket. Look for subsequent max/min; for certain sets of values we - have to replicate this bracket up to that many times. If brastackptr is - 0 this is an unmatched bracket which will generate an error, but take care - not to try to access brastack[-1] when computing the length and restoring - the branch_extra value. */ - - case ')': - length += 1 + LINK_SIZE; - if (brastackptr > 0) - { - duplength = length - brastack[--brastackptr]; - branch_extra = bralenstack[brastackptr]; - } - else duplength = 0; - - /* The following code is also used when a recursion such as (?3) is - followed by a quantifier, because in that case, it has to be wrapped inside - brackets so that the quantifier works. The value of duplength must be - set before arrival. */ - - HANDLE_QUANTIFIED_BRACKETS: - - /* Leave ptr at the final char; for read_repeat_counts this happens - automatically; for the others we need an increment. */ - - if ((c = ptr[1]) == '{' && is_counted_repeat(ptr+2)) - { - ptr = read_repeat_counts(ptr+2, &min, &max, errorptr); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - } - else if (c == '*') { min = 0; max = -1; ptr++; } - else if (c == '+') { min = 1; max = -1; ptr++; } - else if (c == '?') { min = 0; max = 1; ptr++; } - else { min = 1; max = 1; } - - /* If the minimum is zero, we have to allow for an OP_BRAZERO before the - group, and if the maximum is greater than zero, we have to replicate - maxval-1 times; each replication acquires an OP_BRAZERO plus a nesting - bracket set. */ - - if (min == 0) - { - length++; - if (max > 0) length += (max - 1) * (duplength + 3 + 2*LINK_SIZE); - } - - /* When the minimum is greater than zero, we have to replicate up to - minval-1 times, with no additions required in the copies. Then, if there - is a limited maximum we have to replicate up to maxval-1 times allowing - for a BRAZERO item before each optional copy and nesting brackets for all - but one of the optional copies. */ - - else - { - length += (min - 1) * duplength; - if (max > min) /* Need this test as max=-1 means no limit */ - length += (max - min) * (duplength + 3 + 2*LINK_SIZE) - - (2 + 2*LINK_SIZE); - } - - /* Allow space for once brackets for "possessive quantifier" */ - - if (ptr[1] == '+') - { - ptr++; - length += 2 + 2*LINK_SIZE; - } - continue; - - /* Non-special character. For a run of such characters the length required - is the number of characters + 2, except that the maximum run length is - MAXLIT. We won't get a skipped space or a non-data escape or the start of a - # comment as the first character, so the length can't be zero. */ - - NORMAL_CHAR: - default: - length += 2; - runlength = 0; - do - { -#ifdef SUPPORT_UTF8 - lastcharlength = 1; /* Need length of last char for UTF-8 repeats */ -#endif - - /* If in a \Q...\E sequence, check for end; otherwise it's a literal */ - if (inescq) - { - if (c == '\\' && ptr[1] == 'E') - { - inescq = FALSE; - ptr++; - } - else runlength++; - continue; - } - - /* Skip whitespace and comments for /x */ - - if ((options & PCRE_EXTENDED) != 0) - { - if ((compile_block.ctypes[c] & ctype_space) != 0) continue; - if (c == '#') - { - /* The space before the ; is to avoid a warning on a silly compiler - on the Macintosh. */ - while ((c = *(++ptr)) != 0 && c != NEWLINE) ; - continue; - } - } - - /* Backslash may introduce a data char or a metacharacter; stop the - string before the latter. */ - - if (c == '\\') - { - const uschar *saveptr = ptr; - c = check_escape(&ptr, errorptr, bracount, options, FALSE); - if (*errorptr != NULL) goto PCRE_ERROR_RETURN; - if (c < 0) { ptr = saveptr; break; } - - /* In UTF-8 mode, add on the number of additional bytes needed to - encode this character, and save the total length in case this is a - final char that is repeated. */ - -#ifdef SUPPORT_UTF8 - if (utf8 && c > 127) - { - int i; - for (i = 0; i < sizeof(utf8_table1)/sizeof(int); i++) - if (c <= utf8_table1[i]) break; - runlength += i; - lastcharlength += i; - } -#endif - } - - /* Ordinary character or single-char escape */ - - runlength++; - } - - /* This "while" is the end of the "do" above. */ - - while (runlength < MAXLIT && - (compile_block.ctypes[c = *(++ptr)] & ctype_meta) == 0); - - /* If we hit a meta-character, back off to point to it */ - - if (runlength < MAXLIT) ptr--; - - /* If the last char in the string is a UTF-8 multibyte character, we must - set lastcharlength correctly. If it was specified as an escape, this will - already have been done above. However, we also have to support in-line - UTF-8 characters, so check backwards from where we are. */ - -#ifdef SUPPORT_UTF8 - if (utf8) - { - const uschar *lastptr = ptr - 1; - if ((*lastptr & 0x80) != 0) - { - while((*lastptr & 0xc0) == 0x80) lastptr--; - lastcharlength = ptr - lastptr; - } - } -#endif - - length += runlength; - continue; - } - } - -length += 2 + LINK_SIZE; /* For final KET and END */ - -if (length > MAX_PATTERN_SIZE) - { - *errorptr = ERR20; - return NULL; - } - -/* Compute the size of data block needed and get it, either from malloc or -externally provided function. */ - -size = length + sizeof(real_pcre) + name_count * (max_name_size + 3); -re = (real_pcre *)(pcre_malloc)(size); - -if (re == NULL) - { - *errorptr = ERR21; - return NULL; - } - -/* Put in the magic number, and save the size, options, and table pointer */ - -re->magic_number = MAGIC_NUMBER; -re->size = size; -re->options = options; -re->tables = tables; -re->name_entry_size = max_name_size + 3; -re->name_count = name_count; - -/* The starting points of the name/number translation table and of the code are -passed around in the compile data block. */ - -compile_block.names_found = 0; -compile_block.name_entry_size = max_name_size + 3; -compile_block.name_table = (uschar *)re + sizeof(real_pcre); -codestart = compile_block.name_table + re->name_entry_size * re->name_count; -compile_block.start_code = codestart; -compile_block.req_varyopt = 0; - -/* Set up a starting, non-extracting bracket, then compile the expression. On -error, *errorptr will be set non-NULL, so we don't need to look at the result -of the function here. */ - -ptr = (const uschar *)pattern; -code = (uschar *)codestart; -*code = OP_BRA; -bracount = 0; -(void)compile_regex(options, options & PCRE_IMS, &bracount, &code, &ptr, - errorptr, FALSE, 0, &firstbyte, &reqbyte, NULL, &compile_block); -re->top_bracket = bracount; -re->top_backref = compile_block.top_backref; - -/* If not reached end of pattern on success, there's an excess bracket. */ - -if (*errorptr == NULL && *ptr != 0) *errorptr = ERR22; - -/* Fill in the terminating state and check for disastrous overflow, but -if debugging, leave the test till after things are printed out. */ - -*code++ = OP_END; - -#ifndef DEBUG -if (code - codestart > length) *errorptr = ERR23; -#endif - -/* Give an error if there's back reference to a non-existent capturing -subpattern. */ - -if (re->top_backref > re->top_bracket) *errorptr = ERR15; - -/* Failed to compile, or error while post-processing */ - -if (*errorptr != NULL) - { - (pcre_free)(re); - PCRE_ERROR_RETURN: - *erroroffset = ptr - (const uschar *)pattern; - return NULL; - } - -/* If the anchored option was not passed, set the flag if we can determine that -the pattern is anchored by virtue of ^ characters or \A or anything else (such -as starting with .* when DOTALL is set). - -Otherwise, if we know what the first character has to be, save it, because that -speeds up unanchored matches no end. If not, see if we can set the -PCRE_STARTLINE flag. This is helpful for multiline matches when all branches -start with ^. and also when all branches start with .* for non-DOTALL matches. -*/ - -if ((options & PCRE_ANCHORED) == 0) - { - int temp_options = options; - if (is_anchored(codestart, &temp_options, 0, compile_block.backref_map)) - re->options |= PCRE_ANCHORED; - else - { - if (firstbyte < 0) - firstbyte = find_firstassertedchar(codestart, &temp_options, FALSE); - if (firstbyte >= 0) /* Remove caseless flag for non-caseable chars */ - { - int ch = firstbyte & 255; - re->first_byte = ((firstbyte & REQ_CASELESS) != 0 && - compile_block.fcc[ch] == ch)? ch : firstbyte; - re->options |= PCRE_FIRSTSET; - } - else if (is_startline(codestart, 0, compile_block.backref_map)) - re->options |= PCRE_STARTLINE; - } - } - -/* For an anchored pattern, we use the "required byte" only if it follows a -variable length item in the regex. Remove the caseless flag for non-caseable -chars. */ - -if (reqbyte >= 0 && - ((re->options & PCRE_ANCHORED) == 0 || (reqbyte & REQ_VARY) != 0)) - { - int ch = reqbyte & 255; - re->req_byte = ((reqbyte & REQ_CASELESS) != 0 && - compile_block.fcc[ch] == ch)? (reqbyte & ~REQ_CASELESS) : reqbyte; - re->options |= PCRE_REQCHSET; - } - -/* Print out the compiled data for debugging */ - -#ifdef DEBUG - -printf("Length = %d top_bracket = %d top_backref = %d\n", - length, re->top_bracket, re->top_backref); - -if (re->options != 0) - { - printf("%s%s%s%s%s%s%s%s%s\n", - ((re->options & PCRE_ANCHORED) != 0)? "anchored " : "", - ((re->options & PCRE_CASELESS) != 0)? "caseless " : "", - ((re->options & PCRE_ICHANGED) != 0)? "case state changed " : "", - ((re->options & PCRE_EXTENDED) != 0)? "extended " : "", - ((re->options & PCRE_MULTILINE) != 0)? "multiline " : "", - ((re->options & PCRE_DOTALL) != 0)? "dotall " : "", - ((re->options & PCRE_DOLLAR_ENDONLY) != 0)? "endonly " : "", - ((re->options & PCRE_EXTRA) != 0)? "extra " : "", - ((re->options & PCRE_UNGREEDY) != 0)? "ungreedy " : ""); - } - -if ((re->options & PCRE_FIRSTSET) != 0) - { - int ch = re->first_byte & 255; - const char *caseless = ((re->first_byte & REQ_CASELESS) == 0)? "" : " (caseless)"; - if (isprint(ch)) printf("First char = %c%s\n", ch, caseless); - else printf("First char = \\x%02x%s\n", ch, caseless); - } - -if ((re->options & PCRE_REQCHSET) != 0) - { - int ch = re->req_byte & 255; - const char *caseless = ((re->req_byte & REQ_CASELESS) == 0)? "" : " (caseless)"; - if (isprint(ch)) printf("Req char = %c%s\n", ch, caseless); - else printf("Req char = \\x%02x%s\n", ch, caseless); - } - -print_internals(re, stdout); - -/* This check is done here in the debugging case so that the code that -was compiled can be seen. */ - -if (code - codestart > length) - { - *errorptr = ERR23; - (pcre_free)(re); - *erroroffset = ptr - (uschar *)pattern; - return NULL; - } -#endif - -return (pcre *)re; -} - - - -/************************************************* -* Match a back-reference * -*************************************************/ - -/* If a back reference hasn't been set, the length that is passed is greater -than the number of characters left in the string, so the match fails. - -Arguments: - offset index into the offset vector - eptr points into the subject - length length to be matched - md points to match data block - ims the ims flags - -Returns: TRUE if matched -*/ - -static BOOL -match_ref(int offset, register const uschar *eptr, int length, match_data *md, - unsigned long int ims) -{ -const uschar *p = md->start_subject + md->offset_vector[offset]; - -#ifdef DEBUG -if (eptr >= md->end_subject) - printf("matching subject "); -else - { - printf("matching subject "); - pchars(eptr, length, TRUE, md); - } -printf(" against backref "); -pchars(p, length, FALSE, md); -printf("\n"); -#endif - -/* Always fail if not enough characters left */ - -if (length > md->end_subject - eptr) return FALSE; - -/* Separate the caselesss case for speed */ - -if ((ims & PCRE_CASELESS) != 0) - { - while (length-- > 0) - if (md->lcc[*p++] != md->lcc[*eptr++]) return FALSE; - } -else - { while (length-- > 0) if (*p++ != *eptr++) return FALSE; } - -return TRUE; -} - - -#ifdef SUPPORT_UTF8 -/************************************************* -* Match character against an XCLASS * -*************************************************/ - -/* This function is called from within the XCLASS code below, to match a -character against an extended class which might match values > 255. - -Arguments: - c the character - data points to the flag byte of the XCLASS data - -Returns: TRUE if character matches, else FALSE -*/ - -static BOOL -match_xclass(int c, const uschar *data) -{ -int t; -BOOL negated = (*data & XCL_NOT) != 0; - -/* Character values < 256 are matched against a bitmap, if one is present. If -not, we still carry on, because there may be ranges that start below 256 in the -additional data. */ - -if (c < 256) - { - if ((*data & XCL_MAP) != 0 && (data[1 + c/8] & (1 << (c&7))) != 0) - return !negated; /* char found */ - } - -/* Now match against the list of large chars or ranges that end with a large -char. First skip the bit map if present. */ - -if ((*data++ & XCL_MAP) != 0) data += 32; - -while ((t = *data++) != XCL_END) - { - int x, y; - GETCHARINC(x, data); - if (t == XCL_SINGLE) - { - if (c == x) return !negated; - } - else - { - GETCHARINC(y, data); - if (c >= x && c <= y) return !negated; - } - } - -return negated; /* char was not found */ -} -#endif - - -/*************************************************************************** -**************************************************************************** - RECURSION IN THE match() FUNCTION - -The match() function is highly recursive. Some regular expressions can cause -it to recurse thousands of times. I was writing for Unix, so I just let it -call itself recursively. This uses the stack for saving everything that has -to be saved for a recursive call. On Unix, the stack can be large, and this -works fine. - -It turns out that on non-Unix systems there are problems with programs that -use a lot of stack. (This despite the fact that every last chip has oodles -of memory these days, and techniques for extending the stack have been known -for decades.) So.... - -There is a fudge, triggered by defining NO_RECURSE, which avoids recursive -calls by keeping local variables that need to be preserved in blocks of memory -obtained from malloc instead instead of on the stack. Macros are used to -achieve this so that the actual code doesn't look very different to what it -always used to. -**************************************************************************** -***************************************************************************/ - - -/* These versions of the macros use the stack, as normal */ - -#ifndef NO_RECURSE -#define REGISTER register -#define RMATCH(rx,ra,rb,rc,rd,re,rf,rg) rx = match(ra,rb,rc,rd,re,rf,rg) -#define RRETURN(ra) return ra -#else - - -/* These versions of the macros manage a private stack on the heap. Note -that the rd argument of RMATCH isn't actually used. It's the md argument of -match(), which never actually changes. */ - -#define REGISTER - -#define RMATCH(rx,ra,rb,rc,rd,re,rf,rg)\ - {\ - heapframe *newframe = (pcre_stack_malloc)(sizeof(heapframe));\ - if (setjmp(frame->Xwhere) == 0)\ - {\ - newframe->Xeptr = ra;\ - newframe->Xecode = rb;\ - newframe->Xoffset_top = rc;\ - newframe->Xims = re;\ - newframe->Xeptrb = rf;\ - newframe->Xflags = rg;\ - newframe->Xprevframe = frame;\ - frame = newframe;\ - DPRINTF(("restarting from line %d\n", __LINE__));\ - goto HEAP_RECURSE;\ - }\ - else\ - {\ - DPRINTF(("longjumped back to line %d\n", __LINE__));\ - frame = md->thisframe;\ - rx = frame->Xresult;\ - }\ - } - -#define RRETURN(ra)\ - {\ - heapframe *newframe = frame;\ - frame = newframe->Xprevframe;\ - (pcre_stack_free)(newframe);\ - if (frame != NULL)\ - {\ - frame->Xresult = ra;\ - md->thisframe = frame;\ - longjmp(frame->Xwhere, 1);\ - }\ - return ra;\ - } - - -/* Structure for remembering the local variables in a private frame */ - -typedef struct heapframe { - struct heapframe *Xprevframe; - - /* Function arguments that may change */ - - const uschar *Xeptr; - const uschar *Xecode; - int Xoffset_top; - long int Xims; - eptrblock *Xeptrb; - int Xflags; - - /* Function local variables */ - - const uschar *Xcallpat; - const uschar *Xcharptr; - const uschar *Xdata; - const uschar *Xlastptr; - const uschar *Xnext; - const uschar *Xpp; - const uschar *Xprev; - const uschar *Xsaved_eptr; - - recursion_info Xnew_recursive; - - BOOL Xcur_is_word; - BOOL Xcondition; - BOOL Xminimize; - BOOL Xprev_is_word; - - unsigned long int Xoriginal_ims; - - int Xctype; - int Xfc; - int Xfi; - int Xlength; - int Xmax; - int Xmin; - int Xnumber; - int Xoffset; - int Xop; - int Xsave_capture_last; - int Xsave_offset1, Xsave_offset2, Xsave_offset3; - int Xstacksave[REC_STACK_SAVE_MAX]; - - eptrblock Xnewptrb; - - /* Place to pass back result, and where to jump back to */ - - int Xresult; - jmp_buf Xwhere; - -} heapframe; - -#endif - - -/*************************************************************************** -***************************************************************************/ - - - -/************************************************* -* Match from current position * -*************************************************/ - -/* On entry ecode points to the first opcode, and eptr to the first character -in the subject string, while eptrb holds the value of eptr at the start of the -last bracketed group - used for breaking infinite loops matching zero-length -strings. This function is called recursively in many circumstances. Whenever it -returns a negative (error) response, the outer incarnation must also return the -same response. - -Performance note: It might be tempting to extract commonly used fields from the -md structure (e.g. utf8, end_subject) into individual variables to improve -performance. Tests using gcc on a SPARC disproved this; in the first case, it -made performance worse. - -Arguments: - eptr pointer in subject - ecode position in code - offset_top current top pointer - md pointer to "static" info for the match - ims current /i, /m, and /s options - eptrb pointer to chain of blocks containing eptr at start of - brackets - for testing for empty matches - flags can contain - match_condassert - this is an assertion condition - match_isgroup - this is the start of a bracketed group - -Returns: MATCH_MATCH if matched ) these values are >= 0 - MATCH_NOMATCH if failed to match ) - a negative PCRE_ERROR_xxx value if aborted by an error condition - (e.g. stopped by recursion limit) -*/ - -static int -match(REGISTER const uschar *eptr, REGISTER const uschar *ecode, - int offset_top, match_data *md, unsigned long int ims, eptrblock *eptrb, - int flags) -{ -/* These variables do not need to be preserved over recursion in this function, -so they can be ordinary variables in all cases. Mark them with "register" -because they are used a lot in loops. */ - -register int rrc; /* Returns from recursive calls */ -register int i; /* Used for loops not involving calls to RMATCH() */ -register int c; /* Character values not kept over RMATCH() calls */ - -/* When recursion is not being used, all "local" variables that have to be -preserved over calls to RMATCH() are part of a "frame" which is obtained from -heap storage. Set up the top-level frame here; others are obtained from the -heap whenever RMATCH() does a "recursion". See the macro definitions above. */ - -#ifdef NO_RECURSE -heapframe *frame = (pcre_stack_malloc)(sizeof(heapframe)); -frame->Xprevframe = NULL; /* Marks the top level */ - -/* Copy in the original argument variables */ - -frame->Xeptr = eptr; -frame->Xecode = ecode; -frame->Xoffset_top = offset_top; -frame->Xims = ims; -frame->Xeptrb = eptrb; -frame->Xflags = flags; - -/* This is where control jumps back to to effect "recursion" */ - -HEAP_RECURSE: - -/* Macros make the argument variables come from the current frame */ - -#define eptr frame->Xeptr -#define ecode frame->Xecode -#define offset_top frame->Xoffset_top -#define ims frame->Xims -#define eptrb frame->Xeptrb -#define flags frame->Xflags - -/* Ditto for the local variables */ - -#define callpat frame->Xcallpat -#define charptr frame->Xcharptr -#define data frame->Xdata -#define lastptr frame->Xlastptr -#define next frame->Xnext -#define pp frame->Xpp -#define prev frame->Xprev -#define saved_eptr frame->Xsaved_eptr - -#define new_recursive frame->Xnew_recursive - -#define cur_is_word frame->Xcur_is_word -#define condition frame->Xcondition -#define minimize frame->Xminimize -#define prev_is_word frame->Xprev_is_word - -#define original_ims frame->Xoriginal_ims - -#define ctype frame->Xctype -#define fc frame->Xfc -#define fi frame->Xfi -#define length frame->Xlength -#define max frame->Xmax -#define min frame->Xmin -#define number frame->Xnumber -#define offset frame->Xoffset -#define op frame->Xop -#define save_capture_last frame->Xsave_capture_last -#define save_offset1 frame->Xsave_offset1 -#define save_offset2 frame->Xsave_offset2 -#define save_offset3 frame->Xsave_offset3 -#define stacksave frame->Xstacksave - -#define newptrb frame->Xnewptrb - -/* When recursion is being used, local variables are allocated on the stack and -get preserved during recursion in the normal way. In this environment, fi and -i, and fc and c, can be the same variables. */ - -#else -#define fi i -#define fc c - -const uschar *callpat; /* Many of these variables are used ony */ -const uschar *charptr; /* small blocks of the code. My normal */ -const uschar *data; /* style of coding would have declared */ -const uschar *lastptr; /* them within each of those blocks. */ -const uschar *next; /* However, in order to accommodate the */ -const uschar *pp; /* version of this code that uses an */ -const uschar *prev; /* external "stack" implemented on the */ -const uschar *saved_eptr; /* heap, it is easier to declare them */ - /* all here, so the declarations can */ -recursion_info new_recursive; /* be cut out in a block. The only */ - /* declarations within blocks below are */ -BOOL cur_is_word; /* for variables that do not have to */ -BOOL condition; /* be preserved over a recursive call */ -BOOL minimize; /* to RMATCH(). */ -BOOL prev_is_word; - -unsigned long int original_ims; - -int ctype; -int length; -int max; -int min; -int number; -int offset; -int op; -int save_capture_last; -int save_offset1, save_offset2, save_offset3; -int stacksave[REC_STACK_SAVE_MAX]; - -eptrblock newptrb; -#endif - - -/* OK, now we can get on with the real code of the function. Recursion is -specified by the macros RMATCH and RRETURN. When NO_RECURSE is *not* defined, -these just turn into a recursive call to match() and a "return", respectively. -However, RMATCH isn't like a function call because it's quite a complicated -macro. It has to be used in one particular way. This shouldn't, however, impact -performance when true recursion is being used. */ - -if (md->match_call_count++ >= md->match_limit) RRETURN(PCRE_ERROR_MATCHLIMIT); - -original_ims = ims; /* Save for resetting on ')' */ - -/* At the start of a bracketed group, add the current subject pointer to the -stack of such pointers, to be re-instated at the end of the group when we hit -the closing ket. When match() is called in other circumstances, we don't add to -this stack. */ - -if ((flags & match_isgroup) != 0) - { - newptrb.epb_prev = eptrb; - newptrb.epb_saved_eptr = eptr; - eptrb = &newptrb; - } - -/* Now start processing the operations. */ - -for (;;) - { - op = *ecode; - minimize = FALSE; - - /* Opening capturing bracket. If there is space in the offset vector, save - the current subject position in the working slot at the top of the vector. We - mustn't change the current values of the data slot, because they may be set - from a previous iteration of this group, and be referred to by a reference - inside the group. - - If the bracket fails to match, we need to restore this value and also the - values of the final offsets, in case they were set by a previous iteration of - the same bracket. - - If there isn't enough space in the offset vector, treat this as if it were a - non-capturing bracket. Don't worry about setting the flag for the error case - here; that is handled in the code for KET. */ - - if (op > OP_BRA) - { - number = op - OP_BRA; - - /* For extended extraction brackets (large number), we have to fish out the - number from a dummy opcode at the start. */ - - if (number > EXTRACT_BASIC_MAX) - number = GET2(ecode, 2+LINK_SIZE); - offset = number << 1; - -#ifdef DEBUG - printf("start bracket %d subject=", number); - pchars(eptr, 16, TRUE, md); - printf("\n"); -#endif - - if (offset < md->offset_max) - { - save_offset1 = md->offset_vector[offset]; - save_offset2 = md->offset_vector[offset+1]; - save_offset3 = md->offset_vector[md->offset_end - number]; - save_capture_last = md->capture_last; - - DPRINTF(("saving %d %d %d\n", save_offset1, save_offset2, save_offset3)); - md->offset_vector[md->offset_end - number] = eptr - md->start_subject; - - do - { - RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, - match_isgroup); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - md->capture_last = save_capture_last; - ecode += GET(ecode, 1); - } - while (*ecode == OP_ALT); - - DPRINTF(("bracket %d failed\n", number)); - - md->offset_vector[offset] = save_offset1; - md->offset_vector[offset+1] = save_offset2; - md->offset_vector[md->offset_end - number] = save_offset3; - - RRETURN(MATCH_NOMATCH); - } - - /* Insufficient room for saving captured contents */ - - else op = OP_BRA; - } - - /* Other types of node can be handled by a switch */ - - switch(op) - { - case OP_BRA: /* Non-capturing bracket: optimized */ - DPRINTF(("start bracket 0\n")); - do - { - RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, - match_isgroup); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - ecode += GET(ecode, 1); - } - while (*ecode == OP_ALT); - DPRINTF(("bracket 0 failed\n")); - RRETURN(MATCH_NOMATCH); - - /* Conditional group: compilation checked that there are no more than - two branches. If the condition is false, skipping the first branch takes us - past the end if there is only one branch, but that's OK because that is - exactly what going to the ket would do. */ - - case OP_COND: - if (ecode[LINK_SIZE+1] == OP_CREF) /* Condition extract or recurse test */ - { - offset = GET2(ecode, LINK_SIZE+2) << 1; /* Doubled ref number */ - condition = (offset == CREF_RECURSE * 2)? - (md->recursive != NULL) : - (offset < offset_top && md->offset_vector[offset] >= 0); - RMATCH(rrc, eptr, ecode + (condition? - (LINK_SIZE + 4) : (LINK_SIZE + 1 + GET(ecode, 1))), - offset_top, md, ims, eptrb, match_isgroup); - RRETURN(rrc); - } - - /* The condition is an assertion. Call match() to evaluate it - setting - the final argument TRUE causes it to stop at the end of an assertion. */ - - else - { - RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL, - match_condassert | match_isgroup); - if (rrc == MATCH_MATCH) - { - ecode += 1 + LINK_SIZE + GET(ecode, LINK_SIZE+2); - while (*ecode == OP_ALT) ecode += GET(ecode, 1); - } - else if (rrc != MATCH_NOMATCH) - { - RRETURN(rrc); /* Need braces because of following else */ - } - else ecode += GET(ecode, 1); - RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, - match_isgroup); - RRETURN(rrc); - } - /* Control never reaches here */ - - /* Skip over conditional reference or large extraction number data if - encountered. */ - - case OP_CREF: - case OP_BRANUMBER: - ecode += 3; - break; - - /* End of the pattern. If we are in a recursion, we should restore the - offsets appropriately and continue from after the call. */ - - case OP_END: - if (md->recursive != NULL && md->recursive->group_num == 0) - { - recursion_info *rec = md->recursive; - DPRINTF(("Hit the end in a (?0) recursion\n")); - md->recursive = rec->prevrec; - memmove(md->offset_vector, rec->offset_save, - rec->saved_max * sizeof(int)); - md->start_match = rec->save_start; - ims = original_ims; - ecode = rec->after_call; - break; - } - - /* Otherwise, if PCRE_NOTEMPTY is set, fail if we have matched an empty - string - backtracking will then try other alternatives, if any. */ - - if (md->notempty && eptr == md->start_match) RRETURN(MATCH_NOMATCH); - md->end_match_ptr = eptr; /* Record where we ended */ - md->end_offset_top = offset_top; /* and how many extracts were taken */ - RRETURN(MATCH_MATCH); - - /* Change option settings */ - - case OP_OPT: - ims = ecode[1]; - ecode += 2; - DPRINTF(("ims set to %02lx\n", ims)); - break; - - /* Assertion brackets. Check the alternative branches in turn - the - matching won't pass the KET for an assertion. If any one branch matches, - the assertion is true. Lookbehind assertions have an OP_REVERSE item at the - start of each branch to move the current point backwards, so the code at - this level is identical to the lookahead case. */ - - case OP_ASSERT: - case OP_ASSERTBACK: - do - { - RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL, - match_isgroup); - if (rrc == MATCH_MATCH) break; - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - ecode += GET(ecode, 1); - } - while (*ecode == OP_ALT); - if (*ecode == OP_KET) RRETURN(MATCH_NOMATCH); - - /* If checking an assertion for a condition, return MATCH_MATCH. */ - - if ((flags & match_condassert) != 0) RRETURN(MATCH_MATCH); - - /* Continue from after the assertion, updating the offsets high water - mark, since extracts may have been taken during the assertion. */ - - do ecode += GET(ecode,1); while (*ecode == OP_ALT); - ecode += 1 + LINK_SIZE; - offset_top = md->end_offset_top; - continue; - - /* Negative assertion: all branches must fail to match */ - - case OP_ASSERT_NOT: - case OP_ASSERTBACK_NOT: - do - { - RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, NULL, - match_isgroup); - if (rrc == MATCH_MATCH) RRETURN(MATCH_NOMATCH); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - ecode += GET(ecode,1); - } - while (*ecode == OP_ALT); - - if ((flags & match_condassert) != 0) RRETURN(MATCH_MATCH); - - ecode += 1 + LINK_SIZE; - continue; - - /* Move the subject pointer back. This occurs only at the start of - each branch of a lookbehind assertion. If we are too close to the start to - move back, this match function fails. When working with UTF-8 we move - back a number of characters, not bytes. */ - - case OP_REVERSE: -#ifdef SUPPORT_UTF8 - if (md->utf8) - { - c = GET(ecode,1); - for (i = 0; i < c; i++) - { - eptr--; - if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH); - BACKCHAR(eptr) - } - } - else -#endif - - /* No UTF-8 support, or not in UTF-8 mode: count is byte count */ - - { - eptr -= GET(ecode,1); - if (eptr < md->start_subject) RRETURN(MATCH_NOMATCH); - } - - /* Skip to next op code */ - - ecode += 1 + LINK_SIZE; - break; - - /* The callout item calls an external function, if one is provided, passing - details of the match so far. This is mainly for debugging, though the - function is able to force a failure. */ - - case OP_CALLOUT: - if (pcre_callout != NULL) - { - pcre_callout_block cb; - cb.version = 0; /* Version 0 of the callout block */ - cb.callout_number = ecode[1]; - cb.offset_vector = md->offset_vector; - cb.subject = (const char *)md->start_subject; - cb.subject_length = md->end_subject - md->start_subject; - cb.start_match = md->start_match - md->start_subject; - cb.current_position = eptr - md->start_subject; - cb.capture_top = offset_top/2; - cb.capture_last = md->capture_last; - cb.callout_data = md->callout_data; - if ((rrc = (*pcre_callout)(&cb)) > 0) RRETURN(MATCH_NOMATCH); - if (rrc < 0) RRETURN(rrc); - } - ecode += 2; - break; - - /* Recursion either matches the current regex, or some subexpression. The - offset data is the offset to the starting bracket from the start of the - whole pattern. (This is so that it works from duplicated subpatterns.) - - If there are any capturing brackets started but not finished, we have to - save their starting points and reinstate them after the recursion. However, - we don't know how many such there are (offset_top records the completed - total) so we just have to save all the potential data. There may be up to - 65535 such values, which is too large to put on the stack, but using malloc - for small numbers seems expensive. As a compromise, the stack is used when - there are no more than REC_STACK_SAVE_MAX values to store; otherwise malloc - is used. A problem is what to do if the malloc fails ... there is no way of - returning to the top level with an error. Save the top REC_STACK_SAVE_MAX - values on the stack, and accept that the rest may be wrong. - - There are also other values that have to be saved. We use a chained - sequence of blocks that actually live on the stack. Thanks to Robin Houston - for the original version of this logic. */ - - case OP_RECURSE: - { - callpat = md->start_code + GET(ecode, 1); - new_recursive.group_num = *callpat - OP_BRA; - - /* For extended extraction brackets (large number), we have to fish out - the number from a dummy opcode at the start. */ - - if (new_recursive.group_num > EXTRACT_BASIC_MAX) - new_recursive.group_num = GET2(callpat, 2+LINK_SIZE); - - /* Add to "recursing stack" */ - - new_recursive.prevrec = md->recursive; - md->recursive = &new_recursive; - - /* Find where to continue from afterwards */ - - ecode += 1 + LINK_SIZE; - new_recursive.after_call = ecode; - - /* Now save the offset data. */ - - new_recursive.saved_max = md->offset_end; - if (new_recursive.saved_max <= REC_STACK_SAVE_MAX) - new_recursive.offset_save = stacksave; - else - { - new_recursive.offset_save = - (int *)(pcre_malloc)(new_recursive.saved_max * sizeof(int)); - if (new_recursive.offset_save == NULL) RRETURN(PCRE_ERROR_NOMEMORY); - } - - memcpy(new_recursive.offset_save, md->offset_vector, - new_recursive.saved_max * sizeof(int)); - new_recursive.save_start = md->start_match; - md->start_match = eptr; - - /* OK, now we can do the recursion. For each top-level alternative we - restore the offset and recursion data. */ - - DPRINTF(("Recursing into group %d\n", new_recursive.group_num)); - do - { - RMATCH(rrc, eptr, callpat + 1 + LINK_SIZE, offset_top, md, ims, - eptrb, match_isgroup); - if (rrc == MATCH_MATCH) - { - md->recursive = new_recursive.prevrec; - if (new_recursive.offset_save != stacksave) - (pcre_free)(new_recursive.offset_save); - RRETURN(MATCH_MATCH); - } - else if (rrc != MATCH_NOMATCH) RRETURN(rrc); - - md->recursive = &new_recursive; - memcpy(md->offset_vector, new_recursive.offset_save, - new_recursive.saved_max * sizeof(int)); - callpat += GET(callpat, 1); - } - while (*callpat == OP_ALT); - - DPRINTF(("Recursion didn't match\n")); - md->recursive = new_recursive.prevrec; - if (new_recursive.offset_save != stacksave) - (pcre_free)(new_recursive.offset_save); - RRETURN(MATCH_NOMATCH); - } - /* Control never reaches here */ - - /* "Once" brackets are like assertion brackets except that after a match, - the point in the subject string is not moved back. Thus there can never be - a move back into the brackets. Friedl calls these "atomic" subpatterns. - Check the alternative branches in turn - the matching won't pass the KET - for this kind of subpattern. If any one branch matches, we carry on as at - the end of a normal bracket, leaving the subject pointer. */ - - case OP_ONCE: - { - prev = ecode; - saved_eptr = eptr; - - do - { - RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, - eptrb, match_isgroup); - if (rrc == MATCH_MATCH) break; - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - ecode += GET(ecode,1); - } - while (*ecode == OP_ALT); - - /* If hit the end of the group (which could be repeated), fail */ - - if (*ecode != OP_ONCE && *ecode != OP_ALT) RRETURN(MATCH_NOMATCH); - - /* Continue as from after the assertion, updating the offsets high water - mark, since extracts may have been taken. */ - - do ecode += GET(ecode,1); while (*ecode == OP_ALT); - - offset_top = md->end_offset_top; - eptr = md->end_match_ptr; - - /* For a non-repeating ket, just continue at this level. This also - happens for a repeating ket if no characters were matched in the group. - This is the forcible breaking of infinite loops as implemented in Perl - 5.005. If there is an options reset, it will get obeyed in the normal - course of events. */ - - if (*ecode == OP_KET || eptr == saved_eptr) - { - ecode += 1+LINK_SIZE; - break; - } - - /* The repeating kets try the rest of the pattern or restart from the - preceding bracket, in the appropriate order. We need to reset any options - that changed within the bracket before re-running it, so check the next - opcode. */ - - if (ecode[1+LINK_SIZE] == OP_OPT) - { - ims = (ims & ~PCRE_IMS) | ecode[4]; - DPRINTF(("ims set to %02lx at group repeat\n", ims)); - } - - if (*ecode == OP_KETRMIN) - { - RMATCH(rrc, eptr, ecode + 1 + LINK_SIZE, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - RMATCH(rrc, eptr, prev, offset_top, md, ims, eptrb, match_isgroup); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - } - else /* OP_KETRMAX */ - { - RMATCH(rrc, eptr, prev, offset_top, md, ims, eptrb, match_isgroup); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - RMATCH(rrc, eptr, ecode + 1+LINK_SIZE, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - } - } - RRETURN(MATCH_NOMATCH); - - /* An alternation is the end of a branch; scan along to find the end of the - bracketed group and go to there. */ - - case OP_ALT: - do ecode += GET(ecode,1); while (*ecode == OP_ALT); - break; - - /* BRAZERO and BRAMINZERO occur just before a bracket group, indicating - that it may occur zero times. It may repeat infinitely, or not at all - - i.e. it could be ()* or ()? in the pattern. Brackets with fixed upper - repeat limits are compiled as a number of copies, with the optional ones - preceded by BRAZERO or BRAMINZERO. */ - - case OP_BRAZERO: - { - next = ecode+1; - RMATCH(rrc, eptr, next, offset_top, md, ims, eptrb, match_isgroup); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - do next += GET(next,1); while (*next == OP_ALT); - ecode = next + 1+LINK_SIZE; - } - break; - - case OP_BRAMINZERO: - { - next = ecode+1; - do next += GET(next,1); while (*next == OP_ALT); - RMATCH(rrc, eptr, next + 1+LINK_SIZE, offset_top, md, ims, eptrb, - match_isgroup); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - ecode++; - } - break; - - /* End of a group, repeated or non-repeating. If we are at the end of - an assertion "group", stop matching and return MATCH_MATCH, but record the - current high water mark for use by positive assertions. Do this also - for the "once" (not-backup up) groups. */ - - case OP_KET: - case OP_KETRMIN: - case OP_KETRMAX: - { - prev = ecode - GET(ecode, 1); - saved_eptr = eptrb->epb_saved_eptr; - - /* Back up the stack of bracket start pointers. */ - - eptrb = eptrb->epb_prev; - - if (*prev == OP_ASSERT || *prev == OP_ASSERT_NOT || - *prev == OP_ASSERTBACK || *prev == OP_ASSERTBACK_NOT || - *prev == OP_ONCE) - { - md->end_match_ptr = eptr; /* For ONCE */ - md->end_offset_top = offset_top; - RRETURN(MATCH_MATCH); - } - - /* In all other cases except a conditional group we have to check the - group number back at the start and if necessary complete handling an - extraction by setting the offsets and bumping the high water mark. */ - - if (*prev != OP_COND) - { - number = *prev - OP_BRA; - - /* For extended extraction brackets (large number), we have to fish out - the number from a dummy opcode at the start. */ - - if (number > EXTRACT_BASIC_MAX) number = GET2(prev, 2+LINK_SIZE); - offset = number << 1; - -#ifdef DEBUG - printf("end bracket %d", number); - printf("\n"); -#endif - - /* Test for a numbered group. This includes groups called as a result - of recursion. Note that whole-pattern recursion is coded as a recurse - into group 0, so it won't be picked up here. Instead, we catch it when - the OP_END is reached. */ - - if (number > 0) - { - md->capture_last = number; - if (offset >= md->offset_max) md->offset_overflow = TRUE; else - { - md->offset_vector[offset] = - md->offset_vector[md->offset_end - number]; - md->offset_vector[offset+1] = eptr - md->start_subject; - if (offset_top <= offset) offset_top = offset + 2; - } - - /* Handle a recursively called group. Restore the offsets - appropriately and continue from after the call. */ - - if (md->recursive != NULL && md->recursive->group_num == number) - { - recursion_info *rec = md->recursive; - DPRINTF(("Recursion (%d) succeeded - continuing\n", number)); - md->recursive = rec->prevrec; - md->start_match = rec->save_start; - memcpy(md->offset_vector, rec->offset_save, - rec->saved_max * sizeof(int)); - ecode = rec->after_call; - ims = original_ims; - break; - } - } - } - - /* Reset the value of the ims flags, in case they got changed during - the group. */ - - ims = original_ims; - DPRINTF(("ims reset to %02lx\n", ims)); - - /* For a non-repeating ket, just continue at this level. This also - happens for a repeating ket if no characters were matched in the group. - This is the forcible breaking of infinite loops as implemented in Perl - 5.005. If there is an options reset, it will get obeyed in the normal - course of events. */ - - if (*ecode == OP_KET || eptr == saved_eptr) - { - ecode += 1 + LINK_SIZE; - break; - } - - /* The repeating kets try the rest of the pattern or restart from the - preceding bracket, in the appropriate order. */ - - if (*ecode == OP_KETRMIN) - { - RMATCH(rrc, eptr, ecode + 1+LINK_SIZE, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - RMATCH(rrc, eptr, prev, offset_top, md, ims, eptrb, match_isgroup); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - } - else /* OP_KETRMAX */ - { - RMATCH(rrc, eptr, prev, offset_top, md, ims, eptrb, match_isgroup); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - RMATCH(rrc, eptr, ecode + 1+LINK_SIZE, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - } - } - - RRETURN(MATCH_NOMATCH); - - /* Start of subject unless notbol, or after internal newline if multiline */ - - case OP_CIRC: - if (md->notbol && eptr == md->start_subject) RRETURN(MATCH_NOMATCH); - if ((ims & PCRE_MULTILINE) != 0) - { - if (eptr != md->start_subject && eptr[-1] != NEWLINE) - RRETURN(MATCH_NOMATCH); - ecode++; - break; - } - /* ... else fall through */ - - /* Start of subject assertion */ - - case OP_SOD: - if (eptr != md->start_subject) RRETURN(MATCH_NOMATCH); - ecode++; - break; - - /* Start of match assertion */ - - case OP_SOM: - if (eptr != md->start_subject + md->start_offset) RRETURN(MATCH_NOMATCH); - ecode++; - break; - - /* Assert before internal newline if multiline, or before a terminating - newline unless endonly is set, else end of subject unless noteol is set. */ - - case OP_DOLL: - if ((ims & PCRE_MULTILINE) != 0) - { - if (eptr < md->end_subject) - { if (*eptr != NEWLINE) RRETURN(MATCH_NOMATCH); } - else - { if (md->noteol) RRETURN(MATCH_NOMATCH); } - ecode++; - break; - } - else - { - if (md->noteol) RRETURN(MATCH_NOMATCH); - if (!md->endonly) - { - if (eptr < md->end_subject - 1 || - (eptr == md->end_subject - 1 && *eptr != NEWLINE)) - RRETURN(MATCH_NOMATCH); - ecode++; - break; - } - } - /* ... else fall through */ - - /* End of subject assertion (\z) */ - - case OP_EOD: - if (eptr < md->end_subject) RRETURN(MATCH_NOMATCH); - ecode++; - break; - - /* End of subject or ending \n assertion (\Z) */ - - case OP_EODN: - if (eptr < md->end_subject - 1 || - (eptr == md->end_subject - 1 && *eptr != NEWLINE)) RRETURN(MATCH_NOMATCH); - ecode++; - break; - - /* Word boundary assertions */ - - case OP_NOT_WORD_BOUNDARY: - case OP_WORD_BOUNDARY: - { - - /* Find out if the previous and current characters are "word" characters. - It takes a bit more work in UTF-8 mode. Characters > 255 are assumed to - be "non-word" characters. */ - -#ifdef SUPPORT_UTF8 - if (md->utf8) - { - if (eptr == md->start_subject) prev_is_word = FALSE; else - { - lastptr = eptr - 1; - while((*lastptr & 0xc0) == 0x80) lastptr--; - GETCHAR(c, lastptr); - prev_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0; - } - if (eptr >= md->end_subject) cur_is_word = FALSE; else - { - GETCHAR(c, eptr); - cur_is_word = c < 256 && (md->ctypes[c] & ctype_word) != 0; - } - } - else -#endif - - /* More streamlined when not in UTF-8 mode */ - - { - prev_is_word = (eptr != md->start_subject) && - ((md->ctypes[eptr[-1]] & ctype_word) != 0); - cur_is_word = (eptr < md->end_subject) && - ((md->ctypes[*eptr] & ctype_word) != 0); - } - - /* Now see if the situation is what we want */ - - if ((*ecode++ == OP_WORD_BOUNDARY)? - cur_is_word == prev_is_word : cur_is_word != prev_is_word) - RRETURN(MATCH_NOMATCH); - } - break; - - /* Match a single character type; inline for speed */ - - case OP_ANY: - if ((ims & PCRE_DOTALL) == 0 && eptr < md->end_subject && *eptr == NEWLINE) - RRETURN(MATCH_NOMATCH); - if (eptr++ >= md->end_subject) RRETURN(MATCH_NOMATCH); -#ifdef SUPPORT_UTF8 - if (md->utf8) - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; -#endif - ecode++; - break; - - /* Match a single byte, even in UTF-8 mode. This opcode really does match - any byte, even newline, independent of the setting of PCRE_DOTALL. */ - - case OP_ANYBYTE: - if (eptr++ >= md->end_subject) RRETURN(MATCH_NOMATCH); - ecode++; - break; - - case OP_NOT_DIGIT: - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINCTEST(c, eptr); - if ( -#ifdef SUPPORT_UTF8 - c < 256 && -#endif - (md->ctypes[c] & ctype_digit) != 0 - ) - RRETURN(MATCH_NOMATCH); - ecode++; - break; - - case OP_DIGIT: - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINCTEST(c, eptr); - if ( -#ifdef SUPPORT_UTF8 - c >= 256 || -#endif - (md->ctypes[c] & ctype_digit) == 0 - ) - RRETURN(MATCH_NOMATCH); - ecode++; - break; - - case OP_NOT_WHITESPACE: - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINCTEST(c, eptr); - if ( -#ifdef SUPPORT_UTF8 - c < 256 && -#endif - (md->ctypes[c] & ctype_space) != 0 - ) - RRETURN(MATCH_NOMATCH); - ecode++; - break; - - case OP_WHITESPACE: - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINCTEST(c, eptr); - if ( -#ifdef SUPPORT_UTF8 - c >= 256 || -#endif - (md->ctypes[c] & ctype_space) == 0 - ) - RRETURN(MATCH_NOMATCH); - ecode++; - break; - - case OP_NOT_WORDCHAR: - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINCTEST(c, eptr); - if ( -#ifdef SUPPORT_UTF8 - c < 256 && -#endif - (md->ctypes[c] & ctype_word) != 0 - ) - RRETURN(MATCH_NOMATCH); - ecode++; - break; - - case OP_WORDCHAR: - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINCTEST(c, eptr); - if ( -#ifdef SUPPORT_UTF8 - c >= 256 || -#endif - (md->ctypes[c] & ctype_word) == 0 - ) - RRETURN(MATCH_NOMATCH); - ecode++; - break; - - /* Match a back reference, possibly repeatedly. Look past the end of the - item to see if there is repeat information following. The code is similar - to that for character classes, but repeated for efficiency. Then obey - similar code to character type repeats - written out again for speed. - However, if the referenced string is the empty string, always treat - it as matched, any number of times (otherwise there could be infinite - loops). */ - - case OP_REF: - { - offset = GET2(ecode, 1) << 1; /* Doubled ref number */ - ecode += 3; /* Advance past item */ - - /* If the reference is unset, set the length to be longer than the amount - of subject left; this ensures that every attempt at a match fails. We - can't just fail here, because of the possibility of quantifiers with zero - minima. */ - - length = (offset >= offset_top || md->offset_vector[offset] < 0)? - md->end_subject - eptr + 1 : - md->offset_vector[offset+1] - md->offset_vector[offset]; - - /* Set up for repetition, or handle the non-repeated case */ - - switch (*ecode) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - c = *ecode++ - OP_CRSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - minimize = (*ecode == OP_CRMINRANGE); - min = GET2(ecode, 1); - max = GET2(ecode, 3); - if (max == 0) max = INT_MAX; - ecode += 5; - break; - - default: /* No repeat follows */ - if (!match_ref(offset, eptr, length, md, ims)) RRETURN(MATCH_NOMATCH); - eptr += length; - continue; /* With the main loop */ - } - - /* If the length of the reference is zero, just continue with the - main loop. */ - - if (length == 0) continue; - - /* First, ensure the minimum number of matches are present. We get back - the length of the reference string explicitly rather than passing the - address of eptr, so that eptr can be a register variable. */ - - for (i = 1; i <= min; i++) - { - if (!match_ref(offset, eptr, length, md, ims)) RRETURN(MATCH_NOMATCH); - eptr += length; - } - - /* If min = max, continue at the same level without recursion. - They are not both allowed to be zero. */ - - if (min == max) continue; - - /* If minimizing, keep trying and advancing the pointer */ - - if (minimize) - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || !match_ref(offset, eptr, length, md, ims)) - RRETURN(MATCH_NOMATCH); - eptr += length; - } - /* Control never gets here */ - } - - /* If maximizing, find the longest string and work backwards */ - - else - { - pp = eptr; - for (i = min; i < max; i++) - { - if (!match_ref(offset, eptr, length, md, ims)) break; - eptr += length; - } - while (eptr >= pp) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - eptr -= length; - } - RRETURN(MATCH_NOMATCH); - } - } - /* Control never gets here */ - - - - /* Match a bit-mapped character class, possibly repeatedly. This op code is - used when all the characters in the class have values in the range 0-255. - The only difference between OP_CLASS and OP_NCLASS occurs when a data - character outside the range is encountered. - - First, look past the end of the item to see if there is repeat information - following. Then obey similar code to character type repeats - written out - again for speed. */ - - case OP_NCLASS: - case OP_CLASS: - { - data = ecode + 1; /* Save for matching */ - ecode += 33; /* Advance past the item */ - - switch (*ecode) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - c = *ecode++ - OP_CRSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - minimize = (*ecode == OP_CRMINRANGE); - min = GET2(ecode, 1); - max = GET2(ecode, 3); - if (max == 0) max = INT_MAX; - ecode += 5; - break; - - default: /* No repeat follows */ - min = max = 1; - break; - } - - /* First, ensure the minimum number of matches are present. */ - -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINC(c, eptr); - if (c > 255) - { - if (op == OP_CLASS) RRETURN(MATCH_NOMATCH); - } - else - { - if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); - } - } - } - else -#endif - /* Not UTF-8 mode */ - { - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - c = *eptr++; - if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); - } - } - - /* If max == min we can continue with the main loop without the - need to recurse. */ - - if (min == max) continue; - - /* If minimizing, keep testing the rest of the expression and advancing - the pointer while it matches the class. */ - - if (minimize) - { -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINC(c, eptr); - if (c > 255) - { - if (op == OP_CLASS) RRETURN(MATCH_NOMATCH); - } - else - { - if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); - } - } - } - else -#endif - /* Not UTF-8 mode */ - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - c = *eptr++; - if ((data[c/8] & (1 << (c&7))) == 0) RRETURN(MATCH_NOMATCH); - } - } - /* Control never gets here */ - } - - /* If maximizing, find the longest possible run, then work backwards. */ - - else - { - pp = eptr; - -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len); - if (c > 255) - { - if (op == OP_CLASS) break; - } - else - { - if ((data[c/8] & (1 << (c&7))) == 0) break; - } - eptr += len; - } - for (;;) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (eptr-- == pp) break; /* Stop if tried at original pos */ - BACKCHAR(eptr); - } - } - else -#endif - /* Not UTF-8 mode */ - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject) break; - c = *eptr; - if ((data[c/8] & (1 << (c&7))) == 0) break; - eptr++; - } - while (eptr >= pp) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - eptr--; - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - } - } - - RRETURN(MATCH_NOMATCH); - } - } - /* Control never gets here */ - - - /* Match an extended character class. This opcode is encountered only - in UTF-8 mode, because that's the only time it is compiled. */ - -#ifdef SUPPORT_UTF8 - case OP_XCLASS: - { - data = ecode + 1 + LINK_SIZE; /* Save for matching */ - ecode += GET(ecode, 1); /* Advance past the item */ - - switch (*ecode) - { - case OP_CRSTAR: - case OP_CRMINSTAR: - case OP_CRPLUS: - case OP_CRMINPLUS: - case OP_CRQUERY: - case OP_CRMINQUERY: - c = *ecode++ - OP_CRSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - break; - - case OP_CRRANGE: - case OP_CRMINRANGE: - minimize = (*ecode == OP_CRMINRANGE); - min = GET2(ecode, 1); - max = GET2(ecode, 3); - if (max == 0) max = INT_MAX; - ecode += 5; - break; - - default: /* No repeat follows */ - min = max = 1; - break; - } - - /* First, ensure the minimum number of matches are present. */ - - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINC(c, eptr); - if (!match_xclass(c, data)) RRETURN(MATCH_NOMATCH); - } - - /* If max == min we can continue with the main loop without the - need to recurse. */ - - if (min == max) continue; - - /* If minimizing, keep testing the rest of the expression and advancing - the pointer while it matches the class. */ - - if (minimize) - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINC(c, eptr); - if (!match_xclass(c, data)) RRETURN(MATCH_NOMATCH); - } - /* Control never gets here */ - } - - /* If maximizing, find the longest possible run, then work backwards. */ - - else - { - pp = eptr; - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len); - if (!match_xclass(c, data)) break; - eptr += len; - } - for(;;) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (eptr-- == pp) break; /* Stop if tried at original pos */ - BACKCHAR(eptr) - } - RRETURN(MATCH_NOMATCH); - } - - /* Control never gets here */ - } -#endif /* End of XCLASS */ - - /* Match a run of characters */ - - case OP_CHARS: - { - register int slen = ecode[1]; - ecode += 2; - -#ifdef DEBUG /* Sigh. Some compilers never learn. */ - if (eptr >= md->end_subject) - printf("matching subject against pattern "); - else - { - printf("matching subject "); - pchars(eptr, slen, TRUE, md); - printf(" against pattern "); - } - pchars(ecode, slen, FALSE, md); - printf("\n"); -#endif - - if (slen > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); - if ((ims & PCRE_CASELESS) != 0) - { - while (slen-- > 0) - if (md->lcc[*ecode++] != md->lcc[*eptr++]) - RRETURN(MATCH_NOMATCH); - } - else - { - while (slen-- > 0) if (*ecode++ != *eptr++) RRETURN(MATCH_NOMATCH); - } - } - break; - - /* Match a single character repeatedly; different opcodes share code. */ - - case OP_EXACT: - min = max = GET2(ecode, 1); - ecode += 3; - goto REPEATCHAR; - - case OP_UPTO: - case OP_MINUPTO: - min = 0; - max = GET2(ecode, 1); - minimize = *ecode == OP_MINUPTO; - ecode += 3; - goto REPEATCHAR; - - case OP_STAR: - case OP_MINSTAR: - case OP_PLUS: - case OP_MINPLUS: - case OP_QUERY: - case OP_MINQUERY: - c = *ecode++ - OP_STAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - - /* Common code for all repeated single-character matches. We can give - up quickly if there are fewer than the minimum number of characters left in - the subject. */ - - REPEATCHAR: -#ifdef SUPPORT_UTF8 - if (md->utf8) - { - length = 1; - charptr = ecode; - GETCHARLEN(fc, ecode, length); - if (min * length > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); - ecode += length; - - /* Handle multibyte character matching specially here. There is no - support for any kind of casing for multibyte characters. */ - - if (length > 1) - { - for (i = 1; i <= min; i++) - { - if (memcmp(eptr, charptr, length) != 0) RRETURN(MATCH_NOMATCH); - eptr += length; - } - - if (min == max) continue; - - if (minimize) - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || - eptr >= md->end_subject || - memcmp(eptr, charptr, length) != 0) - RRETURN(MATCH_NOMATCH); - eptr += length; - } - /* Control never gets here */ - } - else - { - pp = eptr; - for (i = min; i < max; i++) - { - if (eptr > md->end_subject - length || - memcmp(eptr, charptr, length) != 0) - break; - eptr += length; - } - while (eptr >= pp) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - eptr -= length; - } - RRETURN(MATCH_NOMATCH); - } - /* Control never gets here */ - } - - /* If the length of a UTF-8 character is 1, we fall through here, and - obey the code as for non-UTF-8 characters below, though in this case the - value of fc will always be < 128. */ - } - else -#endif - - /* When not in UTF-8 mode, load a single-byte character. */ - { - if (min > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); - fc = *ecode++; - } - - /* The value of fc at this point is always less than 256, though we may or - may not be in UTF-8 mode. The code is duplicated for the caseless and - caseful cases, for speed, since matching characters is likely to be quite - common. First, ensure the minimum number of matches are present. If min = - max, continue at the same level without recursing. Otherwise, if - minimizing, keep trying the rest of the expression and advancing one - matching character if failing, up to the maximum. Alternatively, if - maximizing, find the maximum number of characters and work backwards. */ - - DPRINTF(("matching %c{%d,%d} against subject %.*s\n", fc, min, max, - max, eptr)); - - if ((ims & PCRE_CASELESS) != 0) - { - fc = md->lcc[fc]; - for (i = 1; i <= min; i++) - if (fc != md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH); - if (min == max) continue; - if (minimize) - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || eptr >= md->end_subject || - fc != md->lcc[*eptr++]) - RRETURN(MATCH_NOMATCH); - } - /* Control never gets here */ - } - else - { - pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || fc != md->lcc[*eptr]) break; - eptr++; - } - while (eptr >= pp) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - eptr--; - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - } - RRETURN(MATCH_NOMATCH); - } - /* Control never gets here */ - } - - /* Caseful comparisons (includes all multi-byte characters) */ - - else - { - for (i = 1; i <= min; i++) if (fc != *eptr++) RRETURN(MATCH_NOMATCH); - if (min == max) continue; - if (minimize) - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || eptr >= md->end_subject || fc != *eptr++) - RRETURN(MATCH_NOMATCH); - } - /* Control never gets here */ - } - else - { - pp = eptr; - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || fc != *eptr) break; - eptr++; - } - while (eptr >= pp) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - eptr--; - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - } - RRETURN(MATCH_NOMATCH); - } - } - /* Control never gets here */ - - /* Match a negated single one-byte character. The character we are - checking can be multibyte. */ - - case OP_NOT: - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - ecode++; - GETCHARINCTEST(c, eptr); - if ((ims & PCRE_CASELESS) != 0) - { -#ifdef SUPPORT_UTF8 - if (c < 256) -#endif - c = md->lcc[c]; - if (md->lcc[*ecode++] == c) RRETURN(MATCH_NOMATCH); - } - else - { - if (*ecode++ == c) RRETURN(MATCH_NOMATCH); - } - break; - - /* Match a negated single one-byte character repeatedly. This is almost a - repeat of the code for a repeated single character, but I haven't found a - nice way of commoning these up that doesn't require a test of the - positive/negative option for each character match. Maybe that wouldn't add - very much to the time taken, but character matching *is* what this is all - about... */ - - case OP_NOTEXACT: - min = max = GET2(ecode, 1); - ecode += 3; - goto REPEATNOTCHAR; - - case OP_NOTUPTO: - case OP_NOTMINUPTO: - min = 0; - max = GET2(ecode, 1); - minimize = *ecode == OP_NOTMINUPTO; - ecode += 3; - goto REPEATNOTCHAR; - - case OP_NOTSTAR: - case OP_NOTMINSTAR: - case OP_NOTPLUS: - case OP_NOTMINPLUS: - case OP_NOTQUERY: - case OP_NOTMINQUERY: - c = *ecode++ - OP_NOTSTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - - /* Common code for all repeated single-character (less than 255) matches. - We can give up quickly if there are fewer than the minimum number of - characters left in the subject. */ - - REPEATNOTCHAR: - if (min > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); - fc = *ecode++; - - /* The code is duplicated for the caseless and caseful cases, for speed, - since matching characters is likely to be quite common. First, ensure the - minimum number of matches are present. If min = max, continue at the same - level without recursing. Otherwise, if minimizing, keep trying the rest of - the expression and advancing one matching character if failing, up to the - maximum. Alternatively, if maximizing, find the maximum number of - characters and work backwards. */ - - DPRINTF(("negative matching %c{%d,%d} against subject %.*s\n", fc, min, max, - max, eptr)); - - if ((ims & PCRE_CASELESS) != 0) - { - fc = md->lcc[fc]; - -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - register int d; - for (i = 1; i <= min; i++) - { - GETCHARINC(d, eptr); - if (d < 256) d = md->lcc[d]; - if (fc == d) RRETURN(MATCH_NOMATCH); - } - } - else -#endif - - /* Not UTF-8 mode */ - { - for (i = 1; i <= min; i++) - if (fc == md->lcc[*eptr++]) RRETURN(MATCH_NOMATCH); - } - - if (min == max) continue; - - if (minimize) - { -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - register int d; - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - GETCHARINC(d, eptr); - if (d < 256) d = md->lcc[d]; - if (fi >= max || eptr >= md->end_subject || fc == d) - RRETURN(MATCH_NOMATCH); - } - } - else -#endif - /* Not UTF-8 mode */ - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || eptr >= md->end_subject || fc == md->lcc[*eptr++]) - RRETURN(MATCH_NOMATCH); - } - } - /* Control never gets here */ - } - - /* Maximize case */ - - else - { - pp = eptr; - -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - register int d; - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(d, eptr, len); - if (d < 256) d = md->lcc[d]; - if (fc == d) break; - eptr += len; - } - for(;;) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (eptr-- == pp) break; /* Stop if tried at original pos */ - BACKCHAR(eptr); - } - } - else -#endif - /* Not UTF-8 mode */ - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || fc == md->lcc[*eptr]) break; - eptr++; - } - while (eptr >= pp) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - eptr--; - } - } - - RRETURN(MATCH_NOMATCH); - } - /* Control never gets here */ - } - - /* Caseful comparisons */ - - else - { -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - register int d; - for (i = 1; i <= min; i++) - { - GETCHARINC(d, eptr); - if (fc == d) RRETURN(MATCH_NOMATCH); - } - } - else -#endif - /* Not UTF-8 mode */ - { - for (i = 1; i <= min; i++) - if (fc == *eptr++) RRETURN(MATCH_NOMATCH); - } - - if (min == max) continue; - - if (minimize) - { -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - register int d; - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - GETCHARINC(d, eptr); - if (fi >= max || eptr >= md->end_subject || fc == d) - RRETURN(MATCH_NOMATCH); - } - } - else -#endif - /* Not UTF-8 mode */ - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || eptr >= md->end_subject || fc == *eptr++) - RRETURN(MATCH_NOMATCH); - } - } - /* Control never gets here */ - } - - /* Maximize case */ - - else - { - pp = eptr; - -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - register int d; - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(d, eptr, len); - if (fc == d) break; - eptr += len; - } - for(;;) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (eptr-- == pp) break; /* Stop if tried at original pos */ - BACKCHAR(eptr); - } - } - else -#endif - /* Not UTF-8 mode */ - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || fc == *eptr) break; - eptr++; - } - while (eptr >= pp) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - eptr--; - } - } - - RRETURN(MATCH_NOMATCH); - } - } - /* Control never gets here */ - - /* Match a single character type repeatedly; several different opcodes - share code. This is very similar to the code for single characters, but we - repeat it in the interests of efficiency. */ - - case OP_TYPEEXACT: - min = max = GET2(ecode, 1); - minimize = TRUE; - ecode += 3; - goto REPEATTYPE; - - case OP_TYPEUPTO: - case OP_TYPEMINUPTO: - min = 0; - max = GET2(ecode, 1); - minimize = *ecode == OP_TYPEMINUPTO; - ecode += 3; - goto REPEATTYPE; - - case OP_TYPESTAR: - case OP_TYPEMINSTAR: - case OP_TYPEPLUS: - case OP_TYPEMINPLUS: - case OP_TYPEQUERY: - case OP_TYPEMINQUERY: - c = *ecode++ - OP_TYPESTAR; - minimize = (c & 1) != 0; - min = rep_min[c]; /* Pick up values from tables; */ - max = rep_max[c]; /* zero for max => infinity */ - if (max == 0) max = INT_MAX; - - /* Common code for all repeated single character type matches. Note that - in UTF-8 mode, '.' matches a character of any length, but for the other - character types, the valid characters are all one-byte long. */ - - REPEATTYPE: - ctype = *ecode++; /* Code for the character type */ - - /* First, ensure the minimum number of matches are present. Use inline - code for maximizing the speed, and do the type test once at the start - (i.e. keep it out of the loop). Also we can test that there are at least - the minimum number of bytes before we start. This isn't as effective in - UTF-8 mode, but it does no harm. Separate the UTF-8 code completely as that - is tidier. */ - - if (min > md->end_subject - eptr) RRETURN(MATCH_NOMATCH); - if (min > 0) - { -#ifdef SUPPORT_UTF8 - if (md->utf8) switch(ctype) - { - case OP_ANY: - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject || - (*eptr++ == NEWLINE && (ims & PCRE_DOTALL) == 0)) - RRETURN(MATCH_NOMATCH); - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - break; - - case OP_ANYBYTE: - eptr += min; - break; - - case OP_NOT_DIGIT: - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - GETCHARINC(c, eptr); - if (c < 256 && (md->ctypes[c] & ctype_digit) != 0) - RRETURN(MATCH_NOMATCH); - } - break; - - case OP_DIGIT: - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject || - *eptr >= 128 || (md->ctypes[*eptr++] & ctype_digit) == 0) - RRETURN(MATCH_NOMATCH); - /* No need to skip more bytes - we know it's a 1-byte character */ - } - break; - - case OP_NOT_WHITESPACE: - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject || - (*eptr < 128 && (md->ctypes[*eptr++] & ctype_space) != 0)) - RRETURN(MATCH_NOMATCH); - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - break; - - case OP_WHITESPACE: - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject || - *eptr >= 128 || (md->ctypes[*eptr++] & ctype_space) == 0) - RRETURN(MATCH_NOMATCH); - /* No need to skip more bytes - we know it's a 1-byte character */ - } - break; - - case OP_NOT_WORDCHAR: - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject || - (*eptr < 128 && (md->ctypes[*eptr++] & ctype_word) != 0)) - RRETURN(MATCH_NOMATCH); - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - break; - - case OP_WORDCHAR: - for (i = 1; i <= min; i++) - { - if (eptr >= md->end_subject || - *eptr >= 128 || (md->ctypes[*eptr++] & ctype_word) == 0) - RRETURN(MATCH_NOMATCH); - /* No need to skip more bytes - we know it's a 1-byte character */ - } - break; - } - else -#endif - - /* Code for the non-UTF-8 case for minimum matching */ - - switch(ctype) - { - case OP_ANY: - if ((ims & PCRE_DOTALL) == 0) - { - for (i = 1; i <= min; i++) - if (*eptr++ == NEWLINE) RRETURN(MATCH_NOMATCH); - } - else eptr += min; - break; - - case OP_ANYBYTE: - eptr += min; - break; - - case OP_NOT_DIGIT: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_digit) != 0) RRETURN(MATCH_NOMATCH); - break; - - case OP_DIGIT: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_digit) == 0) RRETURN(MATCH_NOMATCH); - break; - - case OP_NOT_WHITESPACE: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_space) != 0) RRETURN(MATCH_NOMATCH); - break; - - case OP_WHITESPACE: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_space) == 0) RRETURN(MATCH_NOMATCH); - break; - - case OP_NOT_WORDCHAR: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_word) != 0) - RRETURN(MATCH_NOMATCH); - break; - - case OP_WORDCHAR: - for (i = 1; i <= min; i++) - if ((md->ctypes[*eptr++] & ctype_word) == 0) - RRETURN(MATCH_NOMATCH); - break; - } - } - - /* If min = max, continue at the same level without recursing */ - - if (min == max) continue; - - /* If minimizing, we have to test the rest of the pattern before each - subsequent match. Again, separate the UTF-8 case for speed. */ - - if (minimize) - { -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - if (md->utf8) - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - - GETCHARINC(c, eptr); - switch(ctype) - { - case OP_ANY: - if ((ims & PCRE_DOTALL) == 0 && c == NEWLINE) RRETURN(MATCH_NOMATCH); - break; - - case OP_ANYBYTE: - break; - - case OP_NOT_DIGIT: - if (c < 256 && (md->ctypes[c] & ctype_digit) != 0) - RRETURN(MATCH_NOMATCH); - break; - - case OP_DIGIT: - if (c >= 256 || (md->ctypes[c] & ctype_digit) == 0) - RRETURN(MATCH_NOMATCH); - break; - - case OP_NOT_WHITESPACE: - if (c < 256 && (md->ctypes[c] & ctype_space) != 0) - RRETURN(MATCH_NOMATCH); - break; - - case OP_WHITESPACE: - if (c >= 256 || (md->ctypes[c] & ctype_space) == 0) - RRETURN(MATCH_NOMATCH); - break; - - case OP_NOT_WORDCHAR: - if (c < 256 && (md->ctypes[c] & ctype_word) != 0) - RRETURN(MATCH_NOMATCH); - break; - - case OP_WORDCHAR: - if (c >= 256 && (md->ctypes[c] & ctype_word) == 0) - RRETURN(MATCH_NOMATCH); - break; - } - } - } - else -#endif - /* Not UTF-8 mode */ - { - for (fi = min;; fi++) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (fi >= max || eptr >= md->end_subject) RRETURN(MATCH_NOMATCH); - c = *eptr++; - switch(ctype) - { - case OP_ANY: - if ((ims & PCRE_DOTALL) == 0 && c == NEWLINE) RRETURN(MATCH_NOMATCH); - break; - - case OP_ANYBYTE: - break; - - case OP_NOT_DIGIT: - if ((md->ctypes[c] & ctype_digit) != 0) RRETURN(MATCH_NOMATCH); - break; - - case OP_DIGIT: - if ((md->ctypes[c] & ctype_digit) == 0) RRETURN(MATCH_NOMATCH); - break; - - case OP_NOT_WHITESPACE: - if ((md->ctypes[c] & ctype_space) != 0) RRETURN(MATCH_NOMATCH); - break; - - case OP_WHITESPACE: - if ((md->ctypes[c] & ctype_space) == 0) RRETURN(MATCH_NOMATCH); - break; - - case OP_NOT_WORDCHAR: - if ((md->ctypes[c] & ctype_word) != 0) RRETURN(MATCH_NOMATCH); - break; - - case OP_WORDCHAR: - if ((md->ctypes[c] & ctype_word) == 0) RRETURN(MATCH_NOMATCH); - break; - } - } - } - /* Control never gets here */ - } - - /* If maximizing it is worth using inline code for speed, doing the type - test once at the start (i.e. keep it out of the loop). Again, keep the - UTF-8 stuff separate. */ - - else - { - pp = eptr; - -#ifdef SUPPORT_UTF8 - /* UTF-8 mode */ - - if (md->utf8) - { - switch(ctype) - { - case OP_ANY: - - /* Special code is required for UTF8, but when the maximum is unlimited - we don't need it, so we repeat the non-UTF8 code. This is probably - worth it, because .* is quite a common idiom. */ - - if (max < INT_MAX) - { - if ((ims & PCRE_DOTALL) == 0) - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || *eptr == NEWLINE) break; - eptr++; - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - } - else - { - for (i = min; i < max; i++) - { - eptr++; - while (eptr < md->end_subject && (*eptr & 0xc0) == 0x80) eptr++; - } - } - } - - /* Handle unlimited UTF-8 repeat */ - - else - { - if ((ims & PCRE_DOTALL) == 0) - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || *eptr == NEWLINE) break; - eptr++; - } - break; - } - else - { - c = max - min; - if (c > md->end_subject - eptr) c = md->end_subject - eptr; - eptr += c; - } - } - break; - - /* The byte case is the same as non-UTF8 */ - - case OP_ANYBYTE: - c = max - min; - if (c > md->end_subject - eptr) c = md->end_subject - eptr; - eptr += c; - break; - - case OP_NOT_DIGIT: - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len); - if (c < 256 && (md->ctypes[c] & ctype_digit) != 0) break; - eptr+= len; - } - break; - - case OP_DIGIT: - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len); - if (c >= 256 ||(md->ctypes[c] & ctype_digit) == 0) break; - eptr+= len; - } - break; - - case OP_NOT_WHITESPACE: - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len); - if (c < 256 && (md->ctypes[c] & ctype_space) != 0) break; - eptr+= len; - } - break; - - case OP_WHITESPACE: - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len); - if (c >= 256 ||(md->ctypes[c] & ctype_space) == 0) break; - eptr+= len; - } - break; - - case OP_NOT_WORDCHAR: - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len); - if (c < 256 && (md->ctypes[c] & ctype_word) != 0) break; - eptr+= len; - } - break; - - case OP_WORDCHAR: - for (i = min; i < max; i++) - { - int len = 1; - if (eptr >= md->end_subject) break; - GETCHARLEN(c, eptr, len); - if (c >= 256 || (md->ctypes[c] & ctype_word) == 0) break; - eptr+= len; - } - break; - } - - /* eptr is now past the end of the maximum run */ - - for(;;) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - if (eptr-- == pp) break; /* Stop if tried at original pos */ - BACKCHAR(eptr); - } - } - else -#endif - - /* Not UTF-8 mode */ - { - switch(ctype) - { - case OP_ANY: - if ((ims & PCRE_DOTALL) == 0) - { - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || *eptr == NEWLINE) break; - eptr++; - } - break; - } - /* For DOTALL case, fall through and treat as \C */ - - case OP_ANYBYTE: - c = max - min; - if (c > md->end_subject - eptr) c = md->end_subject - eptr; - eptr += c; - break; - - case OP_NOT_DIGIT: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) != 0) - break; - eptr++; - } - break; - - case OP_DIGIT: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_digit) == 0) - break; - eptr++; - } - break; - - case OP_NOT_WHITESPACE: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) != 0) - break; - eptr++; - } - break; - - case OP_WHITESPACE: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_space) == 0) - break; - eptr++; - } - break; - - case OP_NOT_WORDCHAR: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) != 0) - break; - eptr++; - } - break; - - case OP_WORDCHAR: - for (i = min; i < max; i++) - { - if (eptr >= md->end_subject || (md->ctypes[*eptr] & ctype_word) == 0) - break; - eptr++; - } - break; - } - - /* eptr is now past the end of the maximum run */ - - while (eptr >= pp) - { - RMATCH(rrc, eptr, ecode, offset_top, md, ims, eptrb, 0); - eptr--; - if (rrc != MATCH_NOMATCH) RRETURN(rrc); - } - } - - /* Get here if we can't make it match with any permitted repetitions */ - - RRETURN(MATCH_NOMATCH); - } - /* Control never gets here */ - - /* There's been some horrible disaster. Since all codes > OP_BRA are - for capturing brackets, and there shouldn't be any gaps between 0 and - OP_BRA, arrival here can only mean there is something seriously wrong - in the code above or the OP_xxx definitions. */ - - default: - DPRINTF(("Unknown opcode %d\n", *ecode)); - RRETURN(PCRE_ERROR_UNKNOWN_NODE); - } - - /* Do not stick any code in here without much thought; it is assumed - that "continue" in the code above comes out to here to repeat the main - loop. */ - - } /* End of main loop */ -/* Control never reaches here */ -} - - -/*************************************************************************** -**************************************************************************** - RECURSION IN THE match() FUNCTION - -Undefine all the macros that were defined above to handle this. */ - -#ifdef NO_RECURSE -#undef eptr -#undef ecode -#undef offset_top -#undef ims -#undef eptrb -#undef flags - -#undef callpat -#undef charptr -#undef data -#undef lastptr -#undef next -#undef pp -#undef prev -#undef saved_eptr - -#undef new_recursive - -#undef cur_is_word -#undef condition -#undef minimize -#undef prev_is_word - -#undef original_ims - -#undef ctype -#undef length -#undef max -#undef min -#undef number -#undef offset -#undef op -#undef save_capture_last -#undef save_offset1 -#undef save_offset2 -#undef save_offset3 -#undef stacksave - -#undef newptrb - -#endif - -/* These two are defined as macros in both cases */ - -#undef fc -#undef fi - -/*************************************************************************** -***************************************************************************/ - - - -/************************************************* -* Execute a Regular Expression * -*************************************************/ - -/* This function applies a compiled re to a subject string and picks out -portions of the string if it matches. Two elements in the vector are set for -each substring: the offsets to the start and end of the substring. - -Arguments: - external_re points to the compiled expression - extra_data points to extra data or is NULL - subject points to the subject string - length length of subject string (may contain binary zeros) - start_offset where to start in the subject string - options option bits - offsets points to a vector of ints to be filled in with offsets - offsetcount the number of elements in the vector - -Returns: > 0 => success; value is the number of elements filled in - = 0 => success, but offsets is not big enough - -1 => failed to match - < -1 => some kind of unexpected problem -*/ - -EXPORT int -pcre_exec(const pcre *external_re, const pcre_extra *extra_data, - const char *subject, int length, int start_offset, int options, int *offsets, - int offsetcount) -{ -int rc, resetcount, ocount; -int first_byte = -1; -int req_byte = -1; -int req_byte2 = -1; -unsigned long int ims = 0; -BOOL using_temporary_offsets = FALSE; -BOOL anchored; -BOOL startline; -BOOL first_byte_caseless = FALSE; -BOOL req_byte_caseless = FALSE; -match_data match_block; -const uschar *start_bits = NULL; -const uschar *start_match = (const uschar *)subject + start_offset; -const uschar *end_subject; -const uschar *req_byte_ptr = start_match - 1; -const pcre_study_data *study; -const real_pcre *re = (const real_pcre *)external_re; - -/* Plausibility checks */ - -if ((options & ~PUBLIC_EXEC_OPTIONS) != 0) return PCRE_ERROR_BADOPTION; -if (re == NULL || subject == NULL || - (offsets == NULL && offsetcount > 0)) return PCRE_ERROR_NULL; - -/* Fish out the optional data from the extra_data structure, first setting -the default values. */ - -study = NULL; -match_block.match_limit = MATCH_LIMIT; -match_block.callout_data = NULL; - -if (extra_data != NULL) - { - register unsigned int flags = extra_data->flags; - if ((flags & PCRE_EXTRA_STUDY_DATA) != 0) - study = (const pcre_study_data *)extra_data->study_data; - if ((flags & PCRE_EXTRA_MATCH_LIMIT) != 0) - match_block.match_limit = extra_data->match_limit; - if ((flags & PCRE_EXTRA_CALLOUT_DATA) != 0) - match_block.callout_data = extra_data->callout_data; - } - -/* Now we have re supposedly pointing to the regex */ - -if (re->magic_number != MAGIC_NUMBER) return PCRE_ERROR_BADMAGIC; - -anchored = ((re->options | options) & PCRE_ANCHORED) != 0; -startline = (re->options & PCRE_STARTLINE) != 0; - -match_block.start_code = - (const uschar *)re + sizeof(real_pcre) + re->name_count * re->name_entry_size; -match_block.start_subject = (const uschar *)subject; -match_block.start_offset = start_offset; -match_block.end_subject = match_block.start_subject + length; -end_subject = match_block.end_subject; - -match_block.endonly = (re->options & PCRE_DOLLAR_ENDONLY) != 0; -match_block.utf8 = (re->options & PCRE_UTF8) != 0; - -match_block.notbol = (options & PCRE_NOTBOL) != 0; -match_block.noteol = (options & PCRE_NOTEOL) != 0; -match_block.notempty = (options & PCRE_NOTEMPTY) != 0; - -match_block.recursive = NULL; /* No recursion at top level */ - -match_block.lcc = re->tables + lcc_offset; -match_block.ctypes = re->tables + ctypes_offset; - -/* Check a UTF-8 string if required. Unfortunately there's no way of passing -back the character offset. */ - -#ifdef SUPPORT_UTF8 -if (match_block.utf8 && (options & PCRE_NO_UTF8_CHECK) == 0) - { - if (valid_utf8((uschar *)subject, length) >= 0) - return PCRE_ERROR_BADUTF8; - if (start_offset > 0 && start_offset < length) - { - int tb = ((uschar *)subject)[start_offset]; - if (tb > 127) - { - tb &= 0xc0; - if (tb != 0 && tb != 0xc0) return PCRE_ERROR_BADUTF8_OFFSET; - } - } - } -#endif - -/* The ims options can vary during the matching as a result of the presence -of (?ims) items in the pattern. They are kept in a local variable so that -restoring at the exit of a group is easy. */ - -ims = re->options & (PCRE_CASELESS|PCRE_MULTILINE|PCRE_DOTALL); - -/* If the expression has got more back references than the offsets supplied can -hold, we get a temporary bit of working store to use during the matching. -Otherwise, we can use the vector supplied, rounding down its size to a multiple -of 3. */ - -ocount = offsetcount - (offsetcount % 3); - -if (re->top_backref > 0 && re->top_backref >= ocount/3) - { - ocount = re->top_backref * 3 + 3; - match_block.offset_vector = (int *)(pcre_malloc)(ocount * sizeof(int)); - if (match_block.offset_vector == NULL) return PCRE_ERROR_NOMEMORY; - using_temporary_offsets = TRUE; - DPRINTF(("Got memory to hold back references\n")); - } -else match_block.offset_vector = offsets; - -match_block.offset_end = ocount; -match_block.offset_max = (2*ocount)/3; -match_block.offset_overflow = FALSE; -match_block.capture_last = -1; - -/* Compute the minimum number of offsets that we need to reset each time. Doing -this makes a huge difference to execution time when there aren't many brackets -in the pattern. */ - -resetcount = 2 + re->top_bracket * 2; -if (resetcount > offsetcount) resetcount = ocount; - -/* Reset the working variable associated with each extraction. These should -never be used unless previously set, but they get saved and restored, and so we -initialize them to avoid reading uninitialized locations. */ - -if (match_block.offset_vector != NULL) - { - register int *iptr = match_block.offset_vector + ocount; - register int *iend = iptr - resetcount/2 + 1; - while (--iptr >= iend) *iptr = -1; - } - -/* Set up the first character to match, if available. The first_byte value is -never set for an anchored regular expression, but the anchoring may be forced -at run time, so we have to test for anchoring. The first char may be unset for -an unanchored pattern, of course. If there's no first char and the pattern was -studied, there may be a bitmap of possible first characters. */ - -if (!anchored) - { - if ((re->options & PCRE_FIRSTSET) != 0) - { - first_byte = re->first_byte & 255; - if ((first_byte_caseless = ((re->first_byte & REQ_CASELESS) != 0)) == TRUE) - first_byte = match_block.lcc[first_byte]; - } - else - if (!startline && study != NULL && - (study->options & PCRE_STUDY_MAPPED) != 0) - start_bits = study->start_bits; - } - -/* For anchored or unanchored matches, there may be a "last known required -character" set. */ - -if ((re->options & PCRE_REQCHSET) != 0) - { - req_byte = re->req_byte & 255; - req_byte_caseless = (re->req_byte & REQ_CASELESS) != 0; - req_byte2 = (re->tables + fcc_offset)[req_byte]; /* case flipped */ - } - -/* Loop for handling unanchored repeated matching attempts; for anchored regexs -the loop runs just once. */ - -do - { - register int *iptr = match_block.offset_vector; - register int *iend = iptr + resetcount; - - /* Reset the maximum number of extractions we might see. */ - - while (iptr < iend) *iptr++ = -1; - - /* Advance to a unique first char if possible */ - - if (first_byte >= 0) - { - if (first_byte_caseless) - while (start_match < end_subject && - match_block.lcc[*start_match] != first_byte) - start_match++; - else - while (start_match < end_subject && *start_match != first_byte) - start_match++; - } - - /* Or to just after \n for a multiline match if possible */ - - else if (startline) - { - if (start_match > match_block.start_subject + start_offset) - { - while (start_match < end_subject && start_match[-1] != NEWLINE) - start_match++; - } - } - - /* Or to a non-unique first char after study */ - - else if (start_bits != NULL) - { - while (start_match < end_subject) - { - register int c = *start_match; - if ((start_bits[c/8] & (1 << (c&7))) == 0) start_match++; else break; - } - } - -#ifdef DEBUG /* Sigh. Some compilers never learn. */ - printf(">>>> Match against: "); - pchars(start_match, end_subject - start_match, TRUE, &match_block); - printf("\n"); -#endif - - /* If req_byte is set, we know that that character must appear in the subject - for the match to succeed. If the first character is set, req_byte must be - later in the subject; otherwise the test starts at the match point. This - optimization can save a huge amount of backtracking in patterns with nested - unlimited repeats that aren't going to match. Writing separate code for - cased/caseless versions makes it go faster, as does using an autoincrement - and backing off on a match. - - HOWEVER: when the subject string is very, very long, searching to its end can - take a long time, and give bad performance on quite ordinary patterns. This - showed up when somebody was matching /^C/ on a 32-megabyte string... so we - don't do this when the string is sufficiently long. */ - - if (req_byte >= 0 && end_subject - start_match < REQ_BYTE_MAX) - { - register const uschar *p = start_match + ((first_byte >= 0)? 1 : 0); - - /* We don't need to repeat the search if we haven't yet reached the - place we found it at last time. */ - - if (p > req_byte_ptr) - { - if (req_byte_caseless) - { - while (p < end_subject) - { - register int pp = *p++; - if (pp == req_byte || pp == req_byte2) { p--; break; } - } - } - else - { - while (p < end_subject) - { - if (*p++ == req_byte) { p--; break; } - } - } - - /* If we can't find the required character, break the matching loop */ - - if (p >= end_subject) break; - - /* If we have found the required character, save the point where we - found it, so that we don't search again next time round the loop if - the start hasn't passed this character yet. */ - - req_byte_ptr = p; - } - } - - /* When a match occurs, substrings will be set for all internal extractions; - we just need to set up the whole thing as substring 0 before returning. If - there were too many extractions, set the return code to zero. In the case - where we had to get some local store to hold offsets for backreferences, copy - those back references that we can. In this case there need not be overflow - if certain parts of the pattern were not used. */ - - match_block.start_match = start_match; - match_block.match_call_count = 0; - - rc = match(start_match, match_block.start_code, 2, &match_block, ims, NULL, - match_isgroup); - - if (rc == MATCH_NOMATCH) - { - start_match++; -#ifdef SUPPORT_UTF8 - if (match_block.utf8) - while((*start_match & 0xc0) == 0x80) start_match++; -#endif - continue; - } - - if (rc != MATCH_MATCH) - { - DPRINTF((">>>> error: returning %d\n", rc)); - return rc; - } - - /* We have a match! Copy the offset information from temporary store if - necessary */ - - if (using_temporary_offsets) - { - if (offsetcount >= 4) - { - memcpy(offsets + 2, match_block.offset_vector + 2, - (offsetcount - 2) * sizeof(int)); - DPRINTF(("Copied offsets from temporary memory\n")); - } - if (match_block.end_offset_top > offsetcount) - match_block.offset_overflow = TRUE; - - DPRINTF(("Freeing temporary memory\n")); - (pcre_free)(match_block.offset_vector); - } - - rc = match_block.offset_overflow? 0 : match_block.end_offset_top/2; - - if (offsetcount < 2) rc = 0; else - { - offsets[0] = start_match - match_block.start_subject; - offsets[1] = match_block.end_match_ptr - match_block.start_subject; - } - - DPRINTF((">>>> returning %d\n", rc)); - return rc; - } - -/* This "while" is the end of the "do" above */ - -while (!anchored && start_match <= end_subject); - -if (using_temporary_offsets) - { - DPRINTF(("Freeing temporary memory\n")); - (pcre_free)(match_block.offset_vector); - } - -DPRINTF((">>>> returning PCRE_ERROR_NOMATCH\n")); - -return PCRE_ERROR_NOMATCH; -} - -/* End of pcre.c */ -- cgit v1.2.3-54-g00ecf